Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

i made one of these up ages ago but the dripping put me off but i found these but havnt had time to gettin round to buyin em

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...A:IT&ih=015

pretty sure thats the answer to your problems

let me know how you go as the cbf factor is high at the moment

i made one of these up ages ago but the dripping put me off but i found these but havnt had time to gettin round to buyin em

http://cgi.ebay.com.au/ws/eBayISAPI.dll?Vi...A:IT&ih=015

pretty sure thats the answer to your problems

let me know how you go as the cbf factor is high at the moment

This will solve the problem,

I didnt get around ot buying this part as i solved the dripping issue as stated but it does give u a unwanted water spray at the same time lol

To solve your dripping problems....simply add a T-piece at a high point close to the bottle. The one i used had adjustable jets in the connectors ( from a fish tank kit ) Slightly open up the jet at the top of the T piece ( so the inline pressure won't drop) and run the water line into the top of your water spray bottle,this way you won't have any more drips emptying the bottle overnite. :blink:

post-9170-1170658477.jpg

hey has ne1 got ne pics of the actual setup, as i have bought a kit..it comes with a bag for the water with a 12v pump attached to it, a pair of nozzles, a long tube, a switch n a few screws n wat looks like a few brackets :S any help would b reli awesome. thanks in advance

hey has ne1 got ne pics of the actual setup, as i have bought a kit..it comes with a bag for the water with a 12v pump attached to it, a pair of nozzles, a long tube, a switch n a few screws n wat looks like a few brackets :S any help would b reli awesome. thanks in advance

Wher edid u ge tthe kits? its pretty straigh forward, post a pic of what ya got and ill try and help ya out.

Does any one know which wire to cut to stop the rear wiper coming on when it's hooked up to the rear washer? Or have you guys all just disconnected the rear wiper?

Just go into the boost and unclip the wring plug into the wiper. I didn ttake much notice and unpluged only one plug at the rear wiper. turns out it disabled the wiper wiping every time i sprayed but if i needed to i turn the nob forward and the wiper still wipes when i want it!!!

Hay guys, just a heads up. I am in the process, propably still 4 months away, in designing and manufacturing and kit for IC spray for R33. These will include a new washerbottle to replace the existing. It will have two seperate reservours, one for normal windscreen spray, and one for IC spray. It will come with pump, electronics, hoses, and all fittings. It will also include a spray bar or a nozzle spray arrangment, depending on what is ordered.

The kist should sell for about $250-$300, but still sometime away. I have to do a lot of testing in regards to spray patterns and final cooling temerature to come up with optimal cooling for minimal watter consumption, and being a mech engineer helps. LOL.

The kits will be available for stock and aftermarket coolers. Hardest part is comming up with instructions, beleve me, you forget how much detail is required.

The kits will be made available for an R33 to start with, and all the testing will be performed on my car and a dyno to archive optimal results. Once complete, i will be looking for some testers, say 5 or so, to test the prodcust, free of charge, and if happy, they can purchase the kit or return it as required.

After the R33 kit is finalised, the R32 and R43 will follow.

So keep an eye out.

We are looking at using the Jaycar kits already modified to suit. However there are some other kits available that will do a simmilar job.

We are looking at temperature and load controll, so as the load increases, in accordance to injector duty and airflow, the cooler will operate outomatically, also, if the inlet air temperature is too high, it will operate. There will be also a manual vertion for those who simply want on/off operation, but that is some time off yet.

  • 3 weeks later...
  • 11 months later...

what i did mate, is i had the stock fuel pump lying around, so i stuck it into the water resorviour for the window wipers, fit in perfectly. the used a hose off that and fitted some misters. the stock r33 pump works a treat. but the whole bottle is emptied in 1.33sec :blush:.

i did that because i didnt want to stick in another bottle:S and i can still use my window squirters :nyaanyaa:

Edited by r33cruiser
  • 1 year later...

just another way to avoid those drips,

I put a T-peice in the IC sprayer line (up high)and ran the extra side to a small sprayer at the top of the radiator.The top inch of the bottle may still drip. but it cools the radiator and IC

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...