Jump to content
SAU Community

Recommended Posts

  • 4 weeks later...

a mate of mine was pulled over and they said you cant drive a 33 on Ps. He didnt believe them so he called the cop station, or Vic Roads, or someone, and they said that its only the GTR that Ps cant drive. They removed his fine or warning or whatever, and never heard anything of it again.

.

i know that the tightness level of cops depends on the areas and their knowledge of the cars around them... but aybee.. thats really interesting, maybe the power/weight restrictions have changed since i last checked, or maybe vicroads have made a mistake somewhere?

Since R33 are imports, VicRoads may not have factory spec data for it, thus they may only refer to R32 GTR which were Australian delivered, with factory spec 206kw. Thus the power restriciton on GTR, but since R32/33/34 GTS-t were not officially imported by Nissan, they may not have that data and therefore those cars were not in their list. However doing the proper calculation based on factory spec, if all skylines were australian delivered then GTS-t could be included in the list (except perhaps R32 GTS-t, as the RB20DET factory spec has less power than RB25DET)

Since R33 are imports, VicRoads may not have factory spec data for it, thus they may only refer to R32 GTR which were Australian delivered, with factory spec 206kw. Thus the power restriciton on GTR, but since R32/33/34 GTS-t were not officially imported by Nissan, they may not have that data and therefore those cars were not in their list. However doing the proper calculation based on factory spec, if all skylines were australian delivered then GTS-t could be included in the list (except perhaps R32 GTS-t, as the RB20DET factory spec has less power than RB25DET)

that could be possible but it seems unlikely that the cops wouldnt be into this by now.

What im trying to understand is why they use power figures from the factory (at the flywheel) and not at the wheels? I understand that getting these kind of figures would be a problem but it seems like an inaccurate measure of the cars true power

you're thinking is right, power figure at the wheels is not as accurate as factory spec claim (although we know that Nissan may have 'detune' factory spec claim on GTR to make it look like didn't exceed 206kw gentlemen's agreement).

There's so many factor on dyno that can affect power at wheels, tyre size, ambient temp, worn clutches, etc. Each car even from the same make and model can show different figure on dyno, especially 2nd hand ones, and testing each car out there for every P-plater would be uneconomical, so just use the factory spec figure and calculate from there what is allowed/not allowed.

If you keep getting pulled over my advice to you is log it (write it all down) and make a complaint. I"m not sure who does police complaints in victoria.

I remember one of my friends bought a car from a drug dealer - he used to get pulled over by d's, undercover, highway, local - every cop car. After he found out who the car belonged to and complained to his dad (some richy rich conections guy) who made a complaint to the police and ombudsman (or whoever) and he never got pulled over again.

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Ok thanks..that was my second question if i can somehow bypass this even with Nistune(that is all i have right now...aparat from stock ECU. So with some aftemarket it can by "bypassed" or make it work?  I know there is Link or Haltech (mainly used). We have ECUmaster here so i will gather some info about it.
    • Yes. You will need to get the original boost sensor and wire it in. That is.... if you plan to use a stock ECU - even a Nistuned ECU. The Nissan ECU will not operate correctly without it connected. And yes, it will do annoying stuff like you are experiencing. You will almost certainly be better off with some aftermarket ECU, than trying to hunt down rare sensors.
    • Ok so ABS/TCS is "not" the problem. Yeah i know now about the ABS with Nistune(i told that to the Nistune guy) but iam not 100% why or why i dont have ABS. ABS cube is in the engine (always has been) but i had braked couple of times rly hard and brakes just locked and scream. Does all Skylines have ABS cube? That boost sensor https://www.sau.com.au/forums/topic/367633-wtb-r34-gtt-turbo-pressure-sensor-pics-inside/ Is this it? I need to ask but i have a picture of engine bay and i do not see that (100% is not in that place) If i do not have this the car can do what mine is?(cutting around 4000 rpm) Here is the pic of my engine bay(only one i have) BUT i think i dont have that cuz loom was used from my RB20DE NEO and i know (obviously) that it does not have boost control or any wire to that...) so maybe that is the problem? (i dont know for 100% if that car where the engine is from had that)...but i dont have the loom from that
    • I'm with you here. It's either loom has an issue, OR, injectors are not functioning properly. It could even be they're just constantly dribbling, hence the wet, but not firing.
    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
×
×
  • Create New...