Jump to content
SAU Community

Recommended Posts

Hi all,

Just a few problems which are bugging me...i hope someone can help me out ;)

QUESTION 1:

I have a R33 Series 2 Gts-t with auto transmission.

I was fiddling around with the radio the other day trying to install a new Mp3 unit. After i was all done, the radio wouldnt turn on! The red dot that blinks when the engine is off still blinks but the unit itself wont work even after starting the engine. Furthermore, the clock also doesnt work! :)

Thinking i had blown a fuse, i opened the fusebox next to the steering column and there were three blown fuses.

I havent replaced these blown fuses yet but i was wondering how many more fuseboxes there are in my car... some threads mentioned a passenger footwell fusebox, an engine fusebox, and a rear boot fusebox as well...???

Do all of these boxes exist? Where?

QUESTION 2:

How the hell do i turn off that annoying reverse beeper?!!?!?

Is there a simple wire i can cut or do i have to remove the whole dash to rip the damn thing out?

QUESTION 3:

When my car is idling and when under mild/little throttle, the boost gauge is sitting on the negative areas? What does this mean? Is this normal? Im just confused because negative would mean are is being pushed OUT rather than INTO the engine...

Im a n00b so be nice :D

Cheers~!

Q1 - fuse boxes are located in the boot, under steering wheel and under the bonnet.

Q2 - yeah that noise pisses me off too....if anyone knows how to disable it let me know too!

Q3 - The boost guage is displaying 'negative' (vacuum pressure) on idle because there is no boost being created. This is normal.

Hi all,  

Just a few problems which are bugging me...i hope someone can help me out ;)

QUESTION 1:

I have a R33 Series 2 Gts-t with auto transmission.

I was fiddling around with the radio the other day trying to install a new Mp3 unit. After i was all done, the radio wouldnt turn on! The red dot that blinks when the engine is off still blinks but the unit itself wont work even after starting the engine. Furthermore, the clock also doesnt work! :)

Thinking i had blown a fuse, i opened the fusebox next to the steering column and there were three blown fuses.

I havent replaced these blown fuses yet but i was wondering how many more fuseboxes there are in my car... some threads mentioned a passenger footwell fusebox, an engine fusebox,  and a rear boot fusebox as well...???

Do all of these boxes exist? Where?

QUESTION 2:

How the hell do i turn off that annoying reverse beeper?!!?!?

Is there a simple wire i can cut or do i have to remove the whole dash to rip the damn thing out?

QUESTION 3:

When my car is idling and when under mild/little throttle,  the boost gauge is sitting on the negative areas? What does this mean? Is this normal? Im just confused because negative would mean are is being pushed OUT rather than INTO the engine...

Im a n00b so be nice :D

Cheers~!

  • 6 years later...

been searching ever were.. thought id ask here..

ive just installed a hks front mount side flowing intercooler... something like 400 wide and so on.. car runs great.. alot beta.. but just wondering.

When you installed a larger cooler and more piping.. does this make my vacuum boost lower on my boost guage?.. ive noticed its like 1.5 to 3 psi lower than it was before... wish i wrote it down from stock.. but i never new... thanx for anyone that can clear this up.. replaced all boost lines and all while i was doing this.. maby a older line was causeing higher vacuum ? thanx oh one other thing.. ive noticed my boost go up be like 1 psi or 0.5psi... but im gussing a larger cooler would do that?.. thanx

Edited by seriesII

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So these external kits with the machined block for remote solenoid mount will only work on a NEO head and RB30 or RB26 bottom end   For an R33 head on a 26 bottom end the remote vct kit is to resolve RB26 manifold adaptor plates etc  IF you try to use the remote VCT on an RB30 or RB26 bottom end with an R33 head then  you can starve the cam journal??? I have one of these kits from bits I had years ago before plans changed  I don't understand how that tracks with this video   https://youtu.be/RuPiI22Mplk?feature=shared   This looks like I can run the v termite vct kit to feed the VCT on an R33 head on an RB26 bottom end?!?!?   Lol.... don't v have these problems on RB20s
    • Yeah i know that MAF is no no for this type of BoV. The engine has no BoV and "hose/pipes" ..it was all deleted (or probably it was not even on the engine when it was bought  ) It does that "sutututu" noise which i kinda do not want(atmospheric is better IMO...but standalone ECU)  What are the cons of running without blow off on stock RB25DET NEO. It running 5-7 PSI max (it has boost controller)   EDIT: and can Nistune be "tuned" to know there is no BoV to i dont know "know" and be better for a car? I read so many info about no BoV. One guy saying it is bad and hurting the turbo/engine/car and other that it does not...  
    • Yeah. OK. I'll say the same thing I say to everyone. You do not have to use 100% throttle all the time.
    • Mainly being afraid of breaking something on something i've poured so much money into haha
×
×
  • Create New...