Jump to content
SAU Community

Recommended Posts

Iputs more torque to front wheels, not sure of %age, but more than 50

Can't be more than 50%, ATTESSA hydraulic pump locks up the clucthes to the front wheels, rear wheels are always solidly connected. So at max pressure best is 50/50.

What does the centre diff button do next to the steering wheel?

Try it on wet grass. When turned off Stagea spins rear wheels for a bit and then feeds some torque to the front wheels and drives off. When turned on, it just drives off straight away, no waiting.

Very handy as the rear doesn't step out in the snow and ice. Not much use to me, no snow and ice in Sydney. Could be handy in the pits with the trailer on the back when it's wet though. The old Foulcan used to sit there spinning it's one rear wheel. Had to get towed to the sealed pit road once at Bathurst, very embarassing.

Just one more reason for choosing a Stagea :D

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012070
Share on other sites

Hahahaha, good one SK, I can see it now, the old Foulcan smoking up one tyre in the pits and everyone looking thinking 'What the hell is he doing !!'...

Anyway, I just found this out last night as I was reading through heaps of Jap stuff on Stagea's.

With the button pressed in, the torque is 50/50 up to 20km/h. After 20km/h it sits at 80/20 (80% rear and 20% front) unless the front requires more, then it can vary up to 50/50.

Very interesting hay... You can see they were designed mainly for snow use (and would be great for pulling a boat out of the water at the boat ramp), and probably explains why you don't feel a big difference when driving normally with the button in.

J

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012334
Share on other sites

jay do you know the addresses of the japanese sites you were looking at?

i searched google japan and yahoo japan and all the sites i keep finding are all the same stuff just the specs some pics of the guy/girls cars and mods etc...

looking for more interesting stuff like what you just posted

:D

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012409
Share on other sites

jay do you know the addresses of the japanese sites you were looking at?

I actually got the link from Rezz's post on the thread you started :D The first link, but it was in a link in that link - if that makes sense !!!

Here's the first link;

http://homepage2.nifty.com/WGNC34/tuningdatetop.htm

You have to click on 'INDEX' for it to bring down a list of other links.

That particular info is the third link down in that link :) - here's the link;

http://homepage2.nifty.com/WGNC34/tuningdouryoku.htm

To read it you have to put it into a translator (bablefish won't work for some reason....). I use this translator http://www.systransoft.com/ after a while you have to register, but it's free.

Then in some sort of Japglish you can make this out at the bottom of the page;

"You handle for the reference and there is this kind of statement in the instruction manual.

At the time (usually time) of synchronizer mode OFF basis: 0: 100 MAX50: Variable control up to 50

At the time of synchronizer mode ON below (when departing) vehicle speed 20 km... 50: 50 fixing

Above (when travelling) vehicle speed 20 km... basis 20: 80 MAX50: Variable control up to 50."

J

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012661
Share on other sites

good stuff jay thanks for the info

am trying to get my stagea site uploaded in the next couple of days

yeah babelfish is crappy i will try the systransoft program and see how i go :D

prank

good idea can you start one and maybe put the dash removal tutorial that shan posted a while back in there and sticky it??

:)

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012693
Share on other sites

so this is a good feature to have when chopping holden utes at the traffic lights in the rain?

:);) ;)

Mate he was soooooo far behind, I leasurely changed lanes and drove along at the speed limit. Still took him a K or so to catch up. Subaru Forresters are also fun, they keep looking in the rear view mirror wondering why this strange waggon is keeping up. KEEPING UP, huh I was looking for room to go around. And then there was 4 guys in 2 WRX's that got whiplash when I went in between them in a roll on at the lights.

I have been having so much fun. :D

Link to comment
https://www.sau.com.au/forums/topic/51047-the-button/#findComment-1012695
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Just trying to get my head around this. At 5psi of boost, you turn on your wmi pump, and then you're using a 3000cc injector, to allow flow upto the actual engine, where you have your 6x200cc injectors and a 500cc injector. If the above is correct, what advantage are you obtaining by having the 3000cc injector blocking flow, is this just incase a line breaks between that injector and the motor you can stop flow immediately? Or are the 6x200cc and 500cc less injectors and just spray nozzle?
    • Welcome! New member myself, but I had an R33 back in 2002. Best advice I could give, based on my experience: if you're running the factory turbo, be very conservative with boost. I made the mistake of just fiddling around with the boost controller and cranking the boost for fun, and the end result was my intake pipes popping off frequently from the constant deluge of oil that was being blown into the recirc by the stressed-out turbo, which itself was siphoning oil from the engine and farting it out both sides of its centre bearing (or something to that effect). If I could do it all again, I would have gotten a new turbo and had a tune dialled in professionally and then just left it alone! Funny you mention the metal shavings in the gearbox, as I had the same thing - the probe plug (magnetic drain plug, essentially) would come out caked with shavings. At least it was doing its job. Not sure if that's just sacrificial wear and part of the deal, or if my gearbox was shagged, but I wasn't abusing it. Enjoy the R33 - they're a dying breed, and if they weren't $35k+ on CarSales in Queensland, I might have picked up one of those again, instead of the 370GT I own now (though I'm loving the 370GT, that big 3.7L V6 just hits different).
    • Howdy folks. I owned an R33 back in 2002, which was thoroughly beyond my capacity (financially speaking) to maintain/insure, so we parted ways in 2004. Fast forward 21 years (to literally yesterday, in fact) and I'm now the proud owner of a 2007 V36 370GT. I'm happily surprised by how much power the VQ37VHR makes, compared to the RB25DET, considering the latter is turbocharged. I had planned to add a turbo at some point but I'm on the fence about whether I'll even need it (though I do love the sudden onset of extra torque). Any other 370GT owners around the traps, I'd love to hear about your experiences with this car (good and bad).
    • Perhaps the answer is... more jacks!* *proper jacks must be used.  
    • I NEVER think about using a scissor jack unless there is absolutely no other alternative. f**king things are dangerous, annoying and stupid.
×
×
  • Create New...