Jump to content
SAU Community

Recommended Posts

  • Replies 45
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Before Xmas, like way before as I am sure alot of ppl are going away on holidays and don't want to miss out on having there say about the future running of the club, and as for a resturant I don't think that is wise, as I am sure there will be some "raised voices" and why do want to pay to go to a meeting, I suggest someones house with a big yard, and make it a BBQ insted.

Link to comment
https://www.sau.com.au/forums/topic/52997-general-meeting/#findComment-1041715
Share on other sites

:P Good call Ben. Yeah I'm good with any day/night.

I know Gary was going to try to organise something like this for late November?

I think a casual dinner setting is a great idea. A busy restaurant may not like having someone stand up and talk about club stuff at a level in which everyone can hear properly, so might be easier to just have a meeting somewhere where there is sufficient room, kind of private (so we don't disturb other people), and easy to get to.

I would think that a quick run down of the journey up to now by the current exec's would be great, good to show all the members just how much effort went into that time. Also a run down of what issues the club has at the moment and what other things need to be addressed in the future.

It would be really good to have a list of responsibilities for all the exec's and committee members, that way when members do want to contact any of them, they can always go to the right one, rather than having either the buck passed around or getting lost in the system, NOT that this happens at all at the moment! I personally am actually curious to know what is actually involved in carrying out the roles of one of these positions.

Then open up the floor for nominations and voting followed by discussion on direction and suggestions and the motioning/seconding of actions to be taken, as I am sure there are a lot of good people with great suggestions.

From there the new exec's then can go away and have another meeting after that to make a plan of attack for ways to achieve the direction in which the club has decided on going and start to make things happening.

I don't want to sound like too much of a Nazi, but I really think that this should be open to anyone to attend, but the chair to only recognise members of the club for nominations/voting/motioning/etc. That way all those who aren't members yet can get a further insight into what is happening with the club and maybe want to make that step into becoming a member.

Just my two cents worth (ex GST) :)

Link to comment
https://www.sau.com.au/forums/topic/52997-general-meeting/#findComment-1042021
Share on other sites

I don't want to sound like too much of a Nazi, but I really think that this should be open to anyone to attend, but the chair to only recognise members of the club for nominations/voting/motioning/etc. That way all those who aren't members yet can get a further insight into what is happening with the club and maybe want to make that step into becoming a member.

I agree...

I also reckon the option to pay / join on the night and then be involved in the voting, etc would be a good idea... A bit of incentive for those that want their say but haven't joined...

Link to comment
https://www.sau.com.au/forums/topic/52997-general-meeting/#findComment-1042191
Share on other sites

I agree...

 

I also reckon the option to pay / join on the night and then be involved in the voting, etc would be a good idea...  A bit of incentive for those that want their say but haven't joined...

nup,

I don't agree,

join on your own time.

This should be a Club Meeting only.

And should be organised by the current Club President.

Link to comment
https://www.sau.com.au/forums/topic/52997-general-meeting/#findComment-1042326
Share on other sites

this will be a club meeting, but will be open to anyone who wishes to attend. Gary said that.

but when time comes to nominate and vote only financial members will have the right. What if 50 members came who were ready to pay then and there?? thats the cams license in the bag. If they wanna join on the day let them, they have every right to. and for the president organising this?? hahahaha slip hasnt been on for a whilel last time i checked. This has to be done soon, get the new execs and commitee members in and get this thing going.

Link to comment
https://www.sau.com.au/forums/topic/52997-general-meeting/#findComment-1042343
Share on other sites

Why should the power and future direction of the club be decided by those who have all the money? I thought democracy was for all.

So you wouldnt mind if I invited 100 of my mates along, non of which are members, get one to nominate me and then all vote for me?

Hey that really is not too bad an idea, only problem is I dont have that many freinds, although I reckon I could get 100 people to vote me in, if paid the right amount :rolleyes:

JK, but that is exactly my point, then any old bastard off the street with heaps of people voting for him could potentially run the club, I am sorry but I do not want that to happen.

As a paying member I have the right to a say in what happens in the club, I right I do not think should be extended to the general public.

