safc installation

[RYanR31]

ok anyone got any instructions, i am fairly competent with electronics so its all good, just need some guidance and or instructions, also does it have base settings for when i install it and i want to drive it to get tuned? or will i blow the bastard up? rb25det by the way

[cameron]

http://www.rs-competition.ru/apexi/

Get it tuned on a dyno to monitor the A/F ratio's and get them around 12.5 under full boost.

[TTT]

If you purchased it NEW, then all settings will be zero and your car should run as it was before..

you just need to make a few selections, like number of cylinders and type of AFM.

then drive it to the tuner..

if you purchased it second hand, the last cars settings will be on it..

once installed, go through the menu's and choose initialize to clear all setting's then do as above for cylinders and AFM

[RYanR31]

ok what series or number AFM is the rb25? in says something about in:01 out:01 or something

[strutto]

1 in 1 out...

Type 4...

[RYanR31]

good work man, any other settings i should know about so it runs like stock? before i get the **** tuned?

[RYanR31]

what you mean by type 4? what is karman? and the hot wire function comes up with sensor calculation and sensor no...

[strutto]

It's a been a while :S

You won't be using karman or pressure...

You'll be using HW sensor no. 4...

[RYanR31]

It's a been a while :S

 

You won't be using karman or pressure...

 

You'll be using HW sensor no. 4...

i select HOTWIRE and it goes to in:01 out:01 then i press next and it goes to sensor cal. which has 01 01 or something..where do i get the NO.4 thing your talkin about..

i installed it and now it runs like a bag of shit..on boost it hesitates, doesnt pull anywhere near as hard and has flat spots. idle and normal driving isnt as bad. what could it be? ive tried 0ing out everything so yea... can someone enlighten me how i can run normal shit..

i cant download the instructions because my computer wont let me view PDF files...so any info would help cheers.

[Sydneykid]

i select HOTWIRE and it goes to in:01 out:01 then i press next and it goes to sensor cal. which has 01 01 or something..where do i get the NO.4 thing your talkin about..

i installed it and now it runs like a bag of shit..on boost it hesitates, doesnt pull anywhere near as hard and has flat spots. idle and normal driving isnt as bad. what could it be? ive tried 0ing out everything so yea... can someone enlighten me how i can run normal shit..

i cant download the instructions because my computer wont let me view PDF files...so any info would help cheers.

What is your email address and I will email you a manual?

[RYanR31]

What is your email address and I will email you a manual?[/quote

[email protected]

thanks dude

[RYanR31]

ok i sorted the instructions out but what i wanna know is i got a SAFC 1 and its got a knock sensor wire and another blue wire in the loom, the knock one is wired up but couldnt find anything about the blue one...the safc 1 doesnt have any function on the knock readings so why does it have the knock sensor wire?

also, that decelerating function. how do i set that up? if i just fiddle around with that function that shouldnt **** up anything should it...

[TIMMMAYYY]

just take it to tilbrooks.

[Cubes]

I'm glad there is a swear filter.

[RYanR31]

**** tilbrooks, if i wanted someone to blow up the **** id do it myself!hehe

[Cubes]

ummm yer.. as I said...

[TIMMMAYYY]

who'd you get the 30det 32 tuned by joel?

[Cubes]

I won't tell unless Ryan stops swearing..

[TIMMMAYYY]

he's young and foolish...give him a break. heh and he bought the SAFC from me, Im suprised it works...

[Cubes]

hahah

Just playing around..

Boostworx.