Jump to content
SAU Community

Recommended Posts

im looking into getting an apexi power fc and commander for my r33 gtst. Just wondereing if any one could give me some tips on what else I should be doing if I install it. (ie- air flow meter, tuning etc)

also an estimate on the price for this system and some links to some suppliers would be great.

:werd:

Link to comment
https://www.sau.com.au/forums/topic/54302-upgrading-to-power-fc-need-advise/
Share on other sites

I have a Power FC in my r33 GTR w/ hand controller. It's just a plug and play system. No additional wiring has to be done. In my Opinion they are a top choice. The Power FC is about 1500, the hand controller about 600. Noting has too be changed (e.g Airflow meters).

Something that i think is also great is the boost controler for it. it can be adjusted with the hand controller and ur boost lever can be moitored with the hand con/. Like Gav said its best if the Power FC is installed and Dyno d as son as posible.

http://www.apexi.com.au/

UAS have some prices

Thanx for the responses.

I have managed to track one down for $1300 (brand new with 12 month warranty) with commander- it is in english format and ready to be shipped. Is this a good deal?

I found it through an advertisement in SAU - here is the site for anyone that is interested.

www.JapaneseImportParts.com

Has any one heard of these guys? Are they reputable?

Does this mean i wouldnt need a boost control or boost gauge?

Do I need anything else apart from the PFC and commander for boosting?

Something that i think is also great is the boost controler for it. it can be adjusted with the hand controller and ur boost lever can be moitored with the hand con/. Like Gav said its best if the Power FC is installed and Dyno d as son as posible.  

http://www.apexi.com.au/

UAS have some prices

If customs dont get it your fine.
I remember reading on here about 3mths ago that Mr Nengun himself said that replacement ECU's are classed as "(something)" which doesn't incur any import taxes.
I have a Power FC in my r33 GTR w/ hand controller. It's just a plug and play system. No additional wiring has to be done. In my Opinion they are a top choice. The Power FC is about 1500, the hand controller about 600. Noting has too be changed (e.g Airflow meters).

dosnt the gtr have different AFM to the gtst? If so, would I have to change my AFM on the gtst(r33)??

Make sure you buy one and quote your make and model of car.

THEY ARE CAR SPECIFIC.

He would have one specifically for the R33 GTR as i have a different one for my R33 GTS-T.

They are NOT interchangable so as long as you order the one for your car, you will be fine. www.nengun.com has been used by heaps of people on these forums, do a search and you will see. Very cheap and comes with warranty.

No offence, but you sound like a bit of a newby (me too) so i wouldn't bother with an electronic boost controller just yet. But hey, if your cashed up, go for it.

My goal at the moment is to have the Power FC installed and tuned with the front mount intercooler, a bleeder-boost-controller set to 11psi and my current exhause mods.

Very common setup. Go for that. Probably very close to the 200 rwkws.

I am aware that they are car specific-thnx.

Yeh - im fairly new to modifying performance cars.

Ive actually got a gtst, bought it about 7 months ago totally stock except for the rims.

mods so far

- turbo back stainless 3" with highflow stainless cat and 4.5" canon

- hks pod filter

- hks sequential BOV

- front strut brace

- ebc bluestuffs(fr & bck)

- timer.

Ive got a front mount ready to go on but I would like to install the power fc and boost control (I beleive when you lift the boost it is recommended to upgrade the head gasket also- is that so?)

and oil catch tank all at the same time as well as tuning. Be good to get the dyno result!

Later on I'll upgrade the turbo, injectors, fuel pump, oil cooler, coil overs, bars/bushes then maybe I'll do the internals.

There's no reason you can't do the front mount straight away.

Grab a bleeder valve fro $100 and do that whenever aswell.

Just make sure you install and tune the FC last, or at least at the same time as everything else.

Because the first time you install it you will be up for a $400-$600 tune, not advised to drive it without it being tuned.

If you LATER install the FC and or Boost ctrl, you will need to get it dyno tuned again.

My Power FC is currently collecting dust under the bed untill i get the front mount done.

Literally! Gotta get my act together :P

mods so far  

- turbo back stainless 3" with highflow stainless cat and  4.5" canon  

Do your front/dump pipes before the PowerFC.

