Jump to content
SAU Community

list of interchangable parts??

inark

By inark,
in Four Door Family & Wagoneers

 Share

Recommended Posts

inark Grand Master

inark

Posted
Posted

between a ceffy and an S13???

does anyone know for certain or have a list of stuff that is??

a better description that "suspension" too :D ie. tie rods, castor arms, coilovers will fit etc

cheers

Link to comment
https://www.sau.com.au/forums/topic/51486-list-of-interchangable-parts/
Share on other sites
Mr Eps Grand Master

Mr Eps

Posted
Posted

Stock S13 susp. will drop the cef 1.5 inches (or something like that) due to it's weight and the like...

coilovers fit, the ONLY thing you must do with S13 suspension is the upper bushings are offset on an angle, while the A31 bushings are inline

for example, if you had the two suspensions lined up with the bottom "o" rings facing the same direction, (O = bushing and X = bolts to the car) they would looke like this

X X

O(a31) and O (S13

X X

this is fixed by loosening the central bolt and swiveling the bushing, then slotting it into the A31 then redoing it up (if that makes any sense, i hope the dogpoo diagram i made makes sense and doesn't come out muddled up on the site...)

OK so it muddled up and now makes NO SENSE whatsoever, THAT'S IT I'M NEVER POSTING EVER AGAIN!!!!

too_much_boost Mentor

too_much_boost

Posted
Posted

i used S13 front seatbelts in my cef as mine were stuffed... so i guess they fit.

* Coilovers are the same

* front brace are the same, but rear is same as R32 is the strut top holes are different rotation (as per Mr Eps screwed up diagram), or S13 ones can be redrilled to fit

* front brakes and stub axles are the same as SR20DET S13 (ie woeful)

* front lower control arms are the same

* front castor arms are the same

* all rear arms are interchangable.

* engines are interchangable (well, SR into my Ceffy seems to fit anyway :cheers:

I have heard that the swaybars are same as either S13 or R32.. I'll have to try my spare S13 ones to check

I have a cef and 2 x s13's at home, so finding things out like this is pretty easy for me.

dangerous_daveo Grand Master

dangerous_daveo

Posted
Posted
Seats are the same rail design as R32 and R33.

JK

You sure??? Cause I have some mighty big holes around my rails, and I have R33 seats in there. And the r33 rails dont look as if they are in the stock holes.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • sunsetR33
      Unpeeling the Orange

      By sunsetR33 · Posted

      If I had "perfect R33 GTR" kinda money I would have bought one of the crazy expensive low mileage HJA cars, but I am sadly not that wealthy. I already picked this car out of various Skylines for sale locally, most of which were worse in some way. Only a few cars were actually better but also more expensive. In terms of buying a motor locally, I at least have the option to inspect it myself and juding the seller as a person, and used or freshly rebuilt engines that some people sell are actually ok price-wise. I knew the car was going to require work, but shit piled up real fast and I haven't even driven 1000km yet as the turbo started oiling like a bitch within a few weeks after I got the car.   I assume it wasn't actually me who cracked it, though there is no way to know when that crack formed and if the previous owner even knew it was there. Buying another 05U Block can be a gamble, yeah, but the cheapest PRP cast block is like twice or more money-wise, and billet is 3 or 3 times as much. For now I am most likely just keeping the current engine, as a rebuild or engine swap isn't happening right now. But I am seriously considering buying a second engine and selling mine in return. Might be a sweet deal at the end.
    • sunsetR33
      RB26 turbo oil banjo bolts

      By sunsetR33 · Posted

      Hi all. I need some help buying the correct size banjo bolts for my 2860 turbos. Because whoever installed them tore up the original part, I ordered new ones of this kind, because I just figured these were the most leak-resistant option as I already had trouble with a shitty braided line. I need to know the thread size of the smaller left hole, that is the turbo oil feed connection. I found out so far that the turbo oil inlet apparently has a 7/16"-24 thread, but I cannot find any listing or description of the thread size on this line. I do not have the original bolts. I tried using the bolts that were in the turbos (the ones that were mounted with the shitty braided line) but they sit very loosely so they can't be the right thread. Means either these bolts are the wrong ones (how do they fit the turbo then? no clue) or the wraparound-lines have a different thread than the turbo oil feed itself. Help is appreciated, asking Nissan directly is obviously not going to work.
    • sunsetR33
      ugently need expert / experienced opinion

      By sunsetR33 · Posted

      EDIT: PSA to whoever stumbles upon this thread. It is in fact a crack in the block that caused this concern. Just letting you know. In my case, a few cm long hairline crack going horizontally above the turbo oil feed. Classic RB shit I guess
    • Dose Pipe Sutututu
      RB25DET Series 1 & Series 2 Gearbox Identification

      By Dose Pipe Sutututu · Posted

      Might as well pop in some cams, head gasket, head studs, and a flex sensor. Full send.
    • Dose Pipe Sutututu
      RB25DET NEO Cylinder Head

      By Dose Pipe Sutututu · Posted

      Yeah I spent close to a year finding one. I was even tempted to buy a RB25DE N/A head and port it out. That latter option, could still be an option.
×
×
  • Create New...