If you want a say, join, only costs like $50 (without the t-shirt) how hard is that?

nup,

I don't agree,

join on your own time.

This should be a Club Meeting only.

And should be organised by the current Club President.

Sorry Mud I dissagree, why not let people attend the meeting, let them see what is going on and be totally open, but they just do not have a say on nominations or voting or anything to do with the club.

Just like parlement, we can go and sit and watch the polies in Canberra, but that doesnt mean we are alowed to make up laws.

If people want to join there and then I would love to encourage them to do so! But they must be members before they can have the right to participate in club votes and the like.

Link to comment
https://www.sau.com.au/forums/topic/52997-general-meeting/#findComment-1042366
Share on other sites

no no no,

you miss understood.

My thoughts

* Anyone can attend.

* It is a meeting only not a membership drive, no joining up on the night (waste of time).

* Only paid members can vote.

* Should be organised and chaired by current president

Link to comment
https://www.sau.com.au/forums/topic/52997-general-meeting/#findComment-1042564
Share on other sites

Sounds good, still think people should be able to join if they wish so before the meeting starts, but yeah it is up to the execs I guess.

And slip does not have access to the internet so how is he supposed to organise this? Chaired yes it is his responcability to do so, but organise, he might need a hand, which is why I think this thread was started for?

Link to comment
https://www.sau.com.au/forums/topic/52997-general-meeting/#findComment-1042604
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, yes, every CU on the bus is available via the Consult port, but whether the scanner you are using is capable of talking to the TCU, the ABS/TCS modules, etc etc, is what is at question here. Many of them are only for engine codes. So, if you have one of those, you won't know if the ABS is having a bitch.
    • That's now. R chassis Skylines come from a time when the tolerance in the ADRs was a bit more....slack. My car, on 235/35-17, which is damn near the exact same size as the original 205/55-16, is pretty much bang on correct indicated speed across the whole legal range. That's demonstrated with constant speed run over 5km, and GPS speed. It's just the luck of the draw. My particular speedo head has to be the thing that is "calibrated" that way, because everything else (the diff ratio, the gearbox and the speedo drive**) are all same same as most other Skylines. **OK, so the speedo drive is a Navara unit to drive the R32's cable, not the electronic unit than an R33/4 would normally have with teh same gear on it. Otherwise, I applaud your OCD tendencies, and I would do the same if I needed to.
    • Not too sure, I believe the Nissan consult port does everything? Also just filled up the reservoir to full and the light is still on. The float seems to move up and down fine.
    • The speedo's can be very conservative, when my Mazda NC MX5 speedo is showing 118kph, the GPS, and a calibrated radar.... cop mate.....hits me at around 110kph +/- 1 or 2 kph, and that is on a 215/45 17, stock tyres size is 205/45 17 as well, so weirdly conservative with stock tyre size When my Commodore speedo red 116kph GPS had me at 110kph on 255/40 17, so again conservative Google says manufacturers need to set the speedo from 4 to 10% slower than actual road speed.....for safety.....and compliance  After doing some offset and clearance measurements to see what can fit the NC on 17x8 +40, without guard rolling or rubbing anything at my current ride height, I've decided that when my tyres are toast, I'm going to fit 225/45 17 and see where that gets me IRT actual speed of my speedo and GPS/radar From the online calculator I should be still be doing around 5kph under an actual 110kph when the speedo is showing 110kph My ADHD requires that when I'm doing 110kph on the speedo, that the actual road speed is actually really close to that, and not alot slower And going from 205 to 225 still keeps the car within the %/mm allowable in the NSW vehicle rules and regulations, which is nice, as long as I'm looking at the latest version that is.....LOL https://www.nsw.gov.au/sites/default/files/2021-02/RMS-13.464-Light-vehicle-modifications-Vehicle-Standards-Information-No-6-November-2013.pdf
    • Take the value it measured as, and pick the closest range available that is above the reading on the screen.   Also, no point just testing the coils. Read what has been said again. You need to test all your wiring, everything.
×
×
  • Create New...