Jump to content
SAU Community

Recommended Posts

Well I'm not planning on lowering it for the time being, I may decide to one day maybe but I have already scraped the front bar comming in and out of some places (they have been a little steep though) and I do take the car on holidays and camping etc so I will probably just fill the guards with wheel size rather than lowering it.

But if the standard Nissan ones will cost more than the Bilsteins (and I'm guessing there is no aftermarket equivilent that are properly valved for Stagea's and not just GTR / GTS-T combo kits) then will the Bilsteins be fine with the standard springs (this may seem like a dumb question, but I'd rather be sure as suspension isn't one of my stronger points :) ).

Thanks again guys.

will the Bilsteins be fine with the standard springs

Yes, I ran mine for several months like that. I used the additional circlip grooves on the Group Buy Bilsteins to lower it, around 24 mm worked OK.

:P cheers :)

I dunno where this belongs

But

Any S chassis or Skyline diferential works in the stagea

I put an S13 differential in my stagea

ALl i had to do was change the input shaft for the driveshaft

and the rear cover

THen just bolt it up

you do need to find shorter bolts for the front two mounts as it will mount directly to your subframe now.

Hi SK,

what if the stock runs out for the blistein for the stagea? Will i be able to get hold of it later on down the road? Say next year?

Also howu much in differnce in price between a whiteline and einach springs? Much difference in performance?

Edited by stasis
  • 3 weeks later...

man im tellin you

my roads suck

like seroiusly dude

we have potholes, dips, crazy inclines everywhere

8/6 in a stagea is great

8/6 is too soft in a 180 to me so it is hella comfy in a car that weighs 1000 lbs more

man im tellin you

my roads suck

like seroiusly dude

we have potholes, dips, crazy inclines everywhere

8/6 in a stagea is great

8/6 is too soft in a 180 to me so it is hella comfy in a car that weighs 1000 lbs more

i hit a bumpy road the other day traveling like 120kph and the car when all over the road!!! The suspension that i have now is JECS. And guess who OWN JECS?! Hitachi!! i think.

But yea i want to know whether with 8/6 will cause the car to go all over the road when it hit bumpy road at high speed?! Thats why Sk set up os very tempting. But the setup that i want is the one with eibach springs which costs like A$2.2k. That will have to wait till i saved up first.

your springs are like 40% of the equation

the shocks are the big thing

no matter what spring rate you have, if your shocks dont haev good bound and rebound dampning its horrible ride

well

tein is a good company becuase their valving and spring rates are more um.....less extreme

their valving isnt as harsh, and spring rates are normally 1-2k lower than other brands.

nope

all it takes is a few items

I tHINK the lower bolt is 19mm on front and rear (i think)

top 2 on the rear are 12mm

top 3 on the front are 14mm

and take it off

(after you take off wheels obviously)

nope

all it takes is a few items

I tHINK the lower bolt is 19mm on front and rear (i think)

top 2 on the rear are 12mm

top 3 on the front are 14mm

and take it off

(after you take off wheels obviously)

