Jump to content
SAU Community

Recommended Posts

just a quick question which you guys should be able to answer.

I've been watching a lot of Initial D lately and I've been noticing that when say Itsuki or Takumi speak to Kenji or Iketani (who are older) they call them "sempai" - what does "sempai" mean?

Also when they talk to chicks they put some that sounds like "chan" at the end (eg. Natsuki-chan or Saori-chan etc...) why? oh and Mogi calls Takumi "Takumi-ku" what does the "ku" bit mean?

Thanks.

Link to comment
https://www.sau.com.au/forums/topic/52362-japanese-naming-rank-system/
Share on other sites

ok heres just what i know, im pretty sure someone can explain it better.

(used instead of san, ie yukio-san)

senpai = someone that they look up to, like iketani is pretty much the older one so they use senpai

chan = is usually what they use for kids, for girls it makes it sound cuter, like crayon shin chan

kun = is what they use usually for teenage guys, ie takumi-kun

but really it all depends on which ever is cuter...that is for "CHAN" which can be used for guys also.

KUN is not used for just teenage guys but rather for those who are younger then you.

In the office they all call me Troy-kun where as my colleague they call him Glen-chan.

Girls almost always use "chan" to other girls if they know each other, but change that to "san" (after their family name) if they don't know the other.

I'd say if someone used "chan" after a guys name, its almost always for a toddler/young boy... if it's used for an older mature guy it must either be as an office joke, insult, or he's gay and is down with the whole feminine thing... (but I agree with Troy, "Glen-chan" rolls much better than "Glen-kun" so that'd be an exeption)

I'm gonna disagree slightly - '-chan' is attached to just about anyone by teenage girls (or those who act like teenagers), usually combined with the 'cutsie' tone. The same girls are just as likely to use 'ore' or 'boku' as they are 'atashi'.

sempai is something that is used in many aspects of society (arts, sports, work, etc), but first encountered and perpetuated at school-level - most often in school clubs - the sempai will be the older student who shows the younger students 'the ropes', tutors them, bosses them around, and so on

troy summed up 'kun' very well

-ku I haven't heard myself

Reading through this thread and I just thought, in all the years I've been here I can never, ever recall being called "deibito chan"...

I should clarify I prefer to go by my full name David, when in Japan, mainly because when Japanese kids say Dave (debu) they think it's funny....now anyone who has ever met me can attest, I'm anything but "debu" :P:) :)

Could be worse though, I work with a guy at one place, his name is Keith and the kids all call him "kiss Sensei" ! :)

Following on from that (and still on topic I hope :P) - for the Japan residents, when in Japan how do other people - students, colleagues etc address you? Do they pronounce your name properly - or just say it katakana style? I hardly ever meet people that actually say "David"...it's always "deibito". Even the teachers and everyone I work with calls me "deibito"....so after a while you get to the point, well I have at least, where people ask my name and I just reply "deibito"... :)

bugs me a bit though...many of them are keen to learn spoken English, with an emphasis on correct pronunciation and they can't even be bothered to get my name right! :)

They don't say "Debido", Dave? They say "Debito"? The "to" and "do" I thought would be easy, but I guess anythings possible!

I for one can never recall being called "Jasutin chan" either... and whenever there were teenage girls around, they had at least a little respect for the guys by not calling them "... chan" unless it was a joke or not being serious...? Even to Japanese guys...

Anyways... I get called "Ji-ya-s-tin"... hahaha pretty boring!

Troy: I'm majorly hungover... cheers for footing the taxi fare :P

Nah...it's "deibito"...

I think my ignorance when I first got here is partly to blame - you know how it is, you start filling in forms, registering at places and if you don't have your name written down correctly, in Katakana, from the start, then it becomes really difficult to change it later...

funnily enough, about 3 months after I got here, studying katakana, I discovered that it's possible to write "David" almost exactly using katakana - " デヴィド " The "v" katakana doesn't appear to be very popular...I mean, Vodafone prefer to write it as "ボーダフォン" rather than "ヴォダフォン" :confused:

