Jump to content
SAU Community

Recommended Posts

Hi all,

Has anyone ever seen replacement panels for the rear seats in an R34 2-door? To comply with local laws I must remove the rear seats to keep the front buckets, this is the same as Japan but now I face the task every year as opposed to two years. Seeing as the rear seats never get used anyway, I'm thinking some sort of carpet-covered deck and panel to cover the bottom and upright portions of the rear seat area would be a visually pleasing addition and serves as somewhere to put my bag - that plus it would work well with a half cage if I persist to use the car on track.  

Something like what can be seen here in this F82. 

Seems easy enough to make, but if I can buy something it would save me the time (which I don't have much of at the moment). 

debc42a4-421f-4df2-ab6a-fde2481f3438-3528632716.jpg

Edited by GoHashiriya
grammar

There's full CF liners, but I've never seen anything less ridiculous than that.

It only needs to be carpet. This is what motor trimmers are for. If I wanted it to look neat & didn't trust myself to cut and shape the carpet right, I'd just give it to a trimmer for an afternoon.

Edited by GTSBoy

Cheers, tbh I didn’t even know this was a business. I’m guessing a seat upholstery company or similar is where I need to go. I just want something I can put stuff on, like backpacks and dildos, that won’t fall down into the gaps and crevices. A few hundred USD is as far as I’m willing to go. I also don’t want it to be made from wood for weight purposes. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...