ok thanks will try to change the suspension when i get the shocks late next week

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Welcome to my 2004 Toyota Mark ii IR-V Fortuna (series 2) With a 1JZ-GTE powerplant under the bonnet (hood) it'll give me plenty of scope for power upgrades. For those who aren't familiar with imports, the 1JZ-GTE is a 2.5L 6 cylinder VVTi engine with a single turbocharger. This has the factory R154 5 speed gearbox, along with a aftermarket 2 way LSD differential (brand unknown). Under the arches are a set of CST Zero 1 alloys, 18x9 +30 225/40 up front and 18x9.5 +15 265/35 on the rear. The car was quite low in Japan and there's evidence of the wheels catching the rolled arches/fenders. The tyre's aren't great so I'm in two minds whether to replace both or just the tyres and put up with the wider wheels on the rear. The car still uses stock brakes with the addition of some braided hoses. The exterior is stock with the exception of a BN Sports front bumper and a replacement Fortuna grill  Moving to the interior, the steering wheel has been replaced with a dished MOMO steering wheel (which will get swapped for my Momo Tuner for the time being) Defi Link Gauges are mounted above the climate controls and on the A pillar, the Oil Temp,Oil Pressure,Water Temp and Boost gauges should help with spirited and track driving  The stock seats have been replaced with some retrimmed Recaro bucket seats. Being a larger build these are a little snug, unfortunately the orange isn't for me so I'll look into replacing these down the line. Other modifications include a twin plate clutch, Blitz intercooler, Evolve alloy radiator, a stainless exhaust with decat, HKS EVC-S boost controller and coil overs
    • Apologies for the long read My R34 GTT was up for sale at the beginning of spring due to a few repairs creeping up. The strut tops needed replacing, roof and bonnet (hood) painting (yay for 3 stage pearl) and the underside stripped and treated. I sold the car which allowed me to be in a much better place financially. Leading up to the sale I was already thinking about the replacement. In an ideal world it needed to be a good all-rounder. Something I can mess around with, modify, do track days, do the school run, go on long drives etc.  Options included but not limited to... Laurel C35, Evo 8/9, Civic FD2, Impreza Hawkeye, Aristo and even an Audi S4 Avant (I've already got the Mazda 6 wagon). But there was always one car at the top of the list The Toyota Mark ii JZX110 I found an advert on a Facebook group for an example in Japan, from a seller called Jon at Rising Sun Exports. A few messages back and forth and Jon calls me from Yokohama one morning (or afternoon in his case). He briefly explained the import process, the costs involved and a repeat of the advert. After much deliberation, the price was agreed and the sale was locked in. I've never imported a vehicle so I jumped into the unknown head first. The money transfer was completed through wise.com (fees apply), very easy to use and the money was with him within a day or two.  The car suspension was raised for the vessel and the car dropped off at the port. It was 7 weeks later when the bill of lading was received and the freight invoice sent to me, followed by the export certificate a couple of days after (both digital copies) In the mean time the port had been in contact. I needed an agent to deal with the NOVA (notification of vehicle arrival) along with the tax/duty invoice, this was £75.00. The port also had a fee of £100, I'm guessing to cover the cost of the 10 day 'free storage' and for moving the car off the boat etc. They need a copy of the vehicle invoice, freight invoice and export certificate to allow the vehicle to pass through customs. The vessel arrived on Tuesday 5th August, the tax/duty invoice was generated and sent over. This is generally tax 20% and duty 10% of the vehicle value. Although the invoice came in at a higher amount than I had calculated. Once HMRC had received the payment the vehicle could be released from customs. I thought once the tax/duty was paid you could collect at any point, that's not the case. Your agent will need to book a collection slot, I requested Thursday 7th which was accepted, with a 9:00am slot allocated. It was a 5:00am start from Norfolk heading to Southampton. We eventually found the compound, upon presenting the bill of lading and some ID they released the car (they drove it out of the compound to the front ready for us to load up). The email from the port stated each slot had a 10 minute window, which seemed abit farfetched but the staff said it's not a strict rule. We were there for approx. 30-40 mins in total. A week prior to collecting I contacted my garage and explained the situation, I was able to get an inspection slot that afternoon. For the registration, DVLA require the car to be insured, for this I used a company called Adrian Flux who can insure the vehicle using the VIN number. 
    • Hey guys, looking for these side skirts if anyone can help me out. 
    • Wife and I are still looking for a new home. One condition was a large enough garage for a full-size lift in one bay. Now if only we could find something... We've been looking for almost a year now.
    • Thanks everyone for the ideas! Sadly, ramps are a no go for me. With young kids at home, I do most of my work late at night while they're sleeping. Starting the car multiple times wouldn't be a great idea.  I'll go see one of those new long reach low profile jacks and take a couple measurements to see if they will fit.   
×
×
  • Create New...