Jump to content
SAU Community

R34 Injector Upgrade

vlv00m

By vlv00m,
in Engines & Forced Induction

 Share

Recommended Posts

vlv00m Apprentice

vlv00m

Posted
Posted

I have just brought myself a GT35R turbo and now wanting big hp.

The problem is that I'm running the stock injectors and want to upgrade them.

Does anyone know what a cheaper injector upgrade would be for a RB25DET NEO.

Looking at about 550 cc Top Feed injectors.

Would the Rx7 injectors fit ?

Would Bosch 363 injectors fit ?

Any other good injectors ?

Thanks

Link to comment
https://www.sau.com.au/forums/topic/50739-r34-injector-upgrade/
Share on other sites
Sydneykid Grand Master

Sydneykid

Posted
Posted
R33 Fuel rail will only bolt up if you change your inlet runners...R33 are side feed, R34 are top feed...and vastly different.

Stick with the top feed, half the rpice and heaps more choices. But R34 GTT's have small holes in the inlet manifold to suite those skinny injectors. There are a few more brands making injectors for R34's now, shop around. :D

Sydneykid Grand Master

Sydneykid

Posted
Posted
RB20DET injectors also fit and go upto 720cc you just need to change the plug (simple soldering job)

Help me out here Ian, this is a picture of the three types of RB injectors. The one on the left is the R34 GTT injector style, the one in the middle is the R33 GTST injector style and the one on the right is the RB20/26 injector style.

RBInjectors.jpg

Is there a fitting kit you can buy that let's you fit the RB20/26 style of injector into an RB25 Neo? If so what brand, how much and where do you get it?

Weq Contributor

Weq

Posted
Posted

I dont know if this helps, but i know u can use RB20/26/RX7 injectors in Honda's with a resister pack. SO if the theory holds tru, u can can run injectors made for our cars. Ppl in the US like RC Engineering / Rodchester / Lucas / Bosch make upto 1000cc++ injectors which cost half the price as ur jap counterparts. We use em all the time with great results.

http://www.camp1320.com/parts/new/fuel.html

Has some low impedance (u need resister pack) to fit, but just google and u'll get plenty of dealers. I got some 4x440cc's for $300AUD.

Just to add, apparently WRX injectors can be made to fit quite easily, and there is a mod to allow double the flow capcity (a factory installed restrictor is removed).

http://forums.nasioc.com/forums/showpost.p...9&postcount=100

I have also heard bad things about RX7 injectors and spray patterns.

just something to think about, maybe a bit outside the square.

Sydneykid Grand Master

Sydneykid

Posted
Posted
I dont know if this helps, but i know u can use RB20/26/RX7 injectors in Honda's with a resister pack. SO if the theory holds tru, u can can run injectors made for our cars. Ppl in the US like RC Engineering / Rodchester / Lucas / Bosch make upto 1000cc++ injectors which cost half the price as ur jap counterparts. We use em all the time with great results.  

http://www.camp1320.com/parts/new/fuel.html

Has some low impedance (u need resister pack) to fit, but just google and u'll get plenty of dealers. I got some 4x440cc's for $300AUD.

Just to add, apparently WRX injectors can be made to fit quite easily, and there is a mod to allow double the flow capcity (a factory installed restrictor is removed).

http://forums.nasioc.com/forums/showpost.p...9&postcount=100

I have also heard bad things about RX7 injectors and spray patterns.  

just something to think about, maybe a bit outside the square.

You are right weq, for RB20/26 there is no Problem with using Rockester, Bosch, Jecs, Nippon Denso etc The top feed standard is readily available. Hondas run the top feed standard so they are interchangeable. But I haven't been able to find any of the large OE injector manufacturers making the skinny R34 GTT (RB25DET NEO) style. So you have to buy the expensive Japanese brand names.

As for RX7 injector spray pattern, I heard that story years ago. So I tested them and they look pretty good to me, sure I have seen better (Bosch Motorsport for one), but I have seen plenty that are worse. Most of it comes from the fact the Series V turbo injectors are getting old now, and you have to buy 8 or 9 to get 6 good ones. But that's nothing unusual for used injectors.

Hope that clarifies :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      Lol a few are like that with no intention of being reborn unfortunately. 
    • Dose Pipe Sutututu
      Mistakes were made, my R34 Story

      By Dose Pipe Sutututu · Posted

      Done, I'll do mine soon too - whenver I take out the car next. I can cheat and make it quieter by turning off VCT at idle too - but I lose the braps
    • 25RBGT
      Got this r31 silhouette flood car to rebuild.

      By 25RBGT · Posted

      All trim back in wired running driving. Few things to follow up on but not far off the return to the road. att.6HN4wP38LTIOISkhA8eACoBFqzfgQMahZPLA8ut0pqE.mp4 att.w2q0ux2PGuqgQTj2Os13cNHQtqcSEcCAhD_CAXy_IQM.mp4
    • GTSBoy
      Mistakes were made, my R34 Story

      By GTSBoy · Posted

      The trouble with phone apps is that they really do not know the sensitivity of the mic on each specific phone, whether there is some sort of cover or skin that can change that, etc etc. So the readings off them are not calibrated. You certainly couldn't be sure that you were even within 3 dB. I have the same app on two (actually more than that) different phones/tablets and the readings in the same room at the same time are never the same. I don't mind the apps - they are as useful as a dyno - if you're testing for delta from thing1 to thing2. But not to try to generate some sort of absolute value.
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      I'm gonna use the "Sound Meter" app from the Google Play Store and as close as I can bother to these procedures: 4. TEST METHOD FOR ALL VEHICLES EXCEPT PRE ADR83 IN-SERVICE GOODS VEHICLES AND OMNIBUSES 4.1 Microphone position 4.1.1 The microphone shall be directed towards the orifice of the exhaust outlet and shall be supported by a tripod or similar device not providing excessive acoustic reflection. The general requirements for positioning microphones are shown in the Appendix. 4.1.2 The nominal axis of maximum sensitivity of the microphone shall be substantially parallel to the test site surface and shall make an angle of 45 degrees ±10 degrees with the principal direction of gas flow from the exhaust. 4.1.3 In selecting the 45 degree alignment from the outlet of a motor vehicle fitted with two or more outlets, only the angle resulting in the microphone being farthest from any other outlet must be used. National Stationary Exhaust Noise Test Procedures for In-Service Motor Vehicles Page 3 4.1.4 The height of the microphone above the test site surface shall be equal to that of the orifice of the exhaust outlet ±25mm but shall not be less than 200mm above the test site surface. 4.1.5 The distance of the microphone from the exhaust outlet orifice shall be 500mm±25mm. 4.1.6 [Relates to vertical exhaust outlets] 4.1.7 For vehicles fitted with one exhaust outlet the microphone shall be placed so that the greatest possible distance is achieved between it and the vehicle. 4.1.8 [Relates to multi exhaust outlets] 4.1.9 [Relates to multi exhaust outlets] TLDR: 200mm off ground 45 degree angle relative to exhaust flow 500mm from tailpipe exit. (I probably won't use a tripod) Here's a photo, cause I read the instructions wrong myself.
×
×
  • Create New...