Jump to content
SAU Community

400R Front Bars from $150 (PICS)

Malecki
 Share

Recommended Posts

Malecki Rising Star

Malecki

Posted
Posted

FULL KIT $550!!! SOLD( will make more in mid january)

I have two remaining 400R front bars, the rest have sold, need to sell this week as i'm goin overseas next wednesday

They are raw and need to be primed and painted

One is selling for $150 as it has a few cracks in the gel coat

The other is $200 (both are the same design)

http://www.carsales.com.au/pls/carsales/!q...ype=0&ad_type=1

Link to comment
https://www.sau.com.au/forums/topic/58004-400r-front-bars-from-150-pics/
Share on other sites
Malecki Rising Star

Malecki

Posted
  • Author
Posted

No difference in s1 or s2 front bar, i did have two different designs but only one is left, if you want to change your front bar, u can buy nismo or gtr blinkers wich fit into the 400r front bar

  • 2 weeks later...
  • 3 weeks later...
cooky2511 Contributor

cooky2511

Posted
Posted

very interested in a 400r front bar.

Do your bars have the vent holes on both sides?

Ive seen the pics that are posted on car sales but cant tell which ones your still selling, any chance you can post the pictures of the ones you have left.

cheers

Malecki Rising Star

Malecki

Posted
  • Author
Posted

i will be making more kits in late january, full kits will be available for $750, they will be brand new in perfect condition with no gel coat blemishes, unlike this one which is why it was sold so cheap, also will have other kits, depending on what moulds i get from japan, and also bootlids that sit level with sides will be available (no need for drift wing) EVERYTHING WILL BE AVAILABLE LATE JANUARY

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      Reading through the engine service manual their advice is do a cylinder balance test. Unplug one injector at a time and see if the idle drops a consistent RPM. You can also do this using a Consult cable which is easier. They also call for unplugging the power transistor, then with the engine off and the fuel rail unhooked from the manifold verifying that you have good fuel flow (even injection, no dripping/leaks, etc) when you twist the CAS by hand. Also verify the spark by pulling the spark plugs and allowing the plugs to ground and turning the CAS by hand. I would also start doing the sensor checks and idle valve checks in service manual. Make sure the MAF tests reasonably, the intake air regulator is sane, etc. You may have to get new spark plugs.
    • Dose Pipe Sutututu
      Valve clearance for RB25det series 2

      By Dose Pipe Sutututu · Posted

      This sounds very old of me, however since buying the Tiguan shit box, my view on shit boxes have changed.
    • Waders360
      M35 Brake caliper replacement

      By Waders360 · Posted

      I've looked up the parts number (41011AL501). It's around $700 OEM. Usually our Infiniti G35 here in Canada have interchangeable parts with my Stagea but the parts number are not the same. I have looked around and it seems the JDM 2005 V35 Skyline (which is the same as our G35) has the same caliper but I cannot confirm. And I can't find a repair kit. The inner brake pads drags on the rotor, seems to be rusty piston. Thanks for the info by the way
    • GTSBoy
      Valve clearance for RB25det series 2

      By GTSBoy · Posted

      This coupled with 6-9 speed autos with ridiculously short gearing is why these modern shitbox cars always seem so fast off the line. If it wasn't for those things, Raptors would not seem fast. The problem we have is there is a driveability gap between a more gentle take off and a wheelspinning sideways launch. The difference between ankle flex required to achieve one and ankle flex required to achieve the other is about 0.5°.
    • Kinkstaah
      Valve clearance for RB25det series 2

      By Kinkstaah · Posted

      Yeah I think I'm also with the opposite here. It's 'hard to keep up with traffic' because in the real world I'm accelerating with 15% throttle and they are pinning it. It feels like I'm being an overt dickhead at anything above 15% throttle, so the car sounds like I'm being an overt dickhead to keep up with/get ahead of traffic when I'm really just trying to drive with traffic. There would be no issue 'keeping up with traffic' if we used the same level of throttle input/aggression to drive around. People really do just drive around with their foot nearly pinned in econoboxes.
×
×
  • Create New...