Jump to content
SAU Community

R32 RB25DE - converting to RB25DET

MR R32

By MR R32,
in Engines & Forced Induction

 Share

Recommended Posts

MR R32 Experienced

MR R32

Posted
Posted

Hi Guys,

I am looking at buying an R32 with an RB25DET. I would like to take the engine out and swap it with an RB25DET for obvious reasons.

I have been told that the brakes are the same on the 1993 R32 RB25DE as the R32 RB20DET, and that only the engine, gearbox will need to be changed.

Can anybody please offer me some information, or advice ASAP as I am looking to buy tomorrow or the next.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/48924-r32-rb25de-converting-to-rb25det/
Share on other sites
Pva_Glue Grand Master

Pva_Glue

Posted
Posted
Hi Guys,

I am looking at buying an R32 with an RB25DET. I would like to take the engine out and swap it with an RB25DET for obvious reasons.

I have been told that the brakes are the same on the 1993 R32 RB25DE as the R32 RB20DET, and that only the engine, gearbox will need to be changed.

Can anybody please offer me some information, or advice ASAP as I am looking to buy tomorrow or the next.

Thanks

ok let me get this right, I am sure its typo, so you want to buy a R32 with RB25DET then you want to take RB25DET out and replace with RB25DET... for obvious reasons... :confused: reason would be different engine but same spec?

probably need to change Breaks..... suspension if you have the money, get some new Intercoolers, new engine management ECU...etc.

good luck

MR R32 Experienced

MR R32

Posted
  • Author
Posted

Sorry - it was a typo.

It currently has a non turbo 2.5L engine and I would like to replace it with an RB25DET.

The car is a 1993 model and the owner claims that this model has the same brakes as the R32 with a RB20DET which means brakes would not need to be changed.

  • 2 weeks later...
geordie Proficient

geordie

Posted
Posted

Thats wrong, brakes are N/A spec, single pot calipers, smaller rotors and a 4 stud hub. So unless the car has been upgraded then the brakes are no different to other N/A skylines. The diff is also different, turbo's came with LSD. Un sure to suspension specs but i am going to asume that the spring etc aren't the same as a turbo spec vehicle. Could be wrong, the weight difference in the models would be fairly similar (1380kg for mine, which is the GTS25) Apparently the intake manifold on the R32 Rb25de is the same as the Rb20det...

Basicly, look at the caliper, the 4pot models are larger and have nissan written on them.

Hope this helped.....

predator Grand Master

predator

Posted
Posted

geordie is incorrect.. some non turbos also come with LSD.. and also the same brakes as the turbo. Factory options can mix and match to give anything.

The brakes are probably the same as the rb20det in the latter models on the rb25de's. So you are correct mr r32 in that you'll just have to change the engine.. and the gearbox would probably be recommended but non mandatory to start(the rb20det gearbox will fit behind an rb25det)

RaseR Collaborator

RaseR

Posted
Posted

predator, you are wrong - my '92 R32 GTS-t, and nearly every other one I've ever seen have had 4 piston brake calipers as standard, not 2....

The caliper I am referring to has the silver NISSAN logo on the front, Sumitomo stamped onto the body, and are the same as used on the Z32 300ZX and the S14 200SX.

  • 3 years later...
BigC1988 Enthusiast

BigC1988

Posted
Posted

I just got my RB25DET (series 2) and I was hoping you could help me with some questions.

My Skyline is non turbo so it will be a big step with the RB25.

Now then, my first question is about the gearbox mounts, I hear they aren't the same and I will also have problems with the speedo meter. What do you know about this? Can I use the Xmember of the R33 ??

The second is about the harness, everyone that has ever swapped an engine told me that the harness is the most difficult part of the swap. Do you have the diagram of the R32 and the R33 (still can't find it for the R32) and some pointers on how this is done??

Hope to get a reply from you soon

Carlos Rudolph

GTS4WD Grand Master

GTS4WD

Posted
Posted

Yes.. speedo is out of wack..

Its one of the gears in the Gauge cluster.. they used to make cogs to change it to the correct speed.. but these days they are very hard to find..

Your speedo will read over.

There are a few R33 gearbox into R32 threads floating around.. have a look. Off the top of my head it is ia straight fit.

In terms of harness.. there isnt really a hard part.. just swap them over.. as you need to run a 33 ECU anyways..

Best advice I can give you.. look for an R32 and R33 workshop manual for the wiring diagrams..

I have seen a fair few Rb25 into R32 threads in the DIY section of this forum..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Driveline vibration is resolved. I ended up loosening all my engine mount and trans mount bolts, giving it a good shake then retightening everything and it's gone... Let's just say I was surprised that fixed it.  I've been happily driving it around again but unfortunately put zero time into my direct port/constant pressure WMI setup. I'm on vacation next week, so I'll try and finalize it then.  On a different note, I spent all week fuel/ignition mapping 2x 216L V16 engines. Turbo's were burning glycol and we swapped them out for larger units. We also had planned emissions testing on site, so I figured I'd be there the same week to use their instrumentation and massage any emissions issues out if needed. This was a first for me. Fuel management is similar in certain ways to automotive (i.e air density as load variable) but very different in others. It's all PLC based and AFR's are controlled by air and not fuel. They use a control valve between the turbo and air manifold to control pressure which in turn controls AFR's. Due to this, target AFR tables supplied by the OEM are in pressures and not mass which really through me off. They use air pressure vs fuel pressure tables. I also relied on an O2 concentration sensor the emissions team had in the exhaust. Ignition timing was also all over the place and we were losing a fair bit of power. They're now happily sitting at 16-40BTDC depending on load. We were making about 1600kw at 900rpm at 90% load. Engines were running a lot smoother as well.    
    • Duncan
      1992 R32 GT-R Race Car

      By Duncan · Posted

      heh, aint no R32 ever meeting modern targa cage rules unless the driver is veeeery short OP, good luck with the sale, since its already in the land of freedom I'm sure you will find a good buyer.
    • Duncan
      Oil pan for RB25DET NEO Stagea "version"

      By Duncan · Posted

      meh, it was a good video, clear about the issue and how he dealt with it. A bit heavy on the RTV and very brave to put an RB in anything without rebuilding it first, but otherwise I thought it was good Dose, I'm not sure that having the pickup forward is a big issue; yes of course the oil could shift under brakes but the sump should never be empty enough for that to be a problem (unless you also have a higher volume oil pump, and that oil can't return from the head to the sump quickly enough)
    • MBS206
      Starting again

      By MBS206 · Posted

      I can donate $100 to your upgrade fund. So long as you can donate the IC7 my way....
    • MBS206
      Starting again

      By MBS206 · Posted

      I'd love a Haltech ECU, and Haltech 10 dash. Was having a chat with Rob and Andy @ Haltech when Rob put one in his MR2. First one I'm kind of interested in too, as you can dim it RIGHT down. Andy was saying bright dashes is one of his peeves too!
×
×
  • Create New...