Jump to content
SAU Community

WINDOW MOTOR Q's??? DOES ANY1 KNOW ABOUT EM!!!!!!!

85URK

By 85URK,
in R Series (R30, R31, R32, R33, R34)

 Share

Recommended Posts

85URK Grand Master

85URK

Posted
Posted

hi, just wondering if the window motors on a R33gtst are a sealed unit or not?? bcoz my auto elect said he can replace the brushes in it if its not a sealed unit?? can anyone help with this. (ive read all the post on window motors) and by the way does any1 know how much it costs for a secondhand motor if they are a sealed unit and i cant do it that way??

(B1) MR_fanny Grand Master

(B1) MR_fanny

Posted
Posted

no theyre not a sealed unit...very easy to open. my old one looks like it only needs the bush replaced to work again. prices vary from 120 -150 and u can interchange the passanger/driver motors with each other by swaping the gears around.

RadiuM Experienced

RadiuM

Posted
Posted

just for reference.

the r32 motor is the same as the r33 motor, but the unit connected to it with the plastic cogs in it is not. I found this out on the weekend when i scored a r33 unit for free from a mate only to find it wasnt my motor that was munted, but the plastic cogs :cheers:

so if anyone has the unit, you have a buyer right here!

Shaun

85URK Grand Master

85URK

Posted
  • Author
Posted

thanx guys for your help. i got quoted $285 for a secondhand motor 2day for the passenger side door!!!!!is that way to expensive for a secondhand motor?? or is that around what they sell for. if any1 knows let me know a.s.a.p plz. if my auto elct cant fix it his way, il have to get 1, and that price wasnt from him, but if they are that expensive, i wana know if im getting ripped by any of them thanx again.

RadiuM Experienced

RadiuM

Posted
Posted

i have a spare one at home which is a mates, i will contact him today.

He will most likely want around 100-150 for it as he bought the whole window unit that lifts the window up and down aswell.

Shaun

85URK Grand Master

85URK

Posted
  • Author
Posted

um i read that u have to change something in the driver side to the passenger side one if u swap sides. and also i just bought 1 today! for $285!!! damn!!!!!! bcoz my auto elct said he could only get one through his supplier and it was $365!!!!!!!!! and thats just the motor with no window regulator (have 2 use old stuff) so i thought i had a good deal!!!! so i went and got the one for $285 and it has a window reg and all with it. damn seciondhand parts should be controlled by someone, the wreckers are going out of control with pricing! one will sell you something for a good price and up the road there charging 100's more. its crazy. oh well, thanx for trying anyway. it goes in on friday to get fixed. hope i never have to fix one of these again. xpensive buggers!!!!!!!

(B1) MR_fanny Grand Master

(B1) MR_fanny

Posted
Posted

i got it off demon who was wreckin his gtr and it was only the motor that i needed, he gave me a very good and fair deal, it would have come with the attaching arms but i didnt need it ......why replace everything else when it aint broke..thats my logic:D:D someone esle here on the forum picked up one from a wrecker for $120 just the motor.

85URK Grand Master

85URK

Posted
  • Author
Posted

well mine is all fixed now. but when i went to pick the car up the auto elct said he had bad news for me?? i said what is it?? and he said i think your master switch on your driver side is stuffed too, coz he couldnt get the passenger side window to go up or down on either switch, but the driver side one was still going and the door lock thingy. so i took the car and started to drive home and when i was a the lights round the corner, i seen the lock button for the passener window was on!!!!!!! so i went back and told him , and now he is kickn him self, he spent hours trying to figure out why the was no power going to the passenger window, and all it was was the lock button cutting off the power supply to the window! classic!!! he didnt even think of that, but he tried everything else!!! so im glad i didnt go and buy another part for the drivers window.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      M35 Aftermarket Fuel Pump

      By MBS206 · Posted

      Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Ben_D
      Wanted to buy R200 longnose LSD 3.9 ratio

      By Ben_D · Posted

      Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Ben_D
      Back for more after 18 years - and where are the longnose R200 LSDs?

      By Ben_D · Posted

      Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • sonicii
      G35 Control arm and Compression Rods into a V35 Skyline.

      By sonicii · Posted

      Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...