Jump to content
SAU Community

Outside Temperature Sensor?????

drifto

By drifto,
in General Maintenance

 Share

Recommended Posts

drifto Collaborator

drifto

Posted
Posted

Where is it located?

Can it be callibrated?

Mine seems to be about 4-5 degrees over all the time but it also gets some serious heatsoak from somewhere.

If the cars has been parked in the sun or even left in the garage after running then the outside temp reading can go into the 30's on a 10 degree day in Canberra! :flamed:

Link to comment
https://www.sau.com.au/forums/topic/50738-outside-temperature-sensor/
Share on other sites
Mr GTS4 Mentor

Mr GTS4

Posted
Posted

mine is actually on the front where the air con fan is. on the top side of that there is a black thing with wires coming to the middle under the latch that you can un plug. don't know if you can change it but you could move it from there.

  • 2 years later...
NathR32 Mentor

NathR32

Posted
Posted

So sorry to bring up an old thread but...

Ran an air conditioning diagnostic test and it comes up with a flashing 21. This means that the outside air temperature sensor is faulty or missing.

My ambient temperature is displayed as -30c.

I searched and searched on here but did not find a picture of said sensor. Many people have said it is located behind the front bar.

I found a plug with nothing connected to it, so one would assume this is the plug for this sensor. The sensor isn't there at all as far as I can see. It is a two pin plug, wire colours are light blue/white stripe and light green.

Does anyone know if this is the plug for the OAT sensor?

NathR32 Mentor

NathR32

Posted
Posted

Thanks so much for your help. The plug that I found was in the location that the picture shows. The plug in the picture looks very similar to the one in my car also. The sensor is nowhere to be found, so I assume someone took it out in the past sometime.

I'll ring Nissan tomorrow to see if I can get a replacement sensor.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      R32 GTST - 600KW+ RB28/CD009 Build

      By Dose Pipe Sutututu · Posted

      LOL.... a good amount of people (not all) on that continent seem to know everything and like to measure things in bananas, football fields, statue of liberties instead of the metric system lol.
    • dawhitehonky
      M35 Aftermarket Fuel Pump

      By dawhitehonky · Posted

      I assume the modules are similar enough, so if you've had no issues I don't see why I would. I have tried to find a wiring diagram for the FPCM / fuel pump circuit, but I can't find it anywhere. Otherwise, I would just do some wire cutting and joining at the FPCM and give the 12 V supplied to the FPCM directly to the pump instead. If you know anyone that could help with wiring diagrams, I'd be very happy  
    • GTSBoy
      M35 Aftermarket Fuel Pump

      By GTSBoy · Posted

      If it dies, then bypass. The task isn't difficult. I have one running on a standard R32 FPCM. That's after nearly 20 years of it running an 040, which pull substantially more current than the Walbro. They're not the same module, but I'd hope it indicates that the R33 one should be man enough for the job. I think people kill them when putting proper sized pumps on them, not these little toy pumps we're talking about here.
    • GTSBoy
      Rapid-fire squeaking/creaking from rear suspension

      By GTSBoy · Posted

      Silicone spray won't hurt anything. And if it does, that's an opportunity to put some solid steel spherical bushings in, so you can really learn what suspension noise sounds like, If you're going to try it, just spray one bush at a time, so you can work out which one is actually noisy. My best guess is that if the noise started only since putting the coilovers in, then it is just noise being transmitted up through the top mounts of the struts, and not necessarily "new" noise from bushes. But it's almost impossible to know.
    • GTSBoy
      Jacks that fit under GTR lips that can reach the subframe?

      By GTSBoy · Posted

      Are you saying the 34 is SUV height, and not that we're talking about an SUV here? (because if we're talking about an SUV, you don't fix them. You just replace them when something breaks. Not worth establishing sufficient emotional connection with an SUV to warrant doing any work on one). I wouldn't jack my car up on a short little loop of 10mm steel rod poking out through a hole in the bumper bar, front or rear end. I realise that we're probably not talking about that type of loop at the front, being the one under/behind the bar on a Skyline.... but even for that one, trying to jack up on what amounts to a thin piece of steel, designed purely for withstanding a horizontal tension force, not a vertical compressive force (and so would be prone to buckling/crushing) and, my most particular bitch about it - located RIGHT AT THE EXTREME FRONT OF THE CAR, applying a load up through the radiator support panel, etc, with almost the entire mass of the car cantilevered between there and the rear wheels? Nope. Not doing that. Not on the regular. That structure out there in front of the front crossmember is not designed to carry load in the vertical direction. Not really designed to carry any load at all, really. The chassis rail that the tow point is connected to would be fine loaded in tension, as per towing. Not intended to carry the mass of the whole car, especially loaded all on one rail, with twisting and all sorts of shitty load distribution going on. No, I will happily drive up on some pieces of wood, thanks. That can only happen on driven wheels, and they are at the other end of the car, and this problem does not exist at that end of the car. And even then, I have been known to drive up on at least 1x piece of 2x8 each side at the rear, simply to reduce the amount of jack pumping necessary to get the car up high enough for the jack stands. What really really shits me about Skylines is the lack of decent places for chassis stands at either end of the car. You'd think they'd be designed into the crossmembers.
×
×
  • Create New...