Jump to content
SAU Community

Recommended Posts

Just called the workshop that is doing compliance for my '95 R33 GTS25-t. They said they finished with the car and mailed the paper work few days ago to Canberra, but they don’t know how long it will take for the plate to arrive. So maybe someone got their plate recently or knows aprox. how long it takes for one for arrive, please let me know as i would like to have a rough idea when to expect it.

Thanx

Link to comment
https://www.sau.com.au/forums/topic/51155-how-long-for-a-compliance-plate/
Share on other sites

My car also became ready - last week, the paperwork was submitted over the web, the current time for it to get cleared is 5 working days, however it fluctuates a fair bit (up to 14 etc). Anyhow yesterday i got a phonecall from the compliance workshop, the government asked about the mirrors or some such crap, took about 2 seconds to alter the form to answer their question but now its another 5 day wait. (Why they dont actually pick up the phone when they have questions is beyond me)

So i guess the answer to your question is about 6 days. (Once the car gets the all clear it takes another day for the compliance plate to arrive).

Hope that helps and you dont get stuffed around like i did

Well it took my mates workshop (they worked non stop on the car) 2 days to do.

4 Side Intrusion bars

5 Seat belts

Mirror from convex to flat

Child restraint points

Unleaded fuel filler opening restrictor

and fit a headunit and 4 new speakers

and then the engineer checked it all over for me and fitted me with a L01 mod plate for registration (QLD).

Mine took approximately 2 weeks for my R33. Its systematic, but I know how you feel, i was in pain just looking at my car sitting in the workshop, and couldnt even take it out. While mine was sitting at the workshop waiting for the plate to come back, I installed my stereo and got an alarm system fitted. Could be an idea to get an alarm fitted so you can park your car when you get it...

In the end, the wait is all worth it.

Mine took approximately 2 weeks for my R33. Its systematic, but I know how you feel, i was in pain just looking at my car sitting in the workshop, and couldnt even take it out. While mine was sitting at the workshop waiting for the plate to come back, I installed my stereo and got an alarm system fitted.  Could be an idea to get an alarm fitted so you can park your car when you get it...

In the end, the wait is all worth it.

Should have some news next week, hopefully.

I couldn't even look at mine. It was sitting in a garage in Brissy while I'm in Tassie. Mine was seven days then I got a call saying they'd stuffed up the paperwork and it was another five days. It's currently on a truck somewhere between Brisbane and Melbourne. Or it's supposed to be. Waiting sucks.

Hi guys, normally the work on the car is completed in a couple of days and the Vehicle Inspection Certificate (VIC) submitted to DOTARS via the Internet.

It then really depends on how many VIC's are in the system as to how long it takes. Can be between 5-10 working days. Then once DOTARS clear paperwork it gets electronically transferred to NIDDRIE who make up Compliance Plate. Once the RAWS workshop pays then they send it out. If the workshop pay an extra $35 they can have it the next day, otherwise it gets sent registered post which can take 3-5 working days.

So start to finish about 2 to 3 weeks!!

If anyone has any questions please feel free to give me a call and I'll answer them. In case you haven't guessed by now, we have a RAWS workshop in Sydney:

Performance & Prestige Imports @ Kirrawee

02 95424280

Regards

Mannie :headspin:

sspi thanx for sharing the info. I was just wondering is there anyway i can check online if the vehicale been approved for compliance? as you mentioned workshop submits everything via internet so i am thinking there might be a way to check?

- Pavel

sspi thanx for sharing the info. I was just wondering is there anyway i can check online if the vehicale been approved for compliance? as you mentioned workshop submits everything via internet so i am thinking there might be a way to check?

- Pavel

SSPI actually did my compliance hehe... They actually can tell you if its gone through by looking on their computer through some database. Was so happy when I heard the news came in, but then got shafted cause RTA wanted to inspect my car which is a whole other issue, other than that, its still worth the wait I reckon.

Stick in there is all I can say

sspi thanx for sharing the info. I was just wondering is there anyway i can check online if the vehicale been approved for compliance? as you mentioned workshop submits everything via internet so i am thinking there might be a way to check?

- Pavel

Hi Pavel,

If you go to following link

http://raws.dotars.gov.au/rawswebpublic/RA...ubVehSearch.asp

and type in your VIN, will be 6U9000ECR33xxxxxx

it will show you if DOTARS have cleared the RAWS paperwork so as Compliance plate can be issued. If its there than it is a matter of 1 day for compliance plate to arrive at RAWS if they pay the extra $35 for air mail, or about 3-4 working days if it comes the no extra cost registered mail.

Mannie

Mannie,

Thanx for the info, just got a call from the workshop and good news, been approved.

Went to the DOTARS web site , did a search and found my r33 :(

Plate Approval Date: 28 September 2004

Will be expecting for a plate to come down end of this week and hopefully will have the car on the road next week.

- Pavel

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
×
×
  • Create New...