Jump to content
SAU Community

Recommended Posts

Forgive the newbie question, but what's a reasonable price for an R32 GTR front bar and bonnet?

I got careless and bent the front of my GTS-4 - oops :P I've got a quote from someone local with a GTR half-cut (they are a straight swap, right?), but it's a bit more than I was hoping.

Any ideas?

On a positive note, this gives me a good excuse to get that respray :rant: Now to pick a colour...

Link to comment
https://www.sau.com.au/forums/topic/61109-r32-front-bar-and-bonnet/
Share on other sites

  • 2 weeks later...

Ok, we've sorted that out ($350-400 seems to be a good ballpark figure)...

But no one has been able to give me a definite answer as to whether an R32 GTR front bar will fit without modification onto an R32 GTS-4. Some people say yes, others say you have to swap the front guards as well.

Can anyone give a definitive answer, preferrably someone who has actually done it?

X

I am in the process of doing this now...

A GTR bonnet requires hinges and modifications to the latch (or a GTR latch support).

The front bar will not fit unless you trim the front bar support or source a GTR front bar support. They do need to be squeezed a bit to fit - so make sure you have it done at a workshop that has done this before to ensure that it will look good.

You then have the issue of no grille... To fit the grille, you need GTR headlights as there is clips on them which hold the grille in place.

Bonnet $450-700

Bar $380 - $650

grille $150 - $250

hinges $20 - $80

latch $free - $50

headlights - $150 - $600

I am in the process of doing this now...

 

The front bar will not fit unless you trim the front bar support or source a GTR front bar support. They do need to be squeezed a bit to fit - so make sure you have it done at a workshop that has done this before to ensure that it will look good. You then have the issue of no grille... To fit the grille, you need GTR headlights as there is clips on them which hold the grille in place.

Thanks for the info. Looks like I'll have to talk it over with the guy at the smash repairs. Whichever way I go, it's going to cost - but if the insurance is subsidizing the first few thousand then it might be worth it.

X

I am in the process of doing this now...

 

A GTR bonnet requires hinges and modifications to the latch (or a GTR latch support).

 

The front bar will not fit unless you trim the front bar support or source a GTR front bar support. They do need to be squeezed a bit to fit - so make sure you have it done at a workshop that has done this before to ensure that it will look good.

 

You then have the issue of no grille... To fit the grille, you need GTR headlights as there is clips on them which hold the grille in place.

 

Bonnet $450-700

Bar $380 - $650

grille $150 - $250

hinges $20 - $80

latch $free - $50

headlights - $150 - $600

mr r32

i put the gtr bar on with out modification

also if you change the front quaters you will need GTR blinkers

"You then have the issue of no grille... To fit the grille, you need GTR headlights as there is clips on them which hold the grille in place."

why spend the money on the lights when you could just custom make some clips or brakets for them? or just not have the grill and make it look abit different

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
    • Can I suggest you try EBC directly again and link them to as many competitor catalogues as you can to show their listing is incorrect, eg https://dba.com.au/product/front-4000-series-hd-brake-rotor-dba42304/ If you have access to an R33 GTST VIN and your VIN, you could also use a Nissan Parts lookup like Amayama to show them the part number is different between 33 GTST and 34 GTT which may get their attention
    • So i got reply from EBC and they just this site where you can clearly see those 296mm fronts on R34 GTT. I send them photos and "quotes" that 296mm are not for 34 GTT and they are too small. But it will be very hard to return them cuz nobody here knows 100% and they just copy those EBC catalogue :-D https://ebcbrakesdirect.com/automotive/nissan/skyline-r34
×
×
  • Create New...