Jump to content
SAU Community

Recommended Posts

Been looking around for a Skyline for the last few weeks and stubled across a GTS4 the other day. Are they any good, or just plain too slow since they're N/A ? If anyone out there has one, what times have you run the 400m in ? Is the 4wd handling a lot better than in a rwd ?

Hmmm... they certainly still look nice and given the savings in both the cost of the car (over a turbo) and insurance wise, I might be tempted! :)

Opinions anyone ?

Link to comment
https://www.sau.com.au/forums/topic/5188-are-r33-gts4s-any-good/
Share on other sites

I have been looking for one of these myself for a couple of months, they are a rather rare beast.

There are two that I know about, PVAs car, and another for sale in Adelaide at the moment. Standard they are certainly no rocketship, but have a lot of good features that come standard.

It would be rather easy to add a turbo (or two) and end up with a rather quick car, for around half the cost of a GTR. If you buy a GTSt, it would be just about impossible to fit 4WD or ABS onto it later.

Smoking the tyres and sliding around all over the place may be fun, but it is neither fast nor safe, particularly in the wet in my opinion.

Originally posted by EXIT

Was after a black one, but gunmetal is nice too - how much are you asking ? How fast will it do the 400m ? (whaddayamean "I've never raced it!" :D )

did I mention it is AUTO... :) COnversion to manual can be made

anyway if you still interest it PM me.... Give you the details.

cheers

Joe

I have seen gearboxes go for about two grand. then you need a clutch, flywheel, lots of small parts. You need to fit a clutch pedal.

It sounds like a heap of real expensive trouble to me. I am waiting to buy/import a manual. They do not cost any more to buy, so why bother.

I've been driving a R33 gts-4 sedan for just over a year now, it's not to bad just don't get a sedan...... it is very hard to get parts for it, no info is available so it is a see if the part fits deal.

Also the brakes and stud patern is an issue if stock.

Still a fun car ....:D

Originally posted by alistern

I've been driving a R33 gts-4 sedan for just over a year now, it's not to bad just don't get a sedan...... it is very hard to get parts for it, no info is available so it is a see if the part fits deal.

Also the brakes and stud patern is an issue if stock.

Still a fun car ....:)

New Breaks and Rotors can be purchased on DBA (Disk Brake Australia) australia. I have sent my old Rotors to them and they told me they will produced them... so if anyone need new Rotors and Brake pads give them a Ring...

it's 4 stud GTS-4 Rotors etcs...etc.

cheers

Joe :D

I hope this helps people!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean, I can confirm the TPS is at 100%.... I can confirm when we installed the TB and setup the cable that the TB was indeed fully open at max pedal travel.. the same 'curve' (WRT MAP vs MAP) existed with the previous setup/TB/manifold as well... No, we did not do a run with no intake connected. I would love to go back in time to do such a run to rule out the intake. It would have also been good to do a run with the airbox lid off. There's a test there where increased IAT vs more available air could be a positive tradeoff. I remember taking the lid off my R34 Turbo setup back in the day and noticing a monster increase, even if IAT's did go up. Could be similar. Hard to test unless I find a very deserted road. 
    • That's actually encouraging to be honest. my motor was rebuild many years ago but it's probably done less than 30,000kms and fucc all limiter or drift, majority street / drag / roll racing. It'll be fine 💪🏼 I don't even have lines or a can for the cam breathers installed yet, there is zero oil residue or splatter on or around them, it drives beautifully so it seems healthy. Just a ticky lifter, yet they're almost brand new oem genuine Nissan and haven't done many kms at all...
    • Have you confirmed the throttle body goes to WOT (and stays there) during the run?
    • I'm having a problem. I think it was mentioned above somewhere but can't see it.  I'm stuck in the cycle of, sand, filler, low spot again, put filler, sand, low spot again, now i put filler again and a thicker portion which seems to have helped but I got low spots in other areas. In the image. Circled in red thats where the original low spot was and the shape is the same as the red out line. I've more or less fixed that (still low spot up the top but now I have low spots where the green circled part is.  Is likely the issue that I didn't start with a course sand paper? I sanded the filler with 240 to reduce the risk of not going to far but maybe the issue is that I'm only taking off enough material to remove some of the filler but not the high spots. I now started sanding with 120 and I think I'm seeing a difference. I did fix one dent the other 2 are f**ked and seems like I made another low spot which is indicated by the furthest green circle on the left handside. Any thoughts and solutions?   Also second image. All of these rock chips, can they be filled in with primer or do i need to fill them all with filler/putty? So many rock chips on mine lol.
    • Well, I had an Edward Lee's special edition odo windback car/motor with a RB25DET S2 and I put down 372kW with a good amount of track abuse for 1.5 years before the ring lands decided it didn't want to stick around anymore 🥲 But probably didn't help I kept on smashing try limiter on the track and a few skid pans.
×
×
  • Create New...