Jump to content
SAU Community

Rb20det idling then dieing and refusing to start

A31cefiroNZ

By A31cefiroNZ,
in General Maintenance

 Share

Recommended Posts

A31cefiroNZ Contributor

A31cefiroNZ

Posted
Posted

Hey all so will give you a quick rundown so I have an rb20det, she starts occasionally idles for a few minutes then shuts off and refuses to start again, now I have go one wires, piping, put new cas sensor, new afm, new sparks, new fuelpump, new ecu, 02 sensor, i pulled the fuel filter off and bypassed it still nothing, puthave tried resetting the ecu, have no bloody luck with it at all, will attach a video on it hopefully it help you rb gurus, any info would be appreciated just trying to get the girl running, cheers heaps team, much appreciated 

 

 

 

GTSBoy Grand Master

GTSBoy

Posted
Posted

Video is not working here either. Just the sound.

From PM

"Have you got your fuel lines hooked up the right way around? The in and the out are both at the front there, and there is an FPR on the outlet end and there is a pulsation damper at the inlet end. The inlet goes into the front end of the rail and the outlet comes out of the back end and then runs back up to the front. If you hook it up backwards, it won't work. "

joshuaho96 Veteran

joshuaho96

Posted
Posted

It doesn't sound like fuel pressure slowly bleeding off. If you pull fuel pump there will be a moment where it runs rough as it leans out. I could be wrong but it sounds like it just shuts off as if someone turned the key off. My first instinct is pull ECU logs and see what's going on the moment it dies.

A31cefiroNZ Contributor

A31cefiroNZ

Posted
  • Author
Posted
3 minutes ago, joshuaho96 said:

It doesn't sound like fuel pressure slowly bleeding off. If you pull fuel pump there will be a moment where it runs rough as it leans out. I could be wrong but it sounds like it just shuts off as if someone turned the key off. My first instinct is pull ECU logs and see what's going on the moment it dies.

Yeah most definitely just shuts off exactly like that, yeah I'd most definitely do that but don't have a consult adapter....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • dbm7
      R34 Skyline climate control unit transistor

      By dbm7 · Posted

      That's not a transistor --- it's marked ZD1 which makes it a zener diode. As to what the breakdown voltage is, not enough there to divine.
    • bilbo117
      R34 GTR Seats / No longer reclining

      By bilbo117 · Posted

      Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • joshuaho96
      Ethanol Content Sensor - Always at 11%?

      By joshuaho96 · Posted

      The incentives are mostly the same, yes. Ethanol is cheap compared to the cost of doing 98-100 RON with crude oil alone. 87 to 93-94 AKI all with E10. In 2020 Canada mandated E10 as a part of their "renewable fuel standard" and is supposedly going to go to E15 in 2030. In California where there are only 8 refineries with two threatening to shut down next year it's been over 20 years now of E10 and 91 AKI maximum because there's just not enough refinery capacity or crude oil supply relative to the demand for premium unleaded fuel. And CARB's low carbon fuel standard means functionally none of the diesel available at the pump is made from crude oil anymore. It's almost all entirely 20% biodiesel blended with 80% renewable diesel (hydrotreated vegetable oil) now. The number of gasoline vehicles that support E15 or higher ethanol concentrations is surprisingly low, I can't imagine it being wise to play tricks like this without flex fuel sensors in most of the fleet.
    • GTSBoy
      R34 Skyline climate control unit transistor

      By GTSBoy · Posted

      It's almost certainly the same as the one next to it. Have a fish around amongst these hits https://www.google.com/search?q=surface+mount+transistor+m33&sca_esv=9cb49794e0b2005d&source=hp&ei=2vJ5aNjTB7Kw0PEPldnS8QM&iflsig=AOw8s4IAAAAAaHoA6qkfmF6XcygtrZ4Vu9f92NXF_RFd&ved=0ahUKEwjYqIPP7MWOAxUyGDQIHZWsND4Q4dUDCA8&uact=5&oq=surface+mount+transistor+m33&gs_lp=Egdnd3Mtd2l6IhxzdXJmYWNlIG1vdW50IHRyYW5zaXN0b3IgbTMzMgUQIRigATIFECEYoAEyBRAhGKABMgUQIRigAUjKCFAAWABwAHgAkAEAmAHfAaAB3wGqAQMyLTG4AQPIAQD4AQL4AQGYAgGgAuYBmAMAkgcDMi0xoAfMBLIHAzItMbgH5gHCBwMyLTHIBwU&sclient=gws-wiz
    • GTSBoy
      Blue slip

      By GTSBoy · Posted

      South Australia, which is hardly as far behind as the rest pf Oz makes out, and who is also not a paragon of progressiveness (read that as over-legislation) in the area of vehicle standards, has this to say on the subject: Adjustable coil-over suspension Aftermarket adjustable coil-over suspension components are suspension units that incorporate an external thread on the main body and corresponding threaded spring saddle that allows the vehicle's suspension height to be varied. If fitting aftermarket or coil-over suspension components you must submit an Application to modify a light motor vehicle form and a report from a light vehicle engineering signatory (LVES).
×
×
  • Create New...