Jump to content
SAU Community

Recommended Posts

Hi all,

I've got a 25 with top mount manifold running a t3/t4 which is supposed to be a 450hp turbo.

Now my questions are as follows...

If a turbo is rated at 450hp at 20psi what power in kw will it make at the wheels ?

Which is the best turbo for a 25 as an upgrade out of gt30,gt35,gt3540 or gt3040.

I dont want exessive lag so i was going for a .82 exhaust housing so i basically want to know which will go about making 300rwkw with the most bottom end to midrange on the least boost.(ideally 18psi)

Thanks for any help.

Link to comment
https://www.sau.com.au/forums/topic/52507-rb-25-det-turbo/
Share on other sites

If a turbo is rated at 450hp at 20psi what power in kw will it make at the wheels ?

450bhp / 1.34 = 335kw

less ~60 kw for losses = 275 rwkw.

An example, we have an R34GTT with a GCG ball bearing hi flow and it makes 265 rwkw.

Hope that helps :uh-huh:

Link to comment
https://www.sau.com.au/forums/topic/52507-rb-25-det-turbo/#findComment-1034445
Share on other sites

What about this turbo pushing 7psi on some crazy 6ltr stroker ? stupid I know but the car will make more then 450HP !!

Its silly to assume the turbo on any given boost is going to produce ex amount of power on your car. The turbo being rated at 450HP means it can flow 450HP but before this turbo goes on your car you might already be making more then 450HP...

As for 270rwkw at 20psi with that turbo you might not even get that !

Get your max fuel/ignition to boost levels you/your tuner want. See what power you make then that’s a clearer indication of what turbo you should go to.

IE: 14psi might be more efficient then 20psi on your car's setup. No one can answer that but the tuner on the day.

BR,

JH

1.3 bar
Link to comment
https://www.sau.com.au/forums/topic/52507-rb-25-det-turbo/#findComment-1034558
Share on other sites

What about this turbo pushing 7psi on some crazy 6ltr stroker ? stupid I know but the car will make more then 450HP !!

Ah no, the turbo only flows enough air for 450 bhp (about 45 lbs per minute). So if you put it on a 600 bhp (without turbo) engine, it will loose power. ;)

Link to comment
https://www.sau.com.au/forums/topic/52507-rb-25-det-turbo/#findComment-1034713
Share on other sites

Ah no, the turbo only flows enough air for 450 bhp (about 45 lbs per minute).  So if you put it on a 600 bhp (without turbo) engine, it will loose power. :rolleyes:

That wasnt what I said I said the 600Bhp motor would still make more then 450HP thats what I said. I know the restriction in its exhaust (the little turbo) will cause it to lose power.

Read more carefully.

BR,

JH

Link to comment
https://www.sau.com.au/forums/topic/52507-rb-25-det-turbo/#findComment-1034824
Share on other sites

That wasnt what I said I said the 600Bhp motor would still make more then 450HP thats what I said. I know the restriction in its exhaust (the little turbo) will cause it to lose power.

Read more carefully.

BR,

JH

Still no!. The turbo flows 45 lbs of air max, so the engine makes ~ 450 bhp, not 500 bhp or 550 bhp. :cooldance

Link to comment
https://www.sau.com.au/forums/topic/52507-rb-25-det-turbo/#findComment-1034833
Share on other sites

Would anyone else like to answer my q?

WHAT ****KING TURBO SHOULD I BUY TO MAKE 300 RWKW WITH THE MOST BOTTOM END TO MIDRANGE AND ON THE LEAST BOOST?

Are they all that similar with the .82 back?

Cheers :rolleyes:  :rant:

What other mods are you doing for the 300 rwkw? The turbo is best chosen with all the facts known. :cooldance

Link to comment
https://www.sau.com.au/forums/topic/52507-rb-25-det-turbo/#findComment-1034945
Share on other sites

Still no!.  The turbo flows 45 lbs of air max, so the engine makes ~ 450 bhp, not 500 bhp or 550 bhp. :cooldance

Honest to god if you believe that Im going to prove it wrong to you in person, just give me 3 weeks till this 6ltr stroker is finished and ill show you it peel over 450HP with a 450HP turbo on it. You can watch it get dynoed.

:headspin: :headspin:

Link to comment
https://www.sau.com.au/forums/topic/52507-rb-25-det-turbo/#findComment-1036759
Share on other sites

Honest to god if you believe that Im going to prove it wrong to you in person, just give me 3 weeks till this 6ltr stroker is finished and ill show you it peel over 450HP with a 450HP turbo on it. You can watch it get dynoed.

:headspin:  :headspin:

If it flows more than 45 lbs of air per minute, then it isn't a 450 bhp turbo. :)

Link to comment
https://www.sau.com.au/forums/topic/52507-rb-25-det-turbo/#findComment-1036894
Share on other sites

Oh its 450HP.... It runs 2 of them Im going to leave 1 off and dyno it  watch it crack over 500HP  :headspin: (Boat motor)

BR,

JH

Well, well, whadyaknow, here was me thinking this guy is crazy. You are going to have some strange tuning issues to overcome though. :)

Link to comment
https://www.sau.com.au/forums/topic/52507-rb-25-det-turbo/#findComment-1036910
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
    • When you pulled it off, there is no signs of blown head gasket? Is it possible you have some other issues going on? Possible cracked blocked? Or do you think it's straight up lifting the head? Did you check what the head was torqued to before pulling it down (To see if possibly they're stretching, or starting to break threads out etc)?
    • Seems like a decent result for a modded JZX110. They are bulky in comparison to the 100 and 90 models (which I'd prefer myself) but they are getting very few and far between here in JP these days. Thanks for the detailed review and the import process into the UK. I also have a car which I'm hoping to export from Japan at some stage so it's good to know if someone from the UK was interested in it. By the way the corrosion underneath is par for the course for cars which were located in/near the mountains or along the Japan sea coastline. They get huge amounts of snow every winter and the sodium chloride is used on the roads. Many cars have some kind of rubber like treatment underneath but they tend to limit it to the wheel arches underbody and fuel tank. Suspension arms and sub-frames will have similar corrosion to your JZX110 which is a common sight. See it all the time and car dealers here generally don't even mention it unless asked.
    • If the sound goes away when you clutch in, the 1.5/2 way diffs are just shit, and you are a normal person. The diff is likely "fine" but driving at anything under 30kmh is a violent horrible experience. It would be exaggerated with solid diff bushings and subframe bushings if you have those.
×
×
  • Create New...