Jump to content
SAU Community

Recommended Posts

****************** SOLD **********************************

Looking for expressions of interest on the following

This is the Hyperdrive 180sx as seen at Collie and Sydney Drift Nats. Is set up for those who are serious about drifting and the reason for sale is am looking to possibly upgrade to an S14/S15 platform purely for w/shop purposes and future publicity.

180sx 89 manual with Silvia front and the following mods.

RB25DET with GT30 based turbo and hi mount stainless manifold.

Garrett 45mm external gate with screamer

Extreme 9 puck clutch

KandN cone filter with no afm( not reqd with the engine management system)

3in dump and full 3in exhaust with very hiflo cat and twin pipe outlet

Autronic SMC with antilag and rotational idle ( 3k new)

R32 GTS-T radiator with twin 11in thermos

Hybrid style 600x300x75 fmic with stainless piping

GTR fuel pump with upgraded wiring

Turbosmart BOV

Rb20det box

Rebuilt Cusco 1 way LSD

New Teins all round

Adjustable caster rods

5 stud S14 conversion front and rear with R32 GTR 16x8 rims

Cusco adjustable rear top arms

Whiteline adjustable GTR rear sway bar

Whiteline special big dip adjustable front sway bar

Solid rear cradle mounts with no hicas

R32 steering rack, lower control arms and tierods

R32GTS-T 4 piston front calipers and discs

R32GTR front seats

1/2 Safety 21 cage( I think)

Willans full 4 point harness

Omori peak recall oil and water gauges on pillar pod

Factory headup Speedo

Carbon fibre bonnet

Purplish new paint with Black roof

Dark tint windows

No stereo

No aircond

Plus other stuff I have forgotten.

The body is in average cond with some previous accident repair( yes, we all know it was Bangers old car...)but looks good now.

This car is licensed with an RB 20DET and has permits for SOME of the mods.

Comes with std bonnet .

Car is licensed for 5mths

Car has been dynoed at 300rwhp at 15psi and is capable of more with bigger injectors etc.

Price is $17.5K with a new manifold fitted.Price includes a very good rate on continuing development, dyno and driver training for the successful purchaser.

Please realise that this is a loud, hard riding, police attracting drift weapon with an angry idle and a very oversteer orientated demenour that is tons of fun so I would suggest that if you are after something to drive to the shops or boglaps of Northbridge then maybe look elsewhere.

SERIOUS buyers only , please call me at work ( 9209 3100) or pm on this forum. I will post up pics later so don't ask for any to be sent.

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/52606-rb25det-sil80/
Share on other sites

ken, was this car original like a black colour? or was that another sil80 u boys where working on?

Car was originally grey.

The black one was a clients.

Still for sale.

Link to comment
https://www.sau.com.au/forums/topic/52606-rb25det-sil80/#findComment-1046122
Share on other sites

  • 6 months later...
  • 2 weeks later...
  • 2 weeks later...

Yea, what he said above.

Seriously though, the car is still on the market sort of.

The RB25 box was sold to a desperate client but the RB20 box still lives and the new manifold has just arrived today. New teins are fitted and exhaust has been done.

Every time I drive it , I swear I don't want to sell it but the wife is applying pressure as the GTR is due next month :);)

Ring me at work if your serious but I DON'T want a rex, sorry.

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/52606-rb25det-sil80/#findComment-1355405
Share on other sites

  • 1 month later...

Plenty of enquiry but no fold yet.

Surely someone must want a serious drifter that is capable of winning any event in Australia in the right hands.

Even the Jap dude who drove it at Oran park last year ( on HPI 9 ) was well impressed with it.

If I don't sell I may have to sell the GTR instead :) :)

Revised price at top and have added new Teins, Cat back exhaust and 6 mths license.

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/52606-rb25det-sil80/#findComment-1447481
Share on other sites

  • 2 weeks later...
  • 3 weeks later...
  • 1 month later...
Sorry to the people who I told was sold :)

Due to timewaster , is back on the market.

BTW , all stickers have been removed.

Cheers

Ken

Sold and the guy couldn't believe the car was still avaliable.

