Jump to content
SAU Community

Recommended Posts

Hi guys,

Yesterday I was changing illumination globes as half of them had blown, so carefully pulled out dash and cluster.

But when I next drove it I had no power steering or speedo (everything else on cluster works other then k counter and speed.)

I was very carefull and plugded it all back in and even double checked.

Checked all fuses that I could find but all fine.

please help if you can.

Thanks

Link to comment
https://www.sau.com.au/forums/topic/55994-r32-sedan-no-speedo/
Share on other sites

do the R32's use electric speedo's or was there a big cable thing going into the back of the cluster.....sounds like something is not plugged in correctly.....you are simply going to have to remove the cluster again and check everythin you touched the first time around.

Are you sure you clipped the speedo drive into the back of the speedo. You have to engage the square centre properly or it will pop out.

I think this is the only thing that would stop the speedo from working.

I'm not sure how this would affect the power steering but maybe it requires some sort of speed sensing to operate properly.

i got the same prob right now

took it to my auto electrician and told me that it is cable driven and that the cable and sensors near the gearbox seem to be fine, he said the problem could be within the cluster itself.

I havn't had time to get it checked out, so i would be interested to see how you fixed it.

Yeah, look for the lil spring that goes wid the cable and the speedo cluster when u connect the 2 togetha... if it's not all connected u won't have a speedo, odometer or power steering (trust me :()...

There's a lil white thing that goes between the cluster and the cable and there's a spring in it... make sure that springs there and that it's all plugged in right (it's a bitch to do - took me bout 10 goes! lol!) and then bob's your uncle!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Have a vb in honour of the car comming back
    • It was a great, but typical track day, and some VB was ingested at the night time debrief 🤪
    • And so, to round this out, I couldn't be happier to confirm @MBS206 has decided to buy the car. He drove down from sunny QLD with a trailer last week and it is off to its new home today. I'll let Matt confirm on next steps but I understand broadly that the plan is to leave it pretty much as is, and just get some quality wheel time with a nicely balanced car that is pretty much track ready. There are a few a jobs still to be done first but nothing too major and I think its a very smart buy Dinner last night at the Paragon with a round of VBs (mostly) for Neil
    • Well, 50 pages and the end of a chapter for this car. We took it out for a shakedown at Wakie yesterday, and everything went well. There were a couple of niggles: - Oil cooler fitting leak - tightened, cleaned, stopped leaking - Radiator cap overflow fitting was leaking....Mark called it, the overflow fitting was threaded in and not tight....tightened, tested and held pressure - Small oil leak at the rear of the block, probably the turbo oil feed - too hot to get at it comfortably but probably just needs to be nipped up - leak at the driver's side rear brake line where it meets the hardline. Fitting wasn't loose, so Matt backed it off and back on, no further leaks - there's also a leak somewhere on the top of the fuel tank, maybe that cross over fuel line - that was has been left to fix when its on a hoist Otherwise than those niggles the car went great, turned great and stopped great so it was a very successful day out. I'm always really nervous when a car first hits the track after a long break, especially with a brand new engine as well but it was great. VID-20251011-WA0007.mp4  Big thanks to @The Bogan who dropped by and helped out, @MBS206 and my nephew Lachlan the apprentice.  Neil's wife Mel also surprised the hell out of all of us by dropping by; she's up in Tamworth these days but was travelling to Melbourne so had plausible deniability for turning up at the garage, it was great to see her but also obviously a bit sad all round.
    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
×
×
  • Create New...