Jump to content
SAU Community

Recommended Posts

FOR SALE

I have for sale a set of Front (drivers-side and passenger-side) brake calipers and rotors. These came off my personal R33 GTST. These worked perfectly and will come with all associated hardware including:

1. Genuine Nissan R33 GTST Sumitomo Front Calipers (Drivers-Side and Passenger-Side)

2. DBA 4000 Series (T3) Front Rotors (Drivers-Side and Passenger-Side)

These rotors have done approximately 8000kms. They are almost like brand new.

3.  2 x sets of brake pads including:

-  1 x set of Bendix SRT pads with more than half pad left (for driver and passenger side fronts) these are still in the caliper.

- 1 x set of Dixcel S-Type pads with almost the full pad left (for driver and passenger fronts)

4. Complete set of Caliper mounting bolts, Brake lines and associated brackets.

The reason for sale is that I upgraded to Brembo Calipers and bigger rotors.

PRICE: $700 for the lot.

I am open to all reasonable offers. If shipping is needed, I can arrange at buyers expense.

20240712_132324.jpg

20240712_132408.jpg

20240712_133415.jpg

20240712_133458.jpg

20240712_133729.jpg

20240712_133803.jpg

20240712_133852.jpg

20240712_133916.jpg

20240712_134012.jpg

20240712_134948.jpg

20240712_134953.jpg

20240712_135022.jpg

20240712_135110.jpg

20240712_135207.jpg

20240712_135218.jpg

20240712_135223.jpg

20240712_135240.jpg

20240712_135250.jpg

20240712_135314.jpg

20240712_135324.jpg

20240712_135348.jpg

20240712_135443.jpg

20240712_135500.jpg

20240712_135505.jpg

Link to comment
https://www.sau.com.au/forums/topic/485632-r33-gtst-front-calipers-rotors/
Share on other sites

  • 2 months later...
  • 1 month later...

You may want to list it up for a little higher - This price is much lower than you may realize. Here you're pretty much selling to people who most likely already have these things on their own rigs. S chassis people eat this stuff up like you'd not believe.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
×
×
  • Create New...