Jump to content
SAU Community

Issues with compliance R32 GTR with T78

RTFGTR
 Share

Recommended Posts

aybee Experienced

aybee

Posted
Posted
These guys aren't stupid, they've worked in the auto industry for many years and usually know exactly what they're looking at.

its pretty funny that you say that, cause the guy that engineered my car had no idea about my turbo. the compliance guys convinced him that it was just the stock turbo on a different manifold. he must have been stupid cause he believed him and signed it off.

Vic Roads wasnt a problem either. The guy actually put his hand on the turbo when he was looking for the egine number. :rolleyes:

the only tricky thing is RWC...

.

predator Grand Master

predator

Posted
Posted

There are a lot of people that don't know their stuff, but then you will run into those that do. It only takes somebody that *does* along the way and you're in trouble. And things only get stricter each year. Seems to me you have about three options:

a) take it to another state and try and transfer the rego (two lots of rego, etc) and see if the engineers can be still valid.

B) remove the turbo and return it mostly to stock (probably best option).. although soon as you change it back the engineers is invalid, so is any insurance (including if you hit a person on the road), and you only have to get pulled over by a nice policeman in vic and you're back where you started.

c) pay off the right people ..

You don't have much other options to totally frank. VIC is *strict* - damn strict.. .on most things. Just remember when it comes to insurance the story will be exactly the same.

RTFGTR Proficient

RTFGTR

Posted
  • Author
Posted

Fark that...

RWC and engineering certificate will all be done in VIC. I have seen a few T78 big single modded R32's on the roads in VIC. It is possible and it will be done! I now have a few good options and I'm going to keep the keyboard quiet untill it's done. VIC is strict and even more so since unfortunate crash yesterday... heard that all cops were sent memo to book all "imports" with P plates (which will mean all imports get anal probes for the next month or so P's or not)

predator Grand Master

predator

Posted
Posted

there are a lot of illegitimate cars in melb.. many shouldn't be on the road according to any applicable law - but they are.. see point c) :)

also see point B) - if you get an EPA (very likely seeing as just about every VIC skyline owner has had one.. inc me when i was there).. and you will have to remove that turbo.. no two ways about it. And the EPA are the clueist people I have ever seen inspect a car - I guess if you see a few hundred skylines you tend to know what a completely stock one looks like.

ocean Rising Star

ocean

Posted
Posted
Fark that...

RWC and engineering certificate will all be done in VIC. I have seen a few T78 big single modded R32's on the roads in VIC. It is possible and it will be done! I now have a few good options and I'm going to keep the keyboard quiet untill it's done. VIC is strict and even more so since unfortunate crash yesterday... heard that all cops were sent memo to book all "imports" with P plates (which will mean all imports get anal probes for the next month or so P's or not)

Does anyone know of a decent but reasonably priced compliance workshop in melbourne? I have a GTR coming with 2xGT2530's.. One workshop wants over $1500 to compliance the car, which i cant help but feel is a bit expensive,

Any help would be greatly appreciated :)

-Patrick

RTFGTR Proficient

RTFGTR

Posted
  • Author
Posted
Does anyone know of a decent but reasonably priced compliance workshop in melbourne? I have a GTR coming with 2xGT2530's.. One workshop wants over $1500 to compliance the car, which i cant help but feel is a bit expensive,

Any help would be greatly appreciated :)

-Patrick

I only know of 2 and would recomend 1 - PM sent.

meggala Grand Master

meggala

Posted
Posted

you safest to conver to tiwins for reg and engineering I always try to comly and reg my cars as stock as possible and they tend to go through quickly . my record for compliance and sign off is 2 1/2 days on the rb25 cef rwc was easy with it as well. if you want to play wit the big boys ie t78 you need to pay

cheers

xqt00r Newbie

xqt00r

Posted
Posted

Basically you are registering the car if it were new, so it would have to comply with ADR of the day. In other words your car would have to be a stock GTR R32.

If they wanted they could nknock you back for steering wheel, gear knob etc, etc ,etc.

Trying to legally get a T78 engineered and approved was a bit of an ask, when most people keep egtting defected for having a BOV.

????

SteveL Mentor

SteveL

Posted
Posted
If they can engineer and register turbo conversions in dattos, I don't see how a big single on a TT RB26 in a GTR is a problem.

Couple of differences:

- the emissions regs on older cars (eg datsun 1600's) are nowhere near as strict as on cars like GTR's

- engineering a turbo conversion requires a lot more work on the engineers part than an inspection to meet 15yo requirements. For example a full brake test would be mandatory (brake performance/fade, etc). In this case I've got no doubt the engineer has seen the single turbo, realised the car is not standard to a greater extent than he would otherwise accept, and decided he'd rather not take the risk.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • Dose Pipe Sutututu
      Unpeeling the Orange

      By Dose Pipe Sutututu · Posted

      When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • GTSBoy
      Unpeeling the Orange

      By GTSBoy · Posted

      Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • Kinkstaah
      Unpeeling the Orange

      By Kinkstaah · Posted

      This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Dose Pipe Sutututu
      RB20DE NEO smallbox clutch.

      By Dose Pipe Sutututu · Posted

      Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...