Jump to content
SAU Community

Recommended Posts

Hey BLakniTE $10 doesn't really bother me at all. dazsQ is looking after us I don't think he is even making money out of this. I spoke to him about it. at first it was $150 for them but dazsQ managed to score it down for us. And these dials are coming in on tuesday/wednesday Yay can't wait. He is offering us fast service quality dials. I really can't be bothered saving that $10 and getting some different type of dials and waiting a month or so. I have heard that there are $80 dials floating around but they don't match up to their numbers properly end result needing to get your whole needles recalibrated. So much more hassle.

Blaknite: Could you like get some pictures of the dials you are getting for $130 and we can compare the dials when ours come in and if it really is the same then you could like organise next group buy for the r34, r32. Really $10 doesn't bother me aslong as i get my dials and they fit nice n neat. I mean c'mon i was about to purchase some off ebay and it was like $200 then found another place which was like $250

  • Replies 204
  • Created
  • Last Reply

Top Posters In This Topic

ditto to obtainr!

i tottally agree...wats 10 bux? all the trouble dat dazsQ is going to, organising this group buy is worth more then daT!

so i dun mind paying the extra 10 bux!

i cant wait for the dials as well!

they loook very nice especially at nite!

I didnt say he was making money out of it. I thought the forums was to help ppl out. For $130 deliveried express, you would be saving about $20. Sure its not much but just thought it would help.

Sorry, didnt mean to upset ppl.

Hey guys, this is the final list of people who've paid:

Jive

Mr_G

Nemesis

Vape

BlackGTS-t

TMPTD

Shane

Dacow

Guilty

Koraxis

Ryan D

DVS33T

Paully_tee

SKYLNR

mud

line_up

arm85

if theres anyone not on this list plz PM me ASAP!! If all goes to plan the dials should be coming in later today, I'll post again when they've come

Cheers Daryl

How many of you guys are installing these yourselves? Im not too sure how to hook up the power unit.. And do u just slide these over the top of the factory dials?

Hey buddy, if you read through the posts regarding this thread, look at one of the post made by myself... It gives a link for installation. Im installing mine myself, and for the power, im pretty sure its simple, just run the black negative wire to any metal on the car... With the positive, just connect it to your red wire on the cigarette lighter... Hope that helps...

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
    • The axels in my R33 seem tired, and have a bit of play in them. I cannot find any new of course, not interested in buying used, but I am looking to see if anyone can identify some cross compatible axles. In the states I have seen suggested for S chassis the J30 axles, however for the skyline (as best I can tell) the lengths are about an inch off (2.5cm) on both sides. R33 my measure L 22" R 24.5" GPT L 22.5" 24.25" J30 L 23.5" 25.5"  so shaft length is probably an inch wider. Not sure if someone has another still remanufactured option besides the J30. I figured worst case I can buy a pair tear them down and swap the center shaft. My other option was reaching out to GSP to see if they cannot piece together a set, since the axle stubs are still manufactured, I wouldn't think it be that hard to find a shaft or make a shaft work. 
×
×
  • Create New...