Jump to content
SAU Community

Recommended Posts

My GTR is missing at about 4,500-5,000rpms pretty badly so bad infact that I lift off straight away when it happens . Pulled plugs out they were NGK BCPR6EY 11

(11 meaning 1.1m gap) . I thaught this was the problem so replaced with a new set of the same plug but gapped at 0.8m but still has the same missing problem.

I've also tried disconnecting a coil pack at a time while the car is running to see if the idle didn't change when one of them was disconnected but as each one was unplugged the idle dropped they seemed to be all ok.

The car is fitted with z32 air flow meters , do these have problems like the standered units would it be worth my while to take them out and clean them with contact cleaner ?.

Car is going to the mechanic next week but just interested to know what else could be causing my problem?. The car has a few bolt on mods including 2530's , PFC , z32 airflow meters like stated .

Link to comment
https://www.sau.com.au/forums/topic/49759-miss-firing-r32-gtr/
Share on other sites

Guest two.06l
My GTR is missing at about 4,500-5,000rpms pretty badly so bad infact that I lift off straight away when it happens . Pulled plugs out they were NGK BCPR6EY 11

(11 meaning 1.1m gap) . I thaught this was the problem so replaced with a new set of the same plug but gapped at 0.8m but still has the same missing problem.

I've also tried disconnecting a coil pack at a time while the car is running to see if the idle didn't change when one of them was disconnected but as each one was unplugged the idle dropped they seemed to be all ok.

The car is fitted with z32 air flow meters , do these have problems like the standered units would it be worth my while to take them out and clean them with contact cleaner ?.

Car is going to the mechanic next week but just interested to know what else could be causing my problem?. The car has a few bolt on mods including 2530's , PFC , z32 airflow meters like stated .

question:hows your fuel supply???

it could be the coil packs , they break down under load and more so when they are hot .

does it always do it ? only when its hot ?

other than that check to see if your injectors are maxing out , it could be them or fuel pump .

I have the same problem. Only happens when hot.

Does your car hard start when warm? Mine does, and the misfiring is only under load, getting worse when hot.

Because it hard starts when hot, only misfires under load (I have new plugs @ .8mm), I am going to try new coils - next weekend. Will let you know how I go.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • 3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
    • Probably gonna remove manifold and turbo. I’m not sure if I can get M12 x 1.5 air tight. Could use high temp Loctite 246 or something similar, but I don’t know. Maybe it’s just best to remove everything again and weld an 1/8NPT on there instead.
×
×
  • Create New...