Jump to content
SAU Community

Quality USED GTR parts Nismo Trust Apex HKS

calvintys
 Share

Recommended Posts

calvintys Experienced

calvintys

Posted
Posted

I have the following below parts for sale.

1.One set of USED Trust H-Bean Con rod with 21mm pin for RB26 with standard crank (complete with Trust bolt or anything when you buy new from Trust). Perfect working condition, will provide full refund if find any error on the rod or anything that it does not give you satisfaction. = $1800

2.One set Trust Piston with ring with 21mm pin and diameter is 87.5 pie (2657cc). (Complete with Trust bolt or anything when you buy new from Trust). Perfect working condition, will provide full refund if find any error on the piston or anything that it does not give you satisfaction. = $1400

3. SOLD

4.Complete set of USED HKS EVC 5 boost controller, perfect working condition = $700.

5.USED Apexi Power FC with Hand controller r32/33 gtr (In BOX) = $1000.

6.SOLD

7.SOLD

8.Stock GTR Intercooler with sign of being repair due to some crack issue on Fin. However there is not leak or anything now. It is in a good working condition and will also provide full refund if it leak. $360.

Contact [email protected] or 0418 388 125. Melbourne CBD.

Cheers

Calvin

GTRgeoff Grand Master

GTRgeoff

Posted
Posted
6.Used 6 nismo 600cc injector with standard GTR fuel rail and resistor pack = $700 (The fuel rail and resistor pack is for those whom wanted to install it on RB25DET.)

Are you still interested in selling these? Call me on 0408 124 767

calvintys Experienced

calvintys

Posted
  • Author
Posted
how old is the piston kit? so it comes with everything i need? can i get your phone number? thanks

The piston has done less the 3000 KM. If you look at the piston head it still look very new as in No mark or nothing but there is some fine mark on the piston wall. Yes it came with everything you need. All genuine trust parts. My contact number is 0418 388 125.

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Black_CSR
      Wheel Sizes & Offsets For Skylines

      By Black_CSR · Posted

      ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..   
    • GoHashiriya
      From Japan and back to Europe, my sh*tbox R34 GTT

      By GoHashiriya · Posted

      Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Kinkstaah
      WTB R34 GTR Guard Liners

      By Kinkstaah · Posted

      Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • itsmeyo
      WTB R34 GTR Guard Liners

      By itsmeyo · Posted

      Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • The Bogan
      NC MX5

      By The Bogan · Posted

      I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...