Jump to content
SAU Community

Recommended Posts

IMG_0238.thumb.JPG.b41e594d9c112cb66ed64b843cac31e6.JPG

Sunday 23rd April 2023 8:30am Capped 24 entries
Standard Entry Fee: $89
Members Entry Fee: $55 (SAU Victoria Only)
Entries Close: Saturday, 22nd April 2023 11:00am

Supp Regs: Download

Disclaimer: Download  Please electronically sign and email to [email protected] or print and hand in and Driver Sign In.

Additional Info: For any questions, please email [email protected]

To compete in this event you will require

A valid Motorsport Australia L2S Licence or AASA licence (Day license is $35.00 via the AASA Website)

A helmet, long sleeve clothing and it is reccomended a 1KG mounted fire extinguisher (But not Mandatory).

Further details within Supp Regs Above.

You can bring and have a passenger in the car but they need to comply to the same safety and clothing as driver.

Entry List:

1. Annabel Schulze - R31 Skyline
2. Luke Schulze - R31 Skyline
3. Tien Le - GR Yaris
4. Ben Simmons - Subaru BRZ
5. Shivam Rohit - R32 GT-R
6. Sean Power - Renault Skyline v35
7. Min Chan - Lotus Elise
8. Simon Beetham - R31 Skyline
9.  Alan Calleja - R33 GTS-T
10. Russell Cunningham - R32 Skyline
11.  Mark Ryan - R33 GTS-T
12. Sime - Nissan 350z
13. Adrian Mueller - Subaru
14. Ben Wells - WRX STI
15. Peter Canfield - WRX STI
16. Samuel Thompson - R31 Skyline
17. Robert Nigro - R32 GTS-T
18. Clifford newman - Subaru BRZ
19. Neil Gray - 180SX
20. Michael Garland - Subaru
21. Ryan Bell - 350Z
22. Leon Stapley - Ford cortina
23. Krystal Pfeiffer - 
24. Daniel Medved - WRX

Reserve list:
1. Michael Dunbar R34 GTT
2. Mnan Nguyen - 86
3. Peter Bylthe - S14
4. Jeremty Blackman - R33

Edited by acsplit
  • Like 2

Event schedule and maps have been sent out. Along with a reminder to send back a signed disclaimer.

If any entrants can't make it you have until midight tomorrow friday for a refund so we can pass the spot onto people waiting.

  • 2 weeks later...
Sorry work has consumed my life for the past few weeks.
 
Thanks to everyone for attending, I hope you all had some fun and it's good to see the competitive nature coming back. 
We are investigating an official timing system so we can possibly streamline this a lot more as we plan to ramp up to a 3 or 4 round championship now we have multiple good venues in Victoria to use for next year.
 
We have emailed out links to the high res pictures and videos for your personal use along with the detailed results sheet.
 
Our next event is in September @PranK
 
Screenshot 2023-05-05 8.39.15 PM.pngScreenshot 2023-05-05 8.39.55 PM.png

 

IMG_0113.JPG

IMG_0200.JPG

IMG_0276.JPG

IMG_0365.JPG

IMG_0380.JPG

IMG_0391.JPG

IMG_0413.JPG

IMG_0494.JPG

IMG_0540.JPG

IMG_0610.JPG

IMG_0679.JPG

IMG_0900.JPG

IMG_0914.JPG

IMG_1057.JPG

IMG_1244.JPG

IMG_1317.JPG

IMG_1441.JPG

IMG_1490.JPG



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...