(I beleive when you lift the boost it is recommended to upgrade the head gasket also- is that so?)
Certainly incorrect.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have been being VERY quiet about what you're alluding to, as it is something that ticks me off... The number of cars from factory that run coil overs is HUGE! Most of them these days do... The other part that annoys me, is people saying "Well all the incabin adjustable suspension is illegal by blah blah blah"... If that's the case, then why can I buy a car brand new that can do it if, FULL STOP in cabin adjustable suspension is illegal...   Also, I could just chuck some aftermarket shocks in my car, throw the stock springs on, after my blue slip, dump my super low springs back in. Same shock and spring style setup... Hell, they could also be the same colour springs etc.     I'm voting, BlueSlipper didn't want to touch the above car for some reason. Whether it be some sort of bias against the car, the owner, them maybe having previously done dodgy shit and now they're being super careful in case they get slapped in the face by the Gumbyment again... Find a new blueslip place.   And can confirm as you had said, yes there are holy bibles of vehicle heights, and all sorts of other suspension stuff. Heck your run of the mill mechanic, and tyre shop has access to all of that stuff. It's how they do wheel alignments...
    • Funny story Heading to Sydney this morning on the HWY there was some slow traffic, so I gave it the beans and midway through my overtaking "power run" I lost all power It seems that I missed a hose clamp,  and the MAF and filter went WiFi To make this more problematic, the little tool kit that lives in the boot, is sitting in the sun room at Goulburn......LOL Luckily for me I found a bit of steel on the side of the road that could be used like a rusty and bent flat head screw driver to tighten it up enough that it got me into Sydney, it is now all tight like a tiger with the aid of a 8mm socket Note to self: Use my brain and double check stuff, and always keep that little tool kit in the car for when I have a brain fart
    • Oh, and as for everyone with their fuel economy changes, I switch between E10 and 98 in the company car. Even do when I had personal cars that could run on E10. You know what changed my fuel economy in any noticeable way? How I drove, and where I drove. Otherwise, say on full tanks of just back and forth from work only (So same trips, same sort of traffic), couldn't notice a difference that I can correlate to the type of fuel in use. In the current vehicle, that's over 42L of USABLE fuel. While 98 is all "more energy dense", it also has higher knock resistance as it takes more energy to get it to ignite too. The longer hydrocarbons, typically more tightly bound. So running the same ignition map, can also produce less power, if there isn't enough time to get it all burnt through properly, as yep, the flame propagation speed is different from lower octane fuel to higher (Higher has a lower flame propagation, due to the more tightly bound and harder to self ignite funs. This is also typically where, a vehicle that is designed purely to run on 91 (Whether it be E10 or normal 91) usually sees absolutely no real world difference in fuel economy for the normal man, woman, or dog.
    • We've got some servos around me that have 91 with E10, 91 (no E10), 95, and 98. At those stations the change from 91 E10 to 91, is typically around 8c/L.   But lets not get started on the price of fuel in Oz. It's ridiculous. All the service stations around me, bar one, the price of fuel has been over the $2 mark per litre for the cheapest, 98 being around $2.45. That one service station is a CostCo, fuel from it comes from the same refineries, and makes no pitstops, it runs great, including the 98. In fact, I've had no issues on CostCo fuel, but plenty of issues at other stations!. The CostCo fuel, was $1.65 roughly this week for 94 with E10. $1.88 for 98. Servos directly across from it, $2.10 for 91 E10, and $2.48 for 98. The part I had to laugh at? If I drive multiple HOURS away from Brisbane, say out near Nanango, or Kingaroy, or even out to Goondiwindi, the price of their fuel, is the same as what it is at the CostCo... Oh, and that BP servo at Goondiwindi is HUGE and goes through epic turnover of fuel, so it's not sitting there for weeks going to shit. And what blows me away, my mate is one of the people who drives the Fuel Tanker all around QLD, delivering to all those places. At the same company his previous role was doing the "local haul" deliveries... Same truck, same driver, same pickup point it all comes from. So you tell me, how the hell it is 60c/L CHEAPER for fuel, when nearly all else is equal, except they require a B-Double to drive half a day out of Brisbane, and half a day back, every second day, compared to the delivery that can be under 30 minutes drive from the fuel pickup point... Not to mention, go five blocks down the road, and Ampol to Ampol will vary 30c/L... And I've had this conversation with my mate... The way it's priced, is just typical, pure and utter rubbish... He also does runs from Brisbane, to all over QLD, down to Newcastle, Sydney, Nowra, Melbourne, Geelong, and even out to parts of the NT depending on the companies needs. His main stuff is all the longer distance away from home for a few days at a time, then when he's back, he loves to just pickup extra shifts wherever he can in whichever truck, hence all the weird different places.   Oh, as for getting E10 into all the fuels in Australia... It was very quickly highlighted, that we don't have enough biomass available to use to make E10 sustainably like they require, and it would dramatically cut into our, and the worlds food chain supply...   I vote we all just start running on liquid methane gas... Plenty of that just getting tapped off at tips from underground decay... (Note, this is pure just stupid commenting. I could very easily highlight the reasons its not a good idea especially on scale...)
    • Am I correct in assuming that the R35's are getting the classic skyline haircut off the odometer?  Quick search on carsales, there are 33 08 and 09 GTR's for sale, only 2 of them have more then 100,000km's on them (116,075 and 110,000 respectively).  And somehow there are about 25 for sale with around 60,000kms? Looks like the classic skyline haircut to me =/
×
×
  • Create New...