Cheers

Ken

Link to comment
https://www.sau.com.au/forums/topic/52606-rb25det-sil80/#findComment-1594363
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey Dave, welcome aboard! Good to see another soon-to-be Stagea owner here. The wagons are awesome — plenty of space, still got that Skyline DNA, and loads of potential if you’re into mods. Definitely post up pics when you get it, everyone here loves seeing new builds. What model/year are you looking at?
    • See if you can thermal epoxy a heatsink or two onto it?
    • The other problem was one of those "oh shit we are going to die moments". Basically the high spec Q50s have a full electric steering rack, and the povo ones had a regular hydraulic rack with an electric pump.  So couple of laps into session 5 as I came into turn 2 (big run off now, happily), the dash turned into a christmas tree and the steering became super heavy and I went well off. I assumed it was a tyre failure so limped to the pits, but everything was OK. But....the master warning light was still on so I checked the DTCs and saw – C13E6 “Heat Protection”. Yes, that bloody steering rack computer sitting where the oil cooler should be has its own sensors and error logic, and decided I was using the steering wheel too much. I really appreciated the helpful information in the manual (my bold) POSSIBLE CAUSE • Continuing the overloading steering (Sports driving in the circuit etc,) “DATA MONITOR” >> “C/M TEMPERATURE”. The rise of steering force motor internal temperature caused the protection function to operate. This is not a system malfunction. INSPECTION END So, basically the electric motor in the steering rack got to 150c, and it decided to shut down without warning for my safety. Didn't feel safe. Short term I'll see if I can duct some air to that motor (the engine bay is sealed pretty tight). Long term, depending on how often this happens, I'll look into swapping the povo spec electric/hydraulic rack in. While the rack should be fine the power supply to the pump will be a pain and might be best to deal with it when I add a PDM.
    • And finally, 2 problems I really need to sort.  Firstly as Matt said the auto trans is not happy as it gets hot - I couldn't log the temps but the gauge showed 90o. On the first day I took it out back in Feb, because the coolant was getting hot I never got to any auto trans issues; but on this day by late session 3 and then really clearly in 4 and 5 as it got hotter it just would not shift up. You can hear the issue really clearly at 12:55 and 16:20 on the vid. So the good news is, literally this week Ecutek finally released tuning for the jatco 7 speed. I'll have a chat to Racebox and see what they can do electrically to keep it cooler and to get the gears, if anything. That will likely take some R&D and can only really happen on track as it never gets even warm with road use. I've also picked up some eye wateringly expensive Redline D6 ATF to try, it had the highest viscosity I could find at 100o so we will see if that helps (just waiting for some oil pan gaskets so I can change it properly). If neither of those work I need to remove the coolant/trans interwarmer and the radiator cooler and go to an external cooler....somewhere.....(goodbye washer reservoir?), and if that fails give up on this mad idea and wait for Nissan to release the manual 400R
    • So, what else.... Power. I don't know what it is making because I haven't done a post tune dyno run yet; I will when I get a chance. It was 240rwkw dead stock. Conclusion from the day....it does not need a single kw more until I sort some other stuff. It comes on so hard that I could hear the twin N1 turbos on the R32 crying, and I just can't use what it has around a tight track with the current setup. Brakes. They are perfect. Hit them hard all day and they never felt like having an issue; you can see in the video we were making ground on much lighter cars on better tyres under brakes. They are standard (red sport) calipers, standard size discs in DBA5000 2 piece, Winmax pads and Motul RBF600 fluid, all from Matty at Racebrakes Sydney. Keeping in mind the car is more powerful than my R32 and weighs 1780, he clearly knows his shit. Suspension. This is one of the first areas I need to change. It has electronically controlled dampers from factory, but everything is just way too soft for track work even on the hardest setting (it is nice when hustling on country roads though). In particular it rolls into oversteer mid corner and pitches too much under hard braking so it becomes unstable eg in the turn 1 kink I need to brake early, turn through the kink then brake again so I don't pirouette like an AE86. I need to get some decent shocks with matched springs and sway bars ASAP, even if it is just a v1 setup until I work out a proper race/rally setup later. Tyres. I am running Yoko A052 in 235/45/18 all round, because that was what I could get in approximately the right height on wheels I had in the shed (Rays/Nismo 18x8 off the old Leaf actually!). As track tyres they are pretty poor; I note GTSBoy recently posted a porker comparo video including them where they were about the same as AD09.....that is nothing like a top line track tyre. I'll start getting that sorted but realistically I should get proper sized wheels first (likely 9.5 +38 front and 11 +55 at the rear, so a custom order, and I can't rotate them like the R32), then work out what the best tyre option is. BTW on that, Targa Tas had gone to road tyres instead of semi slicks now so that is a whole other world of choices to sort. Diff. This is the other thing that urgently needs to be addressed. It left massive 1s out of the fish hook all day, even when I was trying not too (you can also hear it reving on the video, and see the RPM rising too fast compared to speed in the data). It has an open diff that Infiniti optimistically called a B-LSD for "Brake Limited Slip Diff". It does good straight line standing start 11s but it is woeful on the track. Nismo seem to make a 2 way for it.
×
×
  • Create New...