my work mates and I have a unique ranking system for women....its like the the cars at the auction's.....Golden corner(first owner,never been crashed) before damaged and now repaired section(had more hits than the beetles,however a clean unit can be obtained)Damaged unrepaired(a mess,but spend some time playing with it and massaging it on the CAR-O-LINER and it can become come your pride and joy)No paper....for parts(Unregisterable,a complete mess,very ugly) ..it may be something like that ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The average previous owner for these cars were basically S-chassis owners in the US. Teenagers or teenager-adjacent. I often tell people that neglect is easier to fix than something that was actively "repaired" by previous owners.
    • Update 3: Hi all It's been a while. Quite a lot of things happened in the meantime, among other things the car is (almost) back together and ready to be started again. Things that I fixed or changed: Full turbo removal, fitting back the OEM turbo oil hardlines. Had to do quite a bit of research and parts shopping to get every last piece that I need and make it work with the GT2860 turbos, but it does work and is not hard to do. Proves that the previous owner(s) just did not want to. While I was there I set the preload for the wastegates to 0,9bar to hopefully make it easier for the tuner to hit the 370hp I need for the legal inspections that will follow later on. Boost can always go up if necessary. Fitted a AN10 line from the catch can to the intake hose to make the catchcan and hopefully the cam covers a slight vacuum to have less restrictive oil returns from the head and not have mud build up as harshly in the lines and catch can. Removed the entire front interior just shy of the dashboard itself to clean up some of the absolutely horrendous wiring, (hopefully) fix the bumpy tacho and put in LED bulbs while I was there. Also put in bulbs where there was none before, like the airbag one. I also used that chance to remove the LED rpm gauge on the steering column, which was also wired in absolute horror show fashion. Moved the 4in1 Prosport gauge from sitting in front of the OEM oil pressure gauge to the center console vents, I used a 3D printed vent piece to hold that gauge there. The HKB steering wheel boss was likely on incorrectly as I sometimes noticed the indicator reset being uneven for left vs. right. In the meantime also installed an airbag delete resistor, as one should. Installed Cube Speed premium short shifter. Feels pretty nice, hope it'll work great too when I actually get to drive. Also put on a fancy Dragon Ball shift knob, cause why not. My buddy was kind enough to weld the rust hole in the back, it was basically rusted through in the lowermost corner of the passenger side trunk area where the wheel arch, trunk panel and rear quarter all meet. Obviously there is still a lot of crustiness in various areas but as long as it's not rusted out I'll just treat and isolate the corrosion and pretend it's not there. Also had to put down a new ground wire for the rear subframe as the original one was BARELY there. Probably a bit controversial depending on who you ask about this... but I ended up just covering the crack in the side of the engine block, the one above the oil feed, with JB Weld. I used a generous amount and roughed up the whole area with a Dremel before, so I hope this will hold the coolant where it should be for the foreseeable future. Did a cam cover gasket job as the half moons were a bit leaky, and there too one could see the people who worked on this car before me were absolute tools. The same half moons were probably used like 3 times without even cleaning the old RTV off. Dremeled out the inside of the flange where the turbine housing mates onto the exhaust manifolds so the diameter matches, as the OEM exhaust manifolds are even narrower than the turbine housings as we all know. Even if this doesn't do much, I had them out anyways, so can't harm. Ideally one would port-match both the turbo and the manifold to the gasket size but I really didn't feel up to disassembling the turbine housings. Wrapped turbo outlet dumps in heat wrap band. Will do the frontpipe again as well as now the oil leak which promted me to tear apart half the engine in the first place is hopefully fixed. Fitted an ATI super damper to get rid of the worn old harmonic balancer. Surely one of the easiest and most worth to do mods. But torquing that ARP bolt to spec was a bitch without being able to lock the flywheel. Did some minor adjustments in the ECU tables to change some things I didn't like, like the launch control that was ALWAYS active. Treated rusty spots and surface corrosion on places I could get to and on many spots under the car, not pretty or ideal but good enough for now. Removed the N1 rear spats and the carbon surrounding for the tailpipe to put them back on with new adhesive as the old one was lifting in many spots, not pretty. Took out the passenger rear lamp housing... what do you know. Amateur work screwed me again here as they were glued in hard and removing it took a lot of force, so I broke one of the housing bolts off. And when removing the adhesive from the chassis the paint came right off too. Thankfully all the damaged area won't be visible later, but whoever did the very limited bodywork on this car needs to have their limbs chopped off piece by piece.   Quite a list if I do say so myself, but a lot of time was spent just discovering new shit that is wrong with the car and finding a solution or parts to fix it. My last problem that I now have the headache of dealing with is that the exhaust studs on the turbo outlets are M10x1.25 threaded, but the previous owner already put on regular M10 nuts so the threads are... weird. I only found this out the hard way. So now I will just try if I can in any way fit the front pipe regardless, if not I'll have to redo the studs with the turbos installed. Lesson learned for the future: Redo ALL studs you put your hands on, especially if they are old and the previous owners were inept maniacs. Thanks for reading if you did, will update when the engine runs again. Hope nothing breaks or leaks and I can do a test drive.
    • No those pads are DBA too  but they have colors too. I look at the and imo the green "street" are the best.
    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
×
×
  • Create New...