Jump to content
SAU Community

Power FC vs. the rest

SLY33

By SLY33,
in Engines & Forced Induction

 Share

Recommended Posts

matlowth Proficient

matlowth

Posted
Posted

Oh - and btw - When you've got a really modified motor (like mine), you're right - most of the maps do need to be fiddled with.

Although - most of it you can fix by playing with the air flow trim...

We plugged a wide band lambda sensor into my exhaust and drove my car around for a cpl of hours to get my part throttle stuff nice and lean... 14.0 @ cruise at 60->110. So if I'm not giving it stick, it's still fairly good on the gas.

What's your power delivery like? Have you got a dyno graph at all?

Cheers,

matt

Originally posted by Merli

I can tell it you takes a LONG time :)  

I had two PowerFCs, and I copied *ALL* settings from one PowerFC to the other for troubleshooting... I got out the laptop, and fired up Excel :(

I sat there for three hours with my cousin reading out every single point on both ignition and fuel maps, as well as all other settings in the PFC...

I was ready to kill someone after doing that... ARGH!!!

Then I had to plug in the other PowerFC and copy all the data in the spreadsheet into the new PowerFC, which took even longer... About 4 hours....

Worst thing was, that there was nothing wrong with the original PowerFC, so all that was done in vain :)

matlowth (matt1) & whatsisname (matt2), have you guys got webpages up with your mods and photos of your cars? It's good to see other more *properly* modified R33 GTS-ts running around... Pity we all live in different cities! :(

Here's mine: actually I don't want everyone knowing my car... I'll PM you guys the URL

edit: Mine is the white one obviously... Don't mind the GTR badges, they're there to cover screw holes from the previous owner until I can source a new bootlid :)

  • Replies 64
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

whatsisname Grand Master

whatsisname

Posted
Posted
Originally posted by Merli

matlowth (matt1) & whatsisname (matt2), have you guys got webpages up with your mods and photos of your cars? It's good to see other more *properly* modified R33 GTS-ts running around... Pity we all live in different cities! :P

Here's mine: actually I don't want everyone knowing my car... I'll PM you guys the URL :)

I must've missed your URL?

No mate I don't have a webpage. I'll get around to setting one up one day.

There's actually quite a few well set up GTS25t's, it's just that most of them you never read/see about.

mightymax,

Sorry to hear of your Microtech woes. Lucky for me I haven't experienced any of your dramas in the months I've been up & running with the LT12.

Sly (Allan),

G'day mate. Yeah sure I'd be happy to go for a drive :D provided it's dry!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Kinkstaah · Posted

      Hey, it's me! Though honestly, if I had 20M in my bank account tomorrow, I would not want to be rid of my car all of the sudden - Which makes me think this is money stuff, not "I actually hate car" stuff. I'd probably double down and buy even more trinkets and fun things for it. If this is not you, then sell it cheaper. It will sell at a certain price after all.
    • Kinkstaah
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By Kinkstaah · Posted

      Of course it would be - But you shouldn't be here.
    • GTSBoy
      Hiya!

      By GTSBoy · Posted

      This is the LCA mount reloctaion kit. Self explanatory in its description. https://au.gktech.com/products/s13-180sx-r32-subframe-anti-squat-reduction-weld-in-kit?_pos=62&_fid=1e812d392&_ss=c These are the alloy subframe bush inserts that I am using. I like them. https://au.gktech.com/products/rear-subframe-slip-in-collars?_pos=29&_fid=1e812d392&_ss=c Alternatively, if you have original and shitty bushes, you might consider outright replacement with poly. https://au.gktech.com/products/polyurethane-rear-subframe-bushes?_pos=28&_fid=1e812d392&_ss=c I would also higly recommend that you look into adjustable RUCAs and tension rods, so you can sort out the camber and bump steer behaviour, especially if the car will be any more than ~15mm lower than stock. I would also highly recommend the GKTech FUCAs, although you really should do some research and learning on the subjetc of R32 FUCAs before making any decisions. All of this will be criticaly difficult to get through a TÜV inspection too, if that happens to be relevant to you. Note that if you do install the relocation kit, you will absolutely have to replace the associated bushes with spherical joints (you can read all about that on the product page) or upgrade the LCAs also.
    • Milkmun
      Does the r33 have a cabin filter?

      By Milkmun · Posted

      None on 33s.
    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      I picked up my block and head last week and have been slowly assembling it since then. Pictures I took earlier this week. The rest of the auxiliaries are on now. I just have my intake manifold runners to tap for my WMI direct port setup before putting it back on. I should hopefully have the motor back in by this weekend.   
×
×
  • Create New...