Jump to content
SAU Community

Recommended Posts

Maybe this should go in the wasteland section, but here goes:

I'm thinking of getting my car rebuilt with a detuned motor, I've got 300rwkw at the moment and am hoping for 70rwkw when I'm finished.

Any ideas??????????

I thought a small turbo from an exa pulsar, and a new 4 pack of coils might be a start [leave two cylinders with nil spark].

PS this is a mental role reversal of what everyone [inc. me] posts. :alien:

Link to comment
https://www.sau.com.au/forums/topic/54619-skyline-performance/
Share on other sites

C'mon Lukas, a lawn mower is way too dangerous.

I was actually after some lateral thinkers to come up with viable alternatives.

Mind you if I could remove the injection setup and go back to carbie, I reckon a lawnmower carbie would be a good thought.

Tah, leech, maybe 70kw is too much, don't want to attract the cops ya know..........

Imagine their dials when they open up the bonnet and shes got a 1" pipe, and sr20 with a lawnmower carbie.

Love the fiat motor idea, nil performance and f#@ked reliability. It doesn't get any better.

Oil chewin', oil spewin', spagg/rice machine.

Will a fiat motor fit in a 'line , don't want a crowded engine bay, it has to breathe. Think I'll get a couple of those flame throwers they advertised in Unique Cars for $165.

Jay, good idea, bit worried about the lack of pollution though, sounds a bit clean and green.

But i reckon RTA/cops would end up in Parkview, fully mental and dribblin'...............

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Man, different parts but the same numbers is terrible @dbm7! And it doesn't help that most online shops don't list the part numbers at all. They just give a list of compatible models...
    • Slow when hot could also be because its getting more dynamic compression, OR things are getting a bit tighter once it is all expanded. If it were an earthing issue, typically I'd expect you to have it have issues all the time. Unless it's really a combination of both things. Where the higher compression, and things being a bit tighter, is giving that bit of extra load and you do need a slight clean up on the cables/connections.
    • Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
    • I don't know for sure, but I'd expect them all to be interchangeable given the diff end and hub end don't move/change between any C34 series. Often Nissan will change part numbers and the aftermarket follows those year ranges; but the original part number change doesn't mean other parts won't fit. The change could be a change in material, internal parts or even just supplier. For example, all the RB gearbox to engine bolts are no longer available and there is a new part number instead. The only change is they went from cadmium plated bolts to zinc plated due to the issues manufacturing with Cadmium. They look different but work the same.
    • One year is a bit concerning. Did you try contacting GSP? It says 5 year warranty on the box if I remember correctly. I'm also running their driveshafts on my S2 Stagea.   You could check the part numbers on Amayama for your year. Here's the link for my 1998 which gives the 39100-23U60 part number. Well, that and 39100-23U70. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/trans/391 What does it say for yours?
×
×
  • Create New...