Jump to content
SAU Community

Recommended Posts

The first number is the COLD viscosity, the second is the HOT viscosity. The oils have additives to change the viscosity with changing temperature.

Its debatable how low you need the cold viscosity. a low number means that the oil will be circulated quickly from a cold startup. But a higher number (thicker when cold) is likely to hang around better, so not need the ability to quickly circulate when cold.

I think the quick circulation factor usually wins out.

A 5 is really the lowest you [b:adb267e0b1]need[/b:adb267e0b1] to go in Oz, unless you are up at Perisher or something (then you might need a -5).

Probably what's more important is the API specification (like SG/CF or something like that) I think the latest is something like SJ/CF (anyone?), and indicates the level of protection that the oil gives. The 'no brand' oils (KMart, etc) are often only SG or SH API specs, so steer clear of them.

Link to comment
https://www.sau.com.au/forums/topic/584-oils-for-skylines/#findComment-14203
Share on other sites

Yeah, SJ/CF is the current standard. SJ is expected to increase to SK in the future but the diesel rating, CF is expected to stay the same for some time.

For more info:

http://www.salemboysauto.com/faqs/faq-29.htm

Recently, I've been hunting around to find the reconmended oil type for Skylines. Mobil Japan suggests 5w50 or 0w40 for all 2.5L-3.0L multicam turbo engines. (I think... I can't read Japanese :P ). Heres a pic for reference:

http://www.mobil.co.jp/club_mobil_1/lineup/lineup.html

0w40 is probably only meant for the colder parts of Japan, but Mobil Australia also suggests 0w40 for the R32 GTR (the only Skyline on their list as it was locally delivered).

Mobil Aus GTR sheet:

http://www.datateck.com.au/lube/mobil_au/d...ke=36&Model=820

I'm going to hazard a guess and say, for all turbo twincam RB's, 0w40 during winter (in cold areas) and 5w50 otherwise.

Link to comment
https://www.sau.com.au/forums/topic/584-oils-for-skylines/#findComment-14204
Share on other sites

I have been using the Mobil 1 0W40 for about a year now. Good stuff.

This is not the same Mobil 1 that K-Mart etc sell. It's a grade above that. You may have to order it in from a Mobil supplier.

It's about $16/litre but it's worth it.

When I get the Mobil sock number I'll post it up.

Most of the Nissan dealers sell the oil filters for about $7-$8. Better than the Repco price (about $12).

Link to comment
https://www.sau.com.au/forums/topic/584-oils-for-skylines/#findComment-16518
Share on other sites

I didn't realize Mobil1 0w/40 was that expensive. Royal Purple 5w/x is also around $16 a quart (~1 litre).

Oil filters... I always use genuine parts instead of the Ryco equivalent. When it comes down to it, Nissan is interested in making their engines last, while Ryco is interested in profit. Plus, the fact that genuine oil filters are cheaper doesn't hurt :cheers:

For reference in Perth, Royal Purple is sold by Lance Distributors (9458 2239) and Red Line is distributed by Red Line Oils (9446 4455).

Link to comment
https://www.sau.com.au/forums/topic/584-oils-for-skylines/#findComment-16892
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm seeing torque specs all over the place for the OUTER tie rod, but none for the INNER tie rod, where it connects to the steering rack. Even in videos, people are just tightening em up as much as they can with a wrench and that's it. Anything tightened down without torque makes me nervous. Anyone know what the spec is for it?
    • Hope you had a great time here in our tiny country.   The JDM scene we have here is quite small, it's mostly BMW, Volkswagen with burble tunes haha. But the few JDM cars we do have in the scene are pretty nice. Some of my friends drive cool s14's too. Both built engines, red one makes abt 500, blue one abt 400 i think?
    • Ye good idea , would have never thought of something like that. Might aswell do it to every pulley and the balancer while I’m there 
    • Use an LS1 or similar, via kit like Frenchy's. But.... It's probably not the alternator. It sounds like belt squeal, which would be because the pulleys are glazed. Rub every groove on the pulleys with 120 grit paper. Report back. Oh, and new belts afterwards too. The old new ones will be shitted up already.
    • Hello all I have 2 r34 sedans , one turbo one na, only recently aquired the na 34.  Man what is with these things.... My turbo 34 started sounding like a super charger, it was screaming at anything above 4000rpm , I took the alternator apart and replaced the front bearing which is the only one I think you can access and it did not fix the issue so presumably the bearing in the rear of the alternator is gone. ( diagnosed it was the alternator by taking off the aux belts one by one to figure out which pulley or bearing it was )  My friend gave me one he had lying around, Installed it , it did not squeal for maybe 500kms and now its started to squeal again briefly on startup  Recently got an na r34 and I replaced the timing belt, water pump + all the auxillirary belts. Runs amazing but it suddenly developed the same squeaking problem but significantly worse, Ive had my neighbour come down screaming at me because it was waking her up everytime I moved the car. It takes a good 2 minutes before it quietens down.  Im yet to diagnose where its coming from but im fairly sure its coming from the alternator aswell. My question isnt about how to fix it but rather where can you get a new alternator for an rb25 neo??? Ive searched everywhere but I havent been able to find a direct fit oem type replacement thats not genuine. All the automotive stores sell an oex one - BXA035 - which I picked up for cheap through a friend with staff discount , got it home only to find the connector is completelty different.... As far as im aware bxa035 is for rb20/30's and after a bit of figuring out the bxa035 has an ev14 type connector, which is tiny compared to the rb25 connector. I actually had an ev14 connector lying around which I was considering just replacing the bigger plug with to get the alternator working but the bxa035 is rated for 70amp vs the rb25 alternators are 90amp ( or so ive been told ? ) That paired along with the fact im about to install an amp + sub in the back and I have the stock sized small battery Im not sure itll do the job unless anyone has another opinion?  I know and have seen all the websites selling the ls1 alternator conversion kit but I am not going down that route, nor do I have the money to. Hopefully I can figure out how to get 2 brand new alternators for both cars. I would buy second hand which there seems to be many of but considering how common this seems to be im sure If I installed a second hand one it would start squealing in no time  Or even better if anyone knows how to fix the issue directly with the alternator itself... Any input appreciated Thank you     Link for bxa035 connector picture
×
×
  • Create New...