Jump to content
SAU Community

Recommended Posts

I need the following parts:

Air con Drier bottle

Air con Thermo fan

Front Bar Support

Alternator

Air con condenser Rubber mounts

Air con condenser

Intercooler

Rear seatbelts (complete)

Rear Discs

Front Lower Lip

Radiator Support Panel

Radiator + Rubber Mounts

Idler & Tensioner

You can contact me on 0421 284 330 or via PM.

Thanks for all your help so far guys,

-Patrick

Link to comment
https://www.sau.com.au/forums/topic/59838-need-r32-gtr-parts/
Share on other sites

Ive got pretty all of that that you want.

Radiator done about 1000kms brand new.

Air Conditioning got all of that if you want compressor i think it doesn't work. But all else works including rubber mounts, drier bottle & Thermo fans.

Where in Melbourne are you??

Ive got pretty all of that that you want.

Radiator done about 1000kms brand new.

Air Conditioning got all of that if you want compressor i think it doesn't work. But all else works including rubber mounts, drier bottle & Thermo fans.

Where in Melbourne are you??

I'm right near the north end of the ring road - Greensborough. When can i organise to see you and we will talk prices. I could even see you today if it suits, give me a call.

-Patrick

  • 2 weeks later...
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...