Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...

A/F Correct and A/F Learn will be your short term and long term fuel trims. These are the learnings of the ECU from closed loop O2 sensor feedback as to how wrong the "as mapped" fuelling is. Which is intended to account for problems with dirty injectors, engine condition change over time etc etc.

As to which is which..If I had to guess I'd say Correction was short term and Learn was long term.

Ignition is just ignition timing in degrees before top dead centre.

Alright sweet that makes sense, any idea how I could work out the ratio or should I just put an external A/F gauge in? Is the 85% on the A/F learn something I should be worried about? Been sitting at that since I first got the car at the start of the year.

8 hours ago, Inxlusion said:

Alright sweet that makes sense, any idea how I could work out the ratio or should I just put an external A/F gauge in? Is the 85% on the A/F learn something I should be worried about? Been sitting at that since I first got the car at the start of the year.

If you were keen to see what your air fuel ratio is, you're only real option is to install a wideband o2 sensor and a control unit/display/gauge. 

It's worth mentioning, if you were planning to buy an aftermarket ECU sometime in the future, I'd think about holding off on buying the wideband until you get the ECU. Then get the ECU with a built in wideband sensor or buy the associated CAN based sensor. 

The standalone wideband gauges can be plumbed into an aftermarket ECU, but they are a bit shit compared to a wideband that is operating over a CAN network or is built into the ECU (voltage offset errors are a nightmare, there is not fault reporting to the ECU, etc). 

Regarding the 82% learn reading, if the car is running fine otherwise, I wouldn't be too worried about it. The gauges aren't giving you enough information to be able to work out if there is something you should be worried about regarding the air/fuel mixtures. Getting the external wideband o2 gauge would give you the information you needed to work out if something was wrong with the AFR. 

  • Like 1

Not really to fussed about it not really to tune it or anything yet so not a priority just trying to work out what's what I guess. I have a gready emanage sitting there waiting to go in so I will look into how everyone's running their af gauge with them. 

Thanks for all the info everyone really appreciate it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...a bit a "development" on the brakes. I spoke to the guys where i get brakes from...and they are saying that 296mm EBC are for R34 GT-T. I then went to their site: https://www.ebcbrakes.com/vehicle/uk-row/NISSAN/Skyline (R34)/ and search for my car(R34 GT 1998 - it has GTT brakes) and it show me this USR1229 number and they are rly 296mm rotors... So now iam rly confused... The rotors i have now on the car are 310mm asi shown... So where is the problem? Does the whole EBC got it wrong or my calipers are just...idk know what?  
    • Oh What the hell, I used to get a "are you sure you want to reply, this thread is XX months old" message. Maybe a software update remove that. My bad.
    • This is a recipe for disaster* Note: Disaster is relative. The thing that often gets lost in threads like this is what is considered acceptable poke and compromise between what one person considers 'good' looks and what someone else does. The quoted specs would sit absurdly outside the guards with the spacers mentioned and need  REALLY thin tyres and a LOT of camber AND rolling the guards to fit. Some people love this. Some people consider this a ruined car. One thing is for certain though, rolling the guards is pretty much mandatory for any 'good' fitment (of either variety). It is often the difference between any fitment remotely close to the guards. "Not to mention the rears were like a mm from hitting the coilovers." I have a question though - This spec is VERY close to what I was planning to buy relative to the inboard suspension - I have an offset measuring tool on the way to confirm it. When you say "like a mm" do you mean literally 1mm? Or 2mm? Cause that's enough clearance for me in the rear :p I actually found the more limiting factor ISNT the coilover but the actual suspension arms. Did you take a look at how close those were?
    • @GTSBoy yeah sorry i know thery are known for colors bud those DBA are too in colors 🙂 Green will be good enough for me  
    • That's my life. Past-Duncan has a lot to answer for
×
×
  • Create New...