Jump to content
SAU Community

Recommended Posts

  • Replies 46
  • Created
  • Last Reply

Top Posters In This Topic

sending it tuesday morning. Dont think the post office is open on monday

everyone else

Im picking up coolers on tuesday and sending them tuesday. if you want one let me so I we can trade details.

are they genuine hybrid intercooler?

Hi Guys

My mate has just landed a few thousand hybrid intercoolers. 600mm x 300mm x 76mm. These coolers are exactly the same design as the original hybrid manufactures. The specs you see on those intercooler also applies here.. I will post up some spec soon.

Here are the specs

Attrictive polished aluminum look

3" inlet and 3" outlet pipes for high flow  

Low pressure drop 0.2psi at 15psi of boost

80 psi for up to 800 horses

Made by lightweight but strong material. Same Structure and material used as famous "Hibrid" Intercooler. Weight ~8kg

All coolers have been Pressure tested.

15 bars core design. For more efficient air flow over the older 16 bar design.

2 sizes

Size: 600mm x 300mm x 76mm

NEW PRICES

up to 5 buyer: $330

5 to 10: $300

10+: $295

Size: 450mm x 300mm x 76mm

NEW PRICES

up to 5 buyer: $325

5 to 10: $295

10+: $290

p&h: ~$25 to the east side of australia and $30 to the west.

As seen in the picture the cardboard box has polystyrene strips to protect the fins from transport damage. The cardboard box is even double up in places for extra strength.

Payment must be by Direct Deposit.

Local Pickup is available. Save p&h..

If you have doubt about buying from this group buy do a search for other groups buys with my name. Im sure you will find out quickly Im an honest bloke :D . Also if for some rare reason I can't get the parts and you have already transferred money to my account your money will be transfered back to your account straight away!!

Piping will be available soon for this intercooler. Soon I mean ~1 month..

EDITED Sorry I told a lie. these are genine hybrid intercoolers they came straight out of the hybrid factory!.. Actually right now I have the limited edition coolers. Be quick. and yes it does have the hybrid logo.

piping not available yet.

Guest
This topic is now closed to further replies.



  • Similar Content

  • Latest Posts

    • The wiring diagram for the R33 RB25 is freely available, and is essentially the same same as most other RBs (just with differences as to which pin # does which job). To get the ECU to power up, you just need to provide power to the ECCS relay, and have the other power feeds that come in from the top left of the wiring diagram (wrt the ECU) that give perma power to the fuel pump relay, the ECU itself, etc etc, all connected. When you put power on all these it will just come to life. It's pretty clear from the diagram what needs to happen. Just follow the lines from the 12V + supply stuff in the top left over towards the ECU. I've even posted snips of such diagrams (not for vanilla 25, I think for Neo and 26) to various threads here in the last few months, talking about what it takes to get the fuel pump and FPCM up and going. Search these up and they will help get you started on doing the same with the vanilla 25 diagram. Hell, for all I know, I've done the same with that one in years past and have forgotten.
    • Yep...so unless someone posts up the answer you will need to probe from the ECU connector to the dash plug with a multi meter in continuity mode to trace the wires.  Note the ECU has multiple - and + (and across different key settings - Battery, IGN and Start) and most likely the power is fed from the connector(s) that is normally near the left hand headlight.
    • Thanks Duncan, I am actually just trying to get the Rb turning and running with the RB25DET S2 original loom itself  I am just trying to get it going outside the body and not thinking about the S15 or trying to match anything to the S15 loom at all I am only trying to see if anyone has done this and what pin they found to be the ignition trigger and ECU+/- on the dash connector, that's about it. Thanks  
    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
×
×
  • Create New...