Rb25det s1 igniter pin out

[EndZee]

Hello, im asking about this guy - coil igniter on rb25det series 1 r33 s1 engine. I need to know if pins on coil side indicate coils itself from 1-6 or it’s firing order so pin nr1 goes to 1st fired spark plug:(1pin-1firing spark, 2pin-5order firing spark, 3-3, 4-6, 5-2, 6-4…)

 

photo: https://files.fm/f/k9pdug38uq

[GTSBoy]

It's definitely not firing order.

But I think it should also be made clear that the output that gets fired is the one that corresponds to the input that was switched at the ECU. So you could scramble them up totally so that the numbers meant nothing, and so long as you had the inputs and outputs matched up, you'd be fine.

The reason I make that point is that blanket statements about what it is supposed to be don't always hold out in a world where there's been 30 years for the wiring to have been stuffed with.

[EndZee]

Yeah I checked with multimeter and i1=e1… i4= blank, i5= e4, i6=e5, i7=e6. Nothing has been changed in ECU. It’s full oem. I did get conversion to Ngk vw/Audi coil packs. Guy made harness for me but cables was so similar in length so I could miss match something. So I’m asking if I should connect e1 to be 1 coil … e6 to coil nr 6. Just to don’t fck it up 

[GTSBoy]

Sorry, I thought "It's definitely not firing order." would be clear enough to say that it is definitely coil #.