Jump to content
SAU Community

Recommended Posts

  • Replies 57
  • Created
  • Last Reply

Top Posters In This Topic

I was reading a write up on a comparison on the GT2530(I think) and the GT-RS in zoom I think it was, was a very goof read. I'll scan it in and post it if anyone was keen to have a look?

 

The end result was that although the GT-RS lacked a little bit in top end the mid range response was awesome. It was picked over the GT2530 but price is a bit of a turn off.

Could you send me a scan of this article. I'm very interested in the GT-RS turbo but now I wonder.

Thanks

I have been doing some research, and it LOOKS to me based on the comments throughout here on GT2530s etc that a TD05-big 16G from a Mitsubishi EVO3 (and some others) would do a similar job.

I think with many of the turbos designed for 2L 4cyl they would make a noticeable amount less on the RB25.. If you could get it rebuilt to more suitable A/R ratios and the like could be an idea though, esp if you're getting it for dirt cheap.

I have been looking at the GT-RS .. at $2500 for a "full kit" (+ taxes etc) its worth thinking about. I am not sure whether i want massive HP numbers to start with on a stock bottom end, and that looks like it fits the bill.

So consensus is around 240rwkw or so with a nice broad powerband? A dyno graph for rb25 would be very nice to see :)

Thought the gtrs was a bigger turbo - people seem to be getting more power from these than 2835??!!

strictly speaking, 2835 is a 400ps rated turbo, exactly the same as GT-RS.

Its the 2835Pro and 2835R that have the 420ps rating. Hence more power from the 2835Pro's that people such as grepin (287rwkw?) are getting. I think that was at 1.2 bar. So far ive heard a GTRS pull 250rwkw at 1bar, so they arent too far apart.

Hi guys late post.I got this quote from www.horsepowerinabox.com

I can do the GT2535 in the T3 flange internal gated for $1750, but not the

GT2530.

We also do a 500hp core unit with a .70 comp cover for the RB25 as a bolt on

Internal gate for $2150.

Regards

Do any of you know the garret gt2535 turbo's housing specs.Are they the same as HKS?

I also found a link to a site where HKS is compared to garret. clickey

lol dyno was at the wheels of course.........

mods are just the usual bolt ons so far

HKS gt-rs turbo

HKS 550 ccinjectors

greddy plenum

HKS fuel pump

splitfire coils

apexi power fc

HKS silent hiper exhaust

HKS type S intercooler

HKS evc

HKS metal flow

HKS sqv

HKS iridium plugs

few other bits and peices no internals yet so could pull more power easily....

There is a mountain of "garrett" vs "HKS" discussion in this very forum... its amazing

Do You guys know if garrett turbos are rated in ps atw or ate(at the engine)??Likewise with HKS.

pretty much all the turbos I know rate at the engine.. its only rough anyhow.. too many factors can vary it around.

Least you know the HKS is going to come out of the box working :D

lol dyno was at the wheels of course.........

mods are just the usual bolt ons so far

HKS gt-rs turbo

HKS 550 ccinjectors

greddy plenum

HKS fuel pump

splitfire coils

apexi power fc

HKS silent hiper exhaust

HKS type S intercooler

HKS evc

HKS metal flow

HKS sqv

HKS iridium plugs

few other bits and peices no internals yet so could pull more power easily....

NICE:)...all done at BD4s?...i bet Paul loves you:)

SAS have a good name around the traps of not leaning on engines too hard, and dyno figures being on the money...so very nice results with what should be a strong reliable combo:thumbsup:

Last question...what boost is it running to make that power and where is boost pressure being measured?

LOL...if you own an RB25:(

Yeh Paul is a tope bloke, runs a tight ship:thumbsup:...shame he hasnt gone crazy with the R34 yet:(

Yet is the word the big t51r sittin there waitin to go on..i went it for a spin it the other day to see how the shocks went....drooled the whole ride :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • For fuelling the Haltechs have O2WB fuel controllers. Very useful for helping tuning VE and correcting for *small* mistakes. Of course if your injector/cam/trigger/sensor data is just wrong (or for a GTT which is not a GT) then you will get impossible reactions to things. I am sure you know this already but the reason people don't typically put haltechs (or any Aftermarket ECU) on GT's is because there's practically no real gains to be had - So this knowledge won't be commonplace.
    • Can someone tell me if the cracks seen in the rear sway bar bushings in these photo's is unacceptable from a roadworthy point of view?  
    • Shouldn't need a "base map" for anything other than guidance to ignition tuning. You just need the engine capacity right, the injector size right, and something, almost anything, for a VE map. On an NA engine, fuelling is almost completely a function of load signal & rpm. It should run and drive with a completely flat fuel map. It will be too lean under load, but that's easily fixed. We used to tune all ECUs without any base map. There were no such things (until someone had tuned a near stock engine on one, and then they had a "base map".
    • What did you actually buy/how much did it cost? When I got mine in like.. 2017...? 2019? the aim was to run Torque for gauges via ODB2 and things like Track Addict/Laptimers/Dashcam/Reversecam/Spotify etc. Mine never broke, but I wonder if you've got the same needs (it sounds like it). Cause I liked the idea of being able to do anything with it. That said, yours also cost 3x the cost of what I spent so... food for thought.  
    • For me there is a massive difference in manufacturer or big brand crippled android (Sony, Kenwood etc) vs the sort of thing I've installed here, which is basically just a tablet in DIN form factor with open Android, and the other model of course is mirroring - Android Auto/Carplay. I hate the locked down manufacturer and AA options where they decide what apps I'm allowed to install, including the Launcher but also importantly things like Ecutek (for this car) or Real Dash (Stagea) are not supported. Plus those crippled versions tend to be slower due to both overheads and lower spec hardware. On the other hand, when this breaks I'll likely be in trouble for support....but how is that different to owning an Infiniti anyway
×
×
  • Create New...