Jump to content
SAU Community

Recommended Posts

Hi all RB20 fans. I wish to let others aware that TURBO'S are not always the go. I have RB20 with tripple Webers feeding it. My own design and it works well. Is putting 120kw at rear wheels. Not much you say but is fine by me. I am after a set of RB20 Extractors , tuned if possible, but not for turbo unit. Can anyone help? I also wish to install a RB25 de head and all accessories and was wondering if it does fit without dramas to a RB20. Again any assistance would be greatly appreciated. Regards RAY

Link to comment
https://www.sau.com.au/forums/topic/52594-rb20/
Share on other sites

Hi Ray,

welcome to SAU! good to see some more C110 owners joining up!

i have been doing a bit of research into putting RB25's into the C110 (as that is my plan for my GTR replica), from what i have read (there is bits about it in the thread about the RB30 bottom end conversion in this thread http://www.skylinesaustralia.com/forums/sh...ead.php?t=15420) but i have to warn you it is a very long thread!!! try looking at one of the members, joels signature, look at the pfd document he has created, it discusses it a little in there.

you need to do some extensive work to get the RB20 head to fit onto the RB30 bottom end, the RB25 head fits up to the rb30 bottom with very minimal modification (R32 RB25DE needs none, R33 RB25DE with VCT needs mods to the VCT oil feed).. so therefore you would need to do some extensive work to get the rb25 head onto the rb20 bottom..(i think the water and oil galleries do not line up)

is there a reason you want to go with the RB25 head? the only thing i can think of is the larger inlet/exhaust ports.. but it would be damn expensive (just in the mods alone, let alone the cost of the head) just to do it for that, maybe goto an RB25 bottom too (though it sort of subtracts from the whole GTR thing)

as for the tuned headers, try placing an add in the wanted section, you might get lucky!

would love to see some pics of your car, especially the engine bay!! did you do the conversion yourself?

Kent

Link to comment
https://www.sau.com.au/forums/topic/52594-rb20/#findComment-1035388
Share on other sites

Hi/ Thanks for the reply. Yes I have done all the conversion with the motor. However my 2 door is a KPGC110 (1973) not common to these shores with 4 wheel discs. rear deck spoiler, flares and all the goodies. Has been completely rebuilt over the last 2 years. I could send you photo's, however I am new to this and am unsure how to do it. I also for your help if you have a 2 door, of the 240K body shape then I have ALL manuals in English and Japanese on disc and book form. I have been collecting for 22 years.

You may wish to contact via email That is okay. What part of the world do you reside? I am in Brisbane,

Regards RAY

Link to comment
https://www.sau.com.au/forums/topic/52594-rb20/#findComment-1035529
Share on other sites

mp3 - sound file.

What Adam is saying (in normal, non computer techno geek talk) is:

"Cool. That must sound sweet. I would love to hear the Weber/RB20 setup at full song :) :headbang: :uh-huh:

I too would love to see your rig. I've got a 2 door 240k, which currently has a P76 V8 engine in there. (Sacrilege, you may say, but I'm kinda attracted to the old Skool feel of the old pushrodosaurus). The car's not a goer at the moment, as it's my long term project.

I found a wrecker down the Gold Coast who claims to have about 10 240K's in his yard. I'll try to find his number and get back to you.

Oh yeah, manual on Disk would be very sweet (unless you have a spare hard copy you'd be happy to part with)

Link to comment
https://www.sau.com.au/forums/topic/52594-rb20/#findComment-1035560
Share on other sites

Hi Let me know your address and I will burn and send one off to you. I have seen this car on the net. Is/was a bit rough when I first saw it. Mine is externally shape the same but a lot of cosmetics that are different Whats your email and I will forward some photo's of it

Regards RAY

mp3 - sound file.

What Adam is saying (in normal, non computer techno geek talk) is:

"Cool. That must sound sweet. I would love to hear the Weber/RB20 setup at full song :P  :headbang:  :uh-huh:  

I too would love to see your rig. I've got a 2 door 240k, which currently has a P76 V8 engine in there. (Sacrilege, you may say, but I'm kinda attracted to the old Skool feel of the old pushrodosaurus). The car's not a goer at the moment, as it's my long term project.

I found a wrecker down the Gold Coast who claims to have about 10 240K's in his yard. I'll try to find his number and get back to you.

Oh yeah, manual on Disk would be very sweet (unless you have a spare hard copy you'd be happy to part with)

Link to comment
https://www.sau.com.au/forums/topic/52594-rb20/#findComment-1039080
Share on other sites

I have seen this car on the net. Is/was a bit rough when I first saw it.

hahaha you're too diplomatic. Mine's rough as guts at the moment. No need to hold back - I just bought it a few months ago, so you won't offend me if you tell me you think it looks like a pile of pus (which it does :rofl: )

I just scored a full efi setup for the V8 the other day, and am planning to build a programmable ECU for it. That'll keep me out of trouble for a while.

My email is [email protected]

When you send the photos of your car, I'll email you my postal address, so you can post the disk. Thanks again for the offer.

Link to comment
https://www.sau.com.au/forums/topic/52594-rb20/#findComment-1039611
Share on other sites

Hi okay then what is the best way to increase SOME power I am not fitting a Turbo. I am trying to locate a set of extractors for the RB20 Hard to find. Not even built still from my sources in Japan. Ray

You don't want to fit a RB25 head on the RB20 block - you'll lose a heap of compression, not to mention that the bore size of the RB20 is considerably bigger than the RB20 bore size (86 vs 78).
Link to comment
https://www.sau.com.au/forums/topic/52594-rb20/#findComment-1043375
Share on other sites

I understand N/As really need longer duration cams than turbos, which probably means custom grind. Or you could try RB20DE or RB25DE camshafts.

