Jump to content
SAU Community

Recommended Posts

I've done about 5,000kms since I bought my Skyline, so its about time to do an oil and filter change (previous owner had the car serviced just before I bought it). So I was just wondering what oil and filter people would recommend for the Skyline. I regularly used Mobil 1 synthetic oil and a basic Ryco filter for my old car and thought it did the job well, but I've heard from quite a few people that Motul is the go for Skyline's. Can anyone confirm?

Also, what viscosity oil is best to use?

Thanks for the help.

Link to comment
https://www.sau.com.au/forums/topic/56851-oilfilter-choice/
Share on other sites

Not trying to sound rude but there are alot of threads about oil choice and filter choice here already. Try searching!

If you're lazy then I use motul 8100 5/40 with a JIC (j-brand) oil filter. Ryco apperantly are shite - I must admit so far when I used a Ryco for about 200km my fresh motul came out black as the ace of spades. I've been using my JIC one for about 400km and the oil is still golden brown (texture like sun..).

Might be coincidence may not be - the JIC one was more expensive.

PS: I have a sr20 but I'd use the same thing on a RB.

Link to comment
https://www.sau.com.au/forums/topic/56851-oilfilter-choice/#findComment-1099761
Share on other sites

Use a Nissan filter. You cant go wrong with them.. I wouldnt trust Ryco. In my experience they are shit.

Motul are a good oil company. Their 8100 series would be ideal for your car and you can easily do 10,000k intervals on those oils.

Link to comment
https://www.sau.com.au/forums/topic/56851-oilfilter-choice/#findComment-1102338
Share on other sites

I always used a ryco filter.

Z145A. No problems yet.

You'll find there is much debate wether which oil is better than the other. I dont think there much all that differnce between them (with in reason mobile, motul etc.). If u plane to change it every 5000k's it probably not worth spending big bucks on top line top brand oils.

But If your loaded with cash and money no object than its a differnt story.

I using a Penrite semisynthetic oil Hpr5

5w 40

at the moment. And i dont have any complaints or problems.

Link to comment
https://www.sau.com.au/forums/topic/56851-oilfilter-choice/#findComment-1102477
Share on other sites

I use ryco an havent had any dramas. I went to a ryco info night for work, and comparing to other popular filters on the market there either as good or better. I was even under the opinion they were cheap an nasty until I saw all of there research and comparisons...

Noticed a ryco filter on the orange S15 (when i saw it @melb autosalon)with a AWSOME RB26 under the hood thats on the cover of autosalon magazine.....so they cant be that bad

:D

Berin

Link to comment
https://www.sau.com.au/forums/topic/56851-oilfilter-choice/#findComment-1111867
Share on other sites

I tend to use a 10w 40w oil.......(RB20det)......i tend to also stick with sem synthetic simply due to the lower cost........NOTE: I service my "normal" car (R32) every 5000klms with general driving, very little thrashing. But service the "drift " car every 2000klms.

I really don't see the need to sepnd double the amount when the oil is coming out looking nearly as good as when it went in.

Link to comment
https://www.sau.com.au/forums/topic/56851-oilfilter-choice/#findComment-1111913
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Wife wanted basket things in the wardrobe in our temporary house. Thought about ripping our the wardrobe and fitting the entire IKEA set, but it's a temporary house and we want to move in a few years. So IKEA advertises this as a 50cm unit, however the actually basket and rails measure 46cm wide. Only issue was depth, IKEA stuff is quite deep, where as the builder special junk is super shallow at less than 40cm. Send it, chopped the rails, then offset the mounting holes, job done, happy wife, less shit scattered all over the bedroom. Did the same to the other side too. Also drove the Skyline shit box today, dropped off oil at Supercheap Auto. I didn't realise they only now take max 2x bottles per visit. I visited 2x Supercheap Autos.  
    • I've seen similar actually in my situation. You never know what tables are attempted to be used when the car thinks it's -99C or +200C. The fail state is not usually that extreme but you know what I mean - it was in my case though! This is where being able to read all the sensors is useful cause you see this stuff really quickly.
    • The above is very important. However as long as you keep timing relatively low, it's plausible to make your own knock ears and plausible to learn to tune with a modern ECU that can do wideband O2 correction like a boost controller. I mean if you only have one viable road to even drive the car on, learning to tinker to this level may be worth doing given you can't do much else with the car...?
    • I find the fact that the rear plate has to be bent inwards at the rear not so bad: but the front is just awful: It's like come on. (these are my very old, now retired/turned in plates) TBH it is a lot of money to fix a minor issue, the fact I said "I'll never really spend the money on doing this" is why people ended up buying them as a gift for a 'car guy' who can be hard to shop for.. for car guy things.
    • I just bent the ends of my premo plates. It even went through Regency like that after the engine conversion and the inspector (a great bloke!) just squinted his eyes and said "I didn't see that". Plates, and how they look, are just something that have zero importance to me.
×
×
  • Create New...