R32 Rb26dett to R32 Gts-4 problem

[cheesey1x]

Has anyone auctually swapped a Rb26 into a Gts-4? I have seen many of them on the streets as sleepers and all over the yahoo auctions. so far on my project I have Installed the Rb26 and and seated the tranny and everything...

The only thins that i needed to swap:

tranny

2 A/C compressor lines

throttle cable

I had to modify the bracket for the foward power steering line.

starter

anit-lock control box

ECU and engine harness

The Drivetrain was identical other than the Diff....

however the car did not crank....

I'm getting fuel and spark.....The cars electrical system works fime. All the lights turn, The A/C blows air. The radio turn on. All of the electrical connectors match except one on the car harness side. There are 2 big whtie connectors on the GTR harness right by the power steering fluid cannister next to the Air flow sensors.. The RB20 and my car harness have only one plug in the same area... Can anyone shed some light as to what this plug is for os what other electrical things i need to swap from my rb20 harness???

I will post pics one i get them back from the developer

Once its done i will have a 550hp Gts-4 door.....

please help!!!

[sydking]

Bump!! can anyone advise on what throttle cable is needed, Hit this problem aswell.

[r32-25t]

You need the Gtr throttle cable

[sydking]

Ive got a r33 gts4, any idea if i need a r33 GTR cable? cheers

[r32-25t]

You'll need the cable to suit a 33gtr just not sure if the r32 or 34 ones are the same as it

[sydking]

Ok so cable to match the car not the motor, As its from a 26dett 32gtr.

Gahh bloody GTS4 is a headache sometimes mixing and matching gtr/gtst parts.