Jump to content
SAU Community

HELP A.S.A.P Is R34 GTT and R33 GTS-T rear suspension compatible?

adznight
 Share

Recommended Posts

NJR 34GTT Proficient

NJR 34GTT

Posted
Posted

I believe 33 GT-R suspension is the same not GTS-T. There was a thread about this elsewhere with someone with a GTX trying to upgrade his and he checked and confirmed that 33 GT-R suspension is the same.

Sounds like you hit a gutter? :D

Sydneykid Grand Master

Sydneykid

Posted
Posted
Hi, I'v suffered some suspension damage on my GTT and need to source parts ASAP. I've located some GTT parts in Vic but was told that R33 GTS-T parts are compatible, can anyone confim this for me? Thank you VERY much for your help :D

 

Parts I need are -  

 

Upper controll arm

Lower controll arm

HICAS controll arm

 

Might need -  

 

Axel

Stub and Hub (doubt it)

R34 GTT is the same rear suspension as R33GTR.

R33 GTST will not fit, for example the rear shocks on the R34 GTT have a fork at the bottom whereas the R33 GTST has a bush at the bottom (sounds like a girl I knew once).

Get R33 GTR bits for the R34 GTT and you will be OK.:D

adznight Newbie

adznight

Posted
  • Author
Posted

OK, some good news for all you GTT owners. The R34 GTT shares common suspension components with the S15 200SX. The lower conroll arms are the same, not sure about the rest but compare these prices!

Motor wrecker -

Lower control arm - $375

HICAS end rod - $330

Nissan Ferntree Gully -

Lower control Arm - $ 262.60

HICAS end rod - $ 110.20

Go figure.....the lesson here, make sure you check retail prices before buying from a wrecker. GTT's wrecks being a little more rare tend to attract higher prices as wreckers think that most buyers will be desperate or they simply don't know the prices and just pluck them from their behinds!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      I guess one thing that might be wrong is the manifold pressure.  It is a constant -5.9 and never moves even under 100% throttle and load.  I would expect it to atleast go to 0 correct?  It's doing this with the OEM MAP as well as the ECU vacuum sensor. When trying to tune the base map under load the crosshairs only climb vertically with RPM, but always in the -5.9 column.
    • CF.Panda
      R34 25GT Engine Light 21

      By CF.Panda · Posted

      AHHHH gotchaa, I'll do that once I am home again. I tried doing the harness with the multimeter but it seems the car needed a jump, there was no power when it was in the "ON" position. Not sure if I should use car battery jump starter or if its because the stuff that has been disconnect the car just does send power.
    • Haggerty
      RB25DE NEO with Haltech ECU

      By Haggerty · Posted

      As far as I can tell I have everything properly set in the Haltech software for engine size, injector data, all sensors seem to be reporting proper numbers.  If I change any injector details it doesnt run right.    Changing the base map is having the biggest change in response, im not sure how people are saying it doesnt really matter.  I'm guessing under normal conditions the ECU is able to self adjust and keep everything smooth.   Right now my best performance is happening by lowering the base map just enough to where the ECU us doing short term cut of about 45% to reach the target Lambda of 14.7.  That way when I start putting load on it still has high enough fuel map to not be so lean.  After 2500 rpm I raised the base map to what would be really rich at no load, but still helps with the lean spots on load.  I figure I don't have much reason to be above 2500rpm with no load.  When watching other videos it seems their target is reached much faster than mine.  Mine takes forever to adjust and reach the target. My next few days will be spent making sure timing is good, it was running fine before doing the ECU and DBW swap, but want to verify.  I'll also probably swap in the new injectors I bought as well as a walbro 255 pump.  
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      It would be different if the sealant hadn't started to peel up with gaps in the glue about ~6cm and bigger in some areas. I would much prefer not having to do the work take them off the car . However, the filler the owner put in the roof rack mount cavities has shrunk and begun to crack on the rail delete panels. I cant trust that to hold off moisture ingress especially where I live. Not only that but I have faded paint on as well as on either side of these panels, so they would need to come off to give the roofline a proper respray. My goal is to get in there and put a healthy amount of epoxy instead of panel filler/bog and potentially skin with carbon fiber. I have 2 spare rolls from an old motorcycle fairing project from a few years back and I think it'd be a nice touch on a black stag.  I've seen some threads where people replace their roof rack delete with a welded in sheet metal part. But has anyone re-worked the roof rails themselves? It seems like there is a lot of volume there to add in some threads and maybe a keyway for a quick(er) release roof rack system. Not afraid to mill something out if I have to. It would be cool to have a cross bar only setup. That way I can keep the sleek roofline that would accept a couple bolts to gain back that extra utility  3D print some snazzy covers to hide the threaded section to be thorough and keep things covered when not using the rack. 
    • GTSBoy
      R34 Handbrake light saying ON and intermittently flashing

      By GTSBoy · Posted

      Probably not. A workshop grade scantool is my go to for proper Consult interrogation. Any workshop grade tool should do it. Just go to a workshop.
×
×
  • Create New...