Jump to content
SAU Community

Recommended Posts

Hi All I have just recived a letter from the EPA telling me to take my car down now all i wanna know is how hard do they go over the car the epa is for the blow off valve which is a GFB stealth one which is plumb back but u can make it atmo so would they get me on that and also my blitz id3 boost control now i have disconected the control computer but all the stuff for it is still under the bonnet so would they get me on that can ppl that have had experience with the EPA let me know what to expect as this is my first time going thanks

Link to comment
https://www.sau.com.au/forums/topic/53410-how-bad-are-the-epa/
Share on other sites

I have to take it to some where in mcloud were ever that is its past preston apprently i think that might be the epa station i know that they will check boost conrtol and blow off valve how bad are they should i just take the blow off valve off even thoe its plumback ?

I have to take it to some where in mcloud were ever that is its past preston apprently i think that might be the epa station i know that they will check boost conrtol and blow off valve how bad are they should i just take the blow off valve off even thoe its plumback ?

If it's not your factory BOV, take it off and put it back on after inspection. Be careful not to discuss any modifications you have done, in particular boost control, fuel computers, ECU's, etc. They will happily sit there listening to you tell them all about it acting very casual, and then they will whack an EPA notice on your car giving you 30 days to return the car to stock or have a full emissions test done, or they will instruct VicRoads to cancel or suspend your car's registration. EPA have quite alot of authority, and VicRoads will follow whatever the EPA tell them. They can be total bureaucratic pricks.

I just got a letter from the epa for exhaust noise, went to a epa approved tester and it was hassle free. took about 10 mins. they rev'ed the car to 5000rpm and it recorded a 88db reading, they cleared it and all I need to do is sent a letter to the epa.

although this isn't what you got dicked for it might be usefull info.

personally if I had the gofastbits stealth bov on I'd leave it on as it plumb back and you only change it when your at the track :D

The BOV is on plumback but i mean you can't tell the cop that he didn't belive me i reved it and all no noise and still i have to go to epa thanks for all the info i won't be telling them anything about my car but it is basicly stock except for thoes two things !!! they just wanna make me go out of my way i think they pick the most futherst EPA place i could go too !!! has any one else had a letter from the EPA lately it tooks like a PARTY invertation

When you go there act like you dont know anything about the car if they ask your something and saw you bough it recently like that.

If you have a sister/gfriend relo take them with you and tell them to stand outside the car and make chitchat with the tester, this usually distracts them a little and they dont check everything properly :P

With regards to your stealth BOV, give them a call first it will save you a return trip. Explain to them the function of your bov and they will tell you whether you need the stock one put on or not. If you have a stock BOV handy throw it on to save hassle.

With your boost controller, you may get away with having the electronic part still mounted in your car and the wires going through to the engine bay - explain to them that it was expensive to install and its a hassle to take it out all the wiring etc. You will need to remove the boost solenoid and restore the stock plumbing & connect stock boost solenoid. If your lucky your boost controller electronic unit can be disconnected from all the pipes etc so you can just leave the wires/pipes tucked away. Best bet is to whip it all out.

Exhaust emissions - make sure you have a working O2 sensor, an intact cat.

Exhaust dB test - throw on a stock cat back. Stock cat and stock cat back exhaust clocked 85db on my car. limit is 90.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...