Jump to content
SAU Community

Recommended Posts

I am removing the RB20DET (minus gearbox) from my car to make way for something else. The engine is in generally ok condition. The engine has 120,000km's.

RB20DET parts for sale.

RB20 Head with valves, cams and pulleys. (no rocker covers) $100 *SOLD*

RB20 Cam angle sensor (CAS) $80 ***SOLD***

RB20 Bottom end (pistons, rods, crank etc..) $150 *SOLD*

RB20 Exhaust and intake manifolds $50 *SOLD*

RB20 Coilpacks $50 *SOLD*

RB20 Plenum $50 *SOLD*

RB20 stock turbo with very minimal shaft play, lines and stock dump pipe $250!!

RB20 injectors and fuel rail $80 *SOLD*

I am located in Perth, don't mind sending interstate via cod at your expense, please email me rather than pm.

[email protected]

Link to comment
https://www.sau.com.au/forums/topic/52472-wrecking-rb20det/
Share on other sites

Turbo is in very good condition for it's age, has not been boosted ever. Very minimal shaft play (only tiny bit back and fourth). No less than $300.

Fro-Daddy, selling actuator with turbo.

Please pm me with further questions as i dont get to many opportunitys to come online.

Link to comment
https://www.sau.com.au/forums/topic/52472-wrecking-rb20det/#findComment-1045170
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • Thank you so much for the help
×
×
  • Create New...