Jump to content
SAU Community

Recommended Posts

hey every1,

well im thinking about getting a FMIC and i just talked to my m8 who's an engineer and he said he will make the piping for me for free (i dont evan have to pay for the pipe) so what i need to know is does n e one have instructions on like where to bend n how for to bend down and what size pipe i need, and how much of it?!?!

n e help would be greatly appreciated!!!

- Greg

i have a VL berlina with a RB20 if that makes n e difference

Link to comment
https://www.sau.com.au/forums/topic/61091-free-intercooler-piping/
Share on other sites

there is no easy answer. pipe shaping is dependant on the car, and the way you wanna run the pipes e.g. through the guard, over the radiator (if there is room). You have to work it out for yourself.

That is why companies can charge so much for them. It's not just the cost of the piping. It's the cost of working out how to make the pipes. Say for someone making $200 a day, they'd be better off just buying a premade one, because i'tll take you a day, and the money you'll save will be the same as the money you woulda made.

Intercooler piping should be cheap as anyway.

For a mates car I just bought some preformed 3 inch 90 deg mandrel bent ally pipe and a couple of straight sections. Then measured and cut it up and took it down to a local fabrication shop to be welded. Polished it on a buffing wheel, laquered it, fitted in under 2 hours and thats it. Looks just as professional as anything I have seen and after 6 months on 15psi it's still working (and looking) like the day we installed it.

So to answer the question, the best way to work out where things should go is get your pipe, start at the turbo side (or where you plan on starting your piping from) cut the pipe section, tape it in place (silver plumbers tape works really well), cut the next section and so on untill you get to the end of your pipe run. mark and number the sections then send them off to get welded.

The other option is doing a detailed CAD model of the front of the car, draw in the piping then export the parts to a 2D construction drawing. First option is prolly eaiser for a one off.

So I'd reccomend making your own piping, a hack saw, metal file, pipe vice (preferably), a bit of hand eye coordination and a scriber is all you really need.

Lot cheaper, just as professional and this way you can tell all your mates you have custom intercooler piping :P

My guess, definatly not thicker than 2 mm in stainless, the pipes are not structural and the pressures are not high, they will just weigh too much if thicker than 2mm, thats why I would use ally. You will not find it easy to get 2.5 - 3 inch stainless steel mandrel bent pipes (ally would be eaiser to find).

Actually Stainless mandrel bends are easy as to get :cheers:

Plenty of them around.

Are you referring to thickness or diameter of the piping?

Thickness as previously posted, no more than 2mm.

Diameter, depends on quite a few things, length of piping, future upgrades, etc etc, but 2 1/2" is probably your best bet, with maybe a small 2" run from the compressor outlet on the turbo towards the cooler.

The smaller the piping, the less the lag.

Smaller amount of area to pressurize.

It only needs to be as big as the smallest part of your inlet tract.

If the throttle body is only 60mm then 2.5" would be perfect.

BASS OUT

Yeah, your right on the 2.5' SS bends, its just exhaust tubing. I was once looking for 3/8 mandrel bent SS with 0.8mm wall thickness for motorbike headers, that was hard to find. Somehow I got the two confused. duh!

No one was willing to try and mandrel bend 0.8mm wall thickeness tube for a reasonable price, it just crumples up like ally foil.

So I'd reccomend making your own piping, a hack saw, metal file, pipe vice (preferably), a bit of hand eye coordination and a scriber is all you really need.

