Jump to content
SAU Community

Recommended Posts

Hey all.

I've heard conflicting (annecdotal) evidence 'bout both high flow sumps with "windage" trays and injectors.I know one V.nice R32 GTR in our area that has an aftermarket sump(brand?I can't remember)that had problems with the physical depth of the thing grounding out.Others have a rep' for having the baffles that'll only work in a straight line(i.e.:drag racing).I need extra capacity and baffles to stop oil starvation for track use...any ideas?

Equally,I'm looking at putting injectors of the 700cc range.I hear from various trustworthy sources that my Power FC wont like certain types of injectors(Sard comes to mind-something about weird impedence rates?)...Likewise:any info'?

Link to comment
https://www.sau.com.au/forums/topic/51776-whaddaya-know-bout/
Share on other sites

With regards to sump baffling, why do you need an oversized sump? A standard sump will hold 5 1/2 litres comfortably and with the Tomei baffles and oil restrictors, I have never heard of a car going pop. Im still not 100% sure on why people need increased sump capacity...

As for injectors, the Sard 700cc's are a little 'wierd' to work out, but Ed is getting there with them, and once he finishes sussing them out on mine he should have the settings ready to punch straight into yours. The problem lies mainly with injector lag time, they lag a little more than Sard claim they do.

With regards to sump baffling, why do you need an oversized sump? A standard sump will hold 5 1/2 litres comfortably and with the Tomei baffles and oil restrictors, I have never heard of a car going pop. Im still not 100% sure on why people need increased sump capacity...

As for injectors, the Sard 700cc's are a little 'wierd' to work out, but Ed is getting there with them, and once he finishes sussing them out on mine he should have the settings ready to punch straight into yours. The problem lies mainly with injector lag time, they lag a little more than Sard claim they do.

The idea behind more "litre-age" is the oil "works" less,therefore stays cooler...plus there's a greater volume in the sump at any given time,therefore less likely to "run dry" momentarily...I'll be running an oil cooler,too,so I'm just covering all bases.Don't want to fork out for a second rebuild!

I guess I'll owe you beers/favours,being that your car is being the test mule when it comes to injectors!So you're thinking the Sards will be OK?

This topic has been covered many times in the Forced Induction Performance forum.

Some of my posts from there follow;

The Trust kit for GTR's is very simple, it extends the sump downwards (reduces ground clearance) and has an extended pick up and a cylindrical baffle. It increases oil capacity by ~1.25 litres. The Performance Metalcraft sump we use has wings (so it does not reduce ground clearance) out both sides with one way doors and baffles. It does not need an extended pick up. It increases oil capacity by a bit over 2 litres.

In funtion there is really no comparison, a winged and baffled sump is by far a superior solution.

---------------------------------

Question about fitting, engine out or not

It takes about the same amount of time to do it in the car, but there are no complications or risks. It is pretty hard to get the wiring wrong or damage the clutch if you don't take them out. I strongly suggest you jack up the car and have a look for yourself. Basically everything under and/or attached to the sump unbolts, so you remove all that stuff and there is easy access to the sump itself.

My suggestion is to have a chat to a few of your local workshops.

--------------------------------------------------------

A larger sump is not a substitute for an oil cooler on the circuit, it doesn't matter how much oil you have in the sump, it will eventuially heat up. My personal recommendation is that an engine oil cooler is a must on ANY GTR that sees the circuit.

--------------------------------

Try www.hioctaneracing.com.au if the Performance Metalcraft site doesn't work, same people.

Hope that helps :(

I guess I'll owe you beers/favours,being that your car is being the test mule when it comes to injectors!So you're thinking the Sards will be OK?

The Sards are going ok in mine, havnt had any major problems with them. Even on 22psi (the highest boost I will take them on standard pump fuel) ed has them setup good enough that they never see over 80% duty cycle. This will be reduced a little more as we work them out 100%, id say we've got them 90% worked out.

Ill also have to take you for another drive as the camshafts arrived today and should be going in tomorrow (along with the dreaded hks twin plate, so no laughing when i continually stall the car :()

Who tuned your car meshmesh? Everyone I spoke to, including some high profile sydney tuners all said Sard 700cc's were a bastard to get working properly

Got it all done at ICE Performance.. the only "minor" hickup which I can think of, was a "starting" issue, but was solved very quickly with a new more powerfull battery, sealing the connectors on the bosch pump (though a relay would have been better), and Nigel did some of his magic tuning with the Power FC for the injectors... But all was fixed, and nothing whatsoever was an issue, infact SAU member markr34gtr has SARD 700cc injectors in his 34GTR and at the moment he's pumping over 400kw at the wheels.

Maybe have a chat to Nigel at ICE or markr34gtr.

Amaru & LTS..

That's the first I've heard anything about the SARD injectors?? We had the 700cc SARD's on our GTR, with the Power FC, bosch 044 pump, HKS GT2530's etc etc.. never had a problem.

Hi Meshmesh.

EXACTLY what I wanted to hear:that set up is where my car is heading...

The Sards are going ok in mine, havnt had any major problems with them. Even on 22psi (the highest boost I will take them on standard pump fuel) ed has them setup good enough that they never see over 80% duty cycle. This will be reduced a little more as we work them out 100%, id say we've got them 90% worked out.

Ill also have to take you for another drive as the camshafts arrived today and should be going in tomorrow (along with the dreaded hks twin plate, so no laughing when i continually stall the car :D)

Ah,Grasshopper!One is very curious of the results when one speaks of these mythical beings:"camshafts",you call them?!Y

Yeah-keen to see what a difference they'll make:should be VERY noticable,from what I hear...And don't panic about the twin plate:you can get your own back laughing at my a** once mine has the triple plate AP Racing fitted up...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Was going to say the car pulls up nicely everywhere, especially going into that last long right hander before the main straight. Looks like a lot of fun.
    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
×
×
  • Create New...