Jump to content
SAU Community

Recommended Posts

Hi all,

Just want to see if there are many people here who want to get a big bosch fuel pump?

Saw all the interest involved with the walboro pump group buy - I didn't end up going through with it as I want to go further in power outputs than the walboro can deliver.

I don't have anything to offer as yet - at the moment I'm overseas in England but will be in Aus in jan - will need a pump by then though as I want to dyno.

Just want to see how many people are interested as my dad's in QLD and can do some looking around.

I can't do much more than look on the internet here - I will try to get in contact with some dealers over the next few days.

The pump?

I was looking at the biggest that'd fit in a r33 - I believe it's the 044?

Any help/input would be great - just thought it'd be a bit of an idea as I've got a bit of time on my hands at the moment as I wait for college results to come back.

Cheers!

Link to comment
https://www.sau.com.au/forums/topic/57198-bosch-hi-flow-fuel-pumps/
Share on other sites

Hey GTST25,

i can get 044's for $325 + Postage if there is 10+ units sold, i may be able to get a better deal i will just have to ask my supplier if he can do any better than that for me.

Steve

X GTi-R X

Hey GTST25,

i can get 044's for $325 + Postage if there is 10+ units sold, i may be able to get a better deal i will just have to ask my supplier if he can do any better than that for me.

Steve

X GTi-R X

That sound allright,

I haven't done much here - been pretty hectic at college.

Will try over the next few days - that sounds like a good price though so I'm in if you want a number for the ten!

Cheers

Hey GTST25,

i can get 044's for $325 + Postage if there is 10+ units sold, i may be able to get a better deal i will just have to ask my supplier if he can do any better than that for me.

Steve

X GTi-R X

Can your supplier do better than that? Is this group buy going ahead?

I have a supplier who can do minimum of 10 x 044's for $360/piece delivered.

Can also get minimum of 10 x 040's for $285/piece delivered.

Obviously phat32 prices are better but nothing has come of it yet. I will wait for a response and if nothing then I will offer the group buy myself.

:)

Hey,

i can get them for $330 per unit delivered, 040's i can do for $225 delivered.

Steve

They seem to be good prices, let me know if you're doing a group buy on both of these bosch pumps.

  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Similar Content

  • Latest Posts

    • Hope you aren't too sore after that one, might take a day or 2 to notice yet and I guess it is a loooooong drive home. On the bright side, tube frame front end is a thing at superlap, right?
    • https://www.facebook.com/share/p/18rmVb1SKB/ 
    • The chart of front pressure to rear pressure (with one being on the x axis and the other being on the y axis) is not a straight line on a typical proportioning valve. At lower pressures there is a straight line with one slope, and at higher pressures that changes to a lower slope. That creates a bend in the line at that pressure, called the knee point. If you do not change the proportionng as the pressure gets higher, you will suffer excessive pressure (at one end of the car or the other, depending on which way you look at the proportioning action) and then get lockups at that end. The HFM BM57, from my memory of previous discussions, is based on the BM57 from a different car (to a Skyline), with a different requirement for the location of the knee point and the distribution of pressure front to rear, and so is not a good choice for an upgrade on a Skyline. Here's a couple of links to some old posts, one from here, one from elsewhere. A lot of it pertains to adjustable prop valves, but the idea is the same. There are plenty of discussions on here about this issue from al the many years of people wanting a cheap/accessible option. https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/ https://grassrootsmotorsports.com/forum/grm/learn-me-brake-proportioning-valves/236880/page1/  
    • Yeah dunno why johhny posted that here with no context, just post on FB/insta bro where he put it up?  Laine had an off at T4 during Thurs prac, he's ok, car is less than perfect, they are done for the weekend, he can fill in the rest. Bando also binned it like 100m up the road.   
    • I feel there must have been a FB/insta post and the weekend did not start well at all I hope everyone is all okay
×
×
  • Create New...