Lot cheaper, just as professional and this way you can tell all your mates you have custom intercooler piping :)

yeah my m8s rekons he's going to pay for all the piping n shit n e ways coz he just paying me back for sum shit i did for him last year, so ill just take it around to his shed one sat n away we go i gotta get my cooler 1st... does n one wanna sell me one? 450 * 300 * 76 is what im after

go stainless steel man .... Geordi Stainless Steel sales in Chelteham (melb) .. has 2.5inch pipe for pretty cheap ... 90deg are 18.50 ..45deg are 16.40 .. reducers 3" to 2.5inch are 11.50 .. 2.5 to 2.0 are 9.50......ring em up 9553 2000 (131 Herald St Chelteham)

Matt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • 2001 BE5D Subaru Legacy B4 RSK (3rd gen) EJ208 (pink injector) Twin Turbo 280PS 5-speed manual Full time 4WD "RSK" grade which means all of the above LQC option which means stock rear spoiler  I got it primarily to export to someone outside Japan who was interested. These BE5 Legacy B4 RSKs are going through a bit of a resurgence right know in Japan as they are one of the few cars from the "turbo, manual, RWD/4WD, 280hp gentleman's agreement era" cars that don't require stupid money to purchase. Which for some people might be a good opportunity to get as a base for restoration. If I can't find anyone to purchase it I will certainly be doing that myself over the long term. Why? Because it's properly fast in stock form, handles well enough for a GT sedan, there's still enough aftermarket and (if you can wait a while) genuine part support to make it a restoration candidate (<-- that will only get worse over time so it's a case of do it now or choose get a BL5 4th Gen). Mechanically it's fine, has only 89,200kms on the odometer. The problem with this car is that the body and exterior trims are weathered from at least the last 10 years being parked outdoors. I'm the 3rd owner, the first owner was the one that had it for 14 years and barely drove it, had a low-speed front impact (which didn't damage anything behind the radiator support) and got it fixed and sold it. The 2nd owner put most of the kms on it and parked it outside for the last 10 years, hence the door rubbers have seen better days but if you overlook those cosmetic details, it presents pretty nicely. There is some minor rust on the LH rear wheel arch which I'll have looked at too at some stage.  Also as you'd expect from a car this age, the clear top coat is gone, leaving a satin finish on the roof.  Mechanically it's fine (as you would expect from a car with less than 100K kms) but the steering does feel slightly vague around the centre position at higher speeds. So first on the list is to get the steering rack bushes looked at. There's also the Lock button on the remote which doesn't work, but the Open button does.... it means that the anti-theft system thinks it's always open? It seems like if you open the car and don't start the engine within 3 mins or so the anti-theft kicks in again without any beeps or signals. So if you got to start it after that, it won't. You have to push the open button again. That's how I understand it anyway. Just a small irritation but not a big problem to sort out. There's only one mod, the Wangan SPL muffler. Just a tad louder than stock. It's a really good mod for those who don't want to wake the neighbours but still want to hear a more prominent unequal length header EJ20 sound. Anyway I hope to get all those things done eventually, that is unless someone wanted to import it to their country from Japan (where I live). I'm open for negotiations as I really would like a Skyline... but this will definitely suffice in the meantime 🙂 *Disclaimer: This is how I picked it up from the dealer, minus the stuff on the back seat. I haven't cleaned the engine bay or done a thorough exterior clean, aside from spray painting the wipers. 
    • Wow, even with the Audi logo centre caps. I love OEM wheel mismatches. 
    • Welcome!  Can't go wrong with a Stag.
    • Looks good. Nice height.
    • Hey all, a little help from the Stagea hive mind plz.. I'm days away from buying either a 2002 Stagea 250tRS AR-X Four, premium leather, power seats and all the old switches etc that go with it, or a 2002 Stagea 250tRS VR-X Four AERO, pov pack, cloth seats etc, with coil overs, sports zorst, comes with original zorst and suspension and parts. (I think I've got the models right?) Both are VQ25DET, have 160000kms, both straight no rust both with $2000+ in recent servicing receipts, both ride on aftermarket 18" rims. The Aero has a replaced turbo as well. I like the cool factor of the Aero car but the AR-X has never been modified. Neither have been driven hardly at all in the last 5 years. Any thoughts on which one or does it come down to personal preference? davemoto 
×
×
  • Create New...