Jump to content
SAU Community

Recommended Posts

hey all,

I am the proud owner of a fresh off teh boat cefiro with the RB20DET engine under the hood, it is my first time owning a turbo charged ride (past cars were silvia and supra both NA)... now this engine is almost completely stock apart from a 2.5" exhaust system.

What I want to know is what would be the most sensible upgrades to make on this engine to get a bit more punch.... I am not going to be able to fork out thousands in the near future so i am looking for the basic upgrades.

So air pod filter and ecu remap have been reccomended by one or two people, but I thought I would get a general concensus from the wider SAU population!

Let me know what you think.... If you have a resource online showing someones build up of an RB20 that would be tops too, i did google but didn't get too much success.

cheers all!

Luke

Link to comment
https://www.sau.com.au/forums/topic/50489-rb20det-modification-guidelines/
Share on other sites

if it has an exhaust already then do the following if ur on a budget. The prices are what you should expect but will differ depending on where u go and who does the work for you:

-POD ($80 inc adaptor from Autobarn or Repco... fit it yourself and keep the stock box.)

-Bleed Valve ($60-$90 and run about 13psi on it)

-ECU Remap ($250-$300 depending where ur located allow money for dyno tuning if required. This will need to be remapped everytime you add something performance wise to the car.)

-Get some secondhand wider tyres for the rear like 235s or 215s ($100max sometimes more for 17s.)

That alone will get u into the mid 14second range (manual right?) and if ur a good driver into the lowish 14s. (pretty much the exact setup as was on my R32 except the 32 had damper adjustable suspension and a HD exedy clutch.)

-Finish off the exhaust if not done already with a dump and front pipe ($250 to $300)

-Hi Flow Cat ($230)

-Then get a nice HD clutch of some sort ($700+)

-Suspension setup (Can get some decent height or damper adjustable second hand jobs for less than a grand. S13 stuff should bolt straight up)

Then i would suggest upgrading the brakes on it... best to upgrade the whole system to something like the R32 GTST or R33 GTST or even the Z32 300ZX brakes like whats on my ceffy.

cheers for the replies, Inark, handy stuff mate. but yes it is a stockers auto... so I know I am losing a bit with the auto but its a daily driver in sh*tty city traffic so its been suiting it well.... the tweaked power is for the weekend fun....

ok well the pod is a sure thing, has anyone got a recommendation of the type to buy for easy fitting to the stock airbox unit?

so can someone tell me a bit about what a bleed valve does and how it is fitted?

the suspension is done, I had it dropped on sports ryder equipment a few weeks ago...

cheers

luke

autos are fine man... at least they are consistant unlike us :P

PODs... just get the cheapie one i suggested... you remove the std box... easy enough... 4 clips to get the top off... remove the filter panel and undo the 4 10mm bolts which go into the chasis. also disconnect it from the pipe leading to the turbo via the 8mm hose clamp.

Shouldnt be too hard to figure out how to attach the adaptor plate to the pod and then to the pipe where the box was connected to.

bleed valve is a little more difficult.. i will put up my guide on how to do it when i get home... it has plenty of large pictures to guide u through. A bleed valve is whats used to change the amount of boost you are running by bleeding air.

forgot to add u will also need a boost guage... there is no shortage of 2nd hand cheapies going around on most of the performance forums so dont be a stranger to the For Sale section...

i also have an installation guide on them too :P but its for an R32... BUT is done the exact same way and on the same engine so its all good :)

How much would an average comprehensive car insurance quote be for an R32 GTS-T?(most likely under my parents name, not quoted on me when im 18)....Im interested to know as i am looking into getting one when i get my P's as a first car. If anyone can find out for me that would be great.

Thanks in advance. :(

So yeah back on topic...

What I have is stock, with nice exaust. Prob GTR fuel pump, nice big pod, a bit of 3inch pipe going from the front bar to right in front of it. Bleedvalve at 12-13psi, depending on the weather (found it was faster on this than 14psi, I guess because of effeciency) Malpassie, and, a catch can, which I personnally found no gain from.

Anyway, this got me 195rwhp. All the mods I found a dencet boost from, I think I have spent $300... But I did get stuff cheap, and a fair bit was already on the car.

And with the auto... You can spool on the line better, and potentally get a better launch. You want faster times on the strip, let the tyres down!

sorry mate i couldnt find it... i'll have to make another one... i thought i copied it over from the last format... guess i was wrong... ive lost everything from my website

R32 GODZILLA, just go with just car man... Third party property + fire and theift damage... all sweet... that way if you wrap it round a telegraph pole... tough s%#t, you'll know better next time.. lol! but yeah, i'll stop goin off topic now :rofl:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all, Long time since I've posted here. Looking for some advice on what I can remove to further identify the cause of my issues.  I can move the passenger seat forward and back but the knob used to adjust the seat angle is pretty much free spinning, there's very little resistance.  Removing the side cover I can see that the chain is intact but the shaft for the adjustment spins without the gear attached to it moving.  What's my next step for disassembly here? Is this a common fault? Just being a little cautious as I didn't want to start removing bolts for a spring to fly out or something equally as stupid.  Cheers
    • Those above shitboxes, mediocre and above usually have a turbo strapped to them, hence the slightly higher octane is required.  
    • Hi all,   long time listener, first time caller   i was wondering if anyone can help me identify a transistor on the climate control unit board that decided to fry itself   I've circled it in the attached photo   any help would be appreciated
    • I mean, I got two VASS engineers to refuse to cert my own coilovers stating those very laws. Appendix B makes it pretty clear what it considers 'Variable Suspension' to be. In my lived experience they can't certify something that isn't actually in the list as something that requires certification. In the VASS engineering checklist they have to complete (LS3/NCOP11) and sign on there is nothing there. All the references inside NCOP11 state that if it's variable by the driver that height needs to maintain 100mm while the car is in motion. It states the car is lowered lowering blocks and other types of things are acceptable. Dialling out a shock is about as 'user adjustable' as changing any other suspension component lol. I wanted to have it signed off to dissuade HWP and RWC testers to state the suspension is legal to avoid having this discussion with them. The real problem is that Police and RWC/Pink/Blue slip people will say it needs engineering, and the engineers will state it doesn't need engineering. It is hugely irritating when aforementioned people get all "i know the rules mate feck off" when they don't, and the actual engineers are pleasant as all hell and do know the rules. Cars failing RWC for things that aren't listed in the RWC requirements is another thing here entirely!
    • I don't. I mean, mine's not a GTR, but it is a 32 with a lot of GTR stuff on it. But regardless, I typically buy from local suppliers. Getting stuff from Japan is seldom worth the pain. Buying from RHDJapan usually ends up in the final total of your basket being about double what you thought it would be, after all the bullshit fees and such are added on.
×
×
  • Create New...