Jump to content
SAU Community

Recommended Posts

hey guys.. after doing abit of thread digging, found that my inpurt shaft bearing is stuffed. how did this happen..

well when the clutch is out on idle, it makes an annoying ticking sound from the gearbox. when the clutch is depressed the noise goes away. is this a common problem with r33s

anyway i just want to know if this problem is worth fixing

how much would it roughly costs to fix this input shaft bearing

i had my new clutch installed a couple months ago. hd bb 5puck

and oil changed at the same time. has this got anything to do with the ticking problem i have???

any help thanks

Link to comment
https://www.sau.com.au/forums/topic/5275-ticking-noise/
Share on other sites

I have the same idea as "KamikazeR33" its probebly your cluthrelase bearing thats screwed. if you have the posebility to lift up your car do it and listen. probebly tha problem.

if the bearing thats supports the inputshaft to the gearbox would be f***ed it should sound all the time and you should get a WERY nasty sound when you put your foot down. :D

Link to comment
https://www.sau.com.au/forums/topic/5275-ticking-noise/#findComment-81334
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I’m not sure what happened I told them about sonic tunes free OTS tune and the next the I know .. I was booted..   To funny 
    • Yea - I mean I've seen my fuel pump which is decades old and uh, while I'm not saying this with real knowledge... but I sure get the ick at using anything in the fuel system that produced the state of that pump. Many years ago I went through multiple pumps (and strainers) before I dropped the tank to clean it out with extreme violence. I'm talking the car would do maybe 50km before coming to a halt, which resulted in me cleaning out the filter with some brake cleaner and going on my way. None of my stuff ever looked like what came out of your fuel tank. I don't think I'd be happy with it unless every single component was replaced (or at least checked/cleaned/confirmed to be clean here).
    • I'm not going to recommend an EBC pad. I don't like them. Just about anything else would suit me better. I've been using Intima pads for a while now.
    • Agreed, and in particular the earth strap that should go from the subframe to the chassis but it often broken or left off. There is a section in the R32 workshop manual you can follow for troubleshooting if you don't see anything suspicious, and depending where you are (there is no location on your user profile) you should be able to get your hands on a second hand replacement unit still if needed
    • Yeah they mention as a R34 for 2.5 Turbo...but then again thos "small" were also for R34 by that different site. But i look into it and that 310mm EBC is for R34 GTT. And by those you linked the specs are the same 🙂    EDIT: I found these on one site here: DBA 4000 series T3 DBA42304S They are 310mm...and it says are for R34GTT...are there good? EDIT2: ok they have pads too.  What "color" should i get for street use? I dont want/need some noisy ones...(and if they are not that dusty that is good too)
×
×
  • Create New...