Jump to content
SAU Community

Recommended Posts

In want to install a stainless or alloy mesh grille for my FMIC to prevent stone damage.

would this really be worth it? ive been thinking about this question for a while my thinking may be way out and I am probably wrong but would you really need some type of mesh to protect your FMIC wouldnt the positioning of the wheels basically not allow stones to enter through the front?

Originally posted by akeenan

 

would this really be worth it? ive been thinking about this question for a while my thinking may be way out and I am probably wrong but would you really need some type of mesh to protect your FMIC wouldnt the positioning of the wheels basically not allow stones to enter through the front?

Well there are a lot of cars with stone chips on the front.

I also see a lot of coolers with bent fins etc. so I just want to prevent that... purely cosmetic.

T.

Originally posted by skyzerr33

you know that the mesh will reduce airflow over the incooler by about 20%.

just go to any bodykit shop they should be able to do it for u.

20%...maybe, but it really depands what sort of mesh you get; get the mesh with 15x10 (mm) at least..

BTW, EVO6/7 have mesh in front of their cooler out of factory ..and it's 15x10

I have mesh in the front of my car and it has saved the intercooler heaps od times from stone and rock flicking up on to the car. it will save you in the long run! you can do this you self for about $100. I got my mesh from a window frame and glass shop! :)

I agree with nizmokid. Buy it from a non car related indutry and put it on yourself. i bought my mesh from a plumber for $5. Ask for offcuts that are just lying around in the way. Cost me more in metal primmer, black paint and sikaflex to stick it on.

I got mesh with real big holes so as not to disturb airflow. But if you get the regular mesh with smalls holes, I have seen this reduce perfomance before. Cause the holes in my mesh is so big they wouldn't protect well (better than nother). But I feel the front bar is a bit more finished off.

Attached is pic of my front bar.

I'll be putting mesh infront of the FMIC when I put it on. Stuff the stones, I'd rather loose a bit of cooling effect than damage the intercooler.

The problem with painting the mesh black (or any dark colour) is that the stone chips to the mesh really stand out.

I'm going to try and see what powder coating the mesh black will be like. See if it's a little bit more resistant to stone chips than just paint.

I've got a mate that can do powder coating for about $30 or so.

J

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
×
×
  • Create New...