Jump to content
SAU Community

Recommended Posts

R33 fitment is IDENTICAL to AU (and BA I think) Falcon, and no doubt plenty of others. 5x114.3, +20 offset iirc. Ford steelies are common on the back of Nissans at the drags, and R33 wheels are common fitment on R32s, same goes for 34 wheels on 33s and 180SXs etc. They will bolt up, but I'd be checking guard clearances on GTSt's on the front. It might be OK, but I'd be checking it anyway ;)

Are they your new mags in the background? :/

The Guy I Brought Them Off Had Them On A 32 Gtr He Said You Will Have To Change The Back Tyres 255/35 To The Same Size As The Front 235/40 As The Torque Settings On The Car Will Be All Over The Shop, If You Have The Same Tyres All Around You Possibly Could Get Away Using Them On A Gtr, But You Really Have To Use Same Width Wheels On A 4wd Car...

R33 fitment is IDENTICAL to AU (and BA I think) Falcon, and no doubt plenty of others. 5x114.3, +20 offset iirc. Ford steelies are common on the back of Nissans at the drags, and R33 wheels are common fitment on R32s, same goes for 34 wheels on 33s and 180SXs etc. They will bolt up, but I'd be checking guard clearances on GTSt's on the front. It might be OK, but I'd be checking it anyway ;)

Are they your new mags in the background? :/

YEAH MATE 13INCH HUBCAPS..

The Guy I Brought Them Off Had Them On A 32 Gtr He Said You Will Have To Change The Back Tyres 255/35 To The Same Size As The Front 235/40 As The Torque Settings On The Car Will Be All Over The Shop, If You Have The Same Tyres All Around You Possibly Could Get Away Using Them On A Gtr, But You Really Have To Use Same Width Wheels On A 4wd Car...

you dont have to really use all the same width all the way around, cause the car isnt constant 4wd, its 2wd most of your driving even while your franging it, its only why your rear slips that the front cut in,so it doesnt make a differce I drive on 285 rear and 245 front with now problems.

you dont have to really use all the same width all the way around, cause the car isnt constant 4wd, its 2wd most of your driving even while your franging it, its only why your rear slips that the front cut in,so it doesnt make a differce I drive on 285 rear and 245 front with now problems.

up to you wreckedhead i had a thread up a regarding this and i was told if i keep the wheels on i will end up stuffing the tranfer case clutch...

up to you wreckedhead i had a thread up a regarding this and i was told if i keep the wheels on i will end up stuffing the tranfer case clutch...

never heard that befor but anything is possible. all my mates are mechanics and some specialise in gearboxs, i can give you a number so you can find out personally if it will stuff the box/clutch

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...