Port the head.

Shave a few thou off the head to raise the C/R. Fit domed pistons.

Link to comment
https://www.sau.com.au/forums/topic/52594-rb20/#findComment-1043544
Share on other sites

G'day Ray. Thanks for the photos :rolleyes:

If you want extractors, just get a set of custom ones made, to suit the driving you plan on doing (ie rev range). if you shop around, you might be surprised how cheap it can be. There's an exhaust shop at Slacks Creek who do work for a great price, but I don't know how good they are at designing perfromance exhausts (have not dealt with them personally).

I believe that a well designed custom system will be better than an off the shelf system every time, as you build it for your specific needs and engine tune.

Hope this helps

Peter

Link to comment
https://www.sau.com.au/forums/topic/52594-rb20/#findComment-1046400
Share on other sites

[ Yes I have tried a few and the cost is staggering. $900, Although I wish for tuned length I am endeavouring to get modified cams and upgade a few other bits. RayQUOTE=warps]G'day Ray. Thanks for the photos :P

If you want extractors, just get a set of custom ones made, to suit the driving you plan on doing (ie rev range). if you shop around, you might be surprised how cheap it can be. There's an exhaust shop at Slacks Creek who do work for a great price, but I don't know how good they are at designing perfromance exhausts (have not dealt with them personally).

I believe that a well designed custom system will be better than an off the shelf system every time, as you build it for your specific needs and engine tune.

Hope this helps

Peter

Link to comment
https://www.sau.com.au/forums/topic/52594-rb20/#findComment-1047537
Share on other sites

something like these would be what u want .. pretty sure thats a Rb20DE ..or maybe 25 .. anyways ...same difference ..

R31house in japan i think made these .. dont quote me ..just assuming that coz the photo was on their website. ..so the headers suit R31 ..so somethingl ike that would easy fit into your car i would think.

the latter 3 pics are of a rb30 de with solex carbies i think .. or maybe something else...

Matt

Enjoy

Link to comment
https://www.sau.com.au/forums/topic/52594-rb20/#findComment-1051262
Share on other sites

Hi Ray, im also new to this forum, i noticed that you mentioned you have manuals etc on cd for the 240k. I own a c110 240k sedan and would be very interested in obtaning a copy from you if its not too much trouble - i will reimburse you for your trouble. Hope to hear from you, regards,

Tom

Link to comment
https://www.sau.com.au/forums/topic/52594-rb20/#findComment-1052517
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • But first....while I was there, I also swapped across the centre console box for the other style where the AV inputs don't intrude into the (very limited !) space.  Part# was 96926-4GA0A, 284H3-4GA0B, 284H3-4GA0A. (I've already swapped the top 12v socket for a USB bulkhead in this pic, it fit the hole without modification:) Basically to do the console you need to remove the DS and PS side console trim (they slide up and back, held in by clips only) Then remove the back half of the console top trim with the cupholders, pops up, all clips again but be careful at the front as it is pretty flimsy. Then slide the shifter boot down, remove the spring clip, loose it forever somewhere in the car the pull the shift knob off. Remove the tiny plastic piece on DS near "P" and use something thin and long (most screwdrivers won't fit) to push down the interlock and put the shifter down in D for space. There is one screw at the front, then the shifter surround and ashtray lift up. There are 3 or 4 plugs underneath and it is off. Next is the rear cover of the centre console; you need to open the console lid, pop off the trim covering the lid hinge and undo the 2rd screw from the driver's side (the rest all need to come out later so you can do them all now and remove the lid) Then the rear cover unclips (6 clips), start at the top with a trim tool pulling backwards. Once it is off there are 2 screws facing rearwards to remove (need a short phillips for these) and you are done with the rear of the console. There are 4 plugs at the A/V box to unclip Then there are 2 screws at the front of the console, and 2 clips (pull up and back) and the console will come out.
    • So, a bit of a side trip, but one that might be interesting for people with JDM cars and japanese head units. I know @Pac previously posted about a carplay/android auto adapter he installed which used the AUX input, and @V35_Paul put in one of the Tesla style units that replace both screens. The option I went with was a Lsait LLT-YF-VER5.87_2 (https://www.alibaba.com/product-detail/Lsailt-8GB-Android-Multimedia-Interface-for_1601187633672.html). Price was $1,150 for a single unit although they are much cheaper if you are willing to buy 2....$857ea. Make you you get the version 2 not version 1, it is faster and has a better UI - this is the manufacturer listing: http://www.lsailt.com/product/348.html. BTW if you've never bought from Alibaba before, don't be concerned....these guys can't stay in business unless they are responsive, ship fast etc, they were excellent (probably faster shipping than most local places) So, this was my task for a lazy Sat afternoon....looks complex but was all done in a few hours (it probably helps that I had some of it apart before so it was a bit familiar). I also decided to add a HD USB drive recorded at the same time and the unit also supports an aftermarket reverse cam (if you don't want to retain factory) and also AV in and HDMI out It looks much worse than it is, in fact in was genuinely all plug and play (no custom wiring at all). This video was pretty good (skipped a few steps), unfortunately they are an Aussie seller but no longer sell this unit (I guess Carplay/AA adapters are easier to install and much cheaper) https://www.youtube.com/watch?v=T5hJfYOB8Dg
    • That still isn't a lot to go on. I don't have a Y50 Fuga Head Unit wiring diagram. I can say that a lot of nissans of that age shared head unit plugs, so if you are in Australia something like this would probably help: https://aerpro.com/app091# You plug that into the car loom, then either plug the head unit ISO into that (if it has ISO), or you buy and ISO adapter harness that you wire in. Bit of stuffing around, but once you have ISO its easy to change things in future.
    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
×
×